Home > HARDWARE > WINDOW & DOOR HARDWARE > FOLDING DOORS/HARDWARE
Choose a sub category:
BIFOLD DOOR HARDWARE SETS BIFOLD DOOR HARDWARE
Sort By:
1
Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8"H aligners and four No.8 x 3/4" Phillips pan head sheet metal screws. Stamped steel bracket mounts into top or bottom track; fits on "Slimfold" and others. Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16"L x 3/4"W overall.
For use on bi-fold doors; mounts to center of lead panel with provided screw. Can be stained or painted. Includes fasteners. 1-3/4"Dia. Stainable and paintable, for use on hollow core or solid wood bi-fold door panels. 1-3/4"D x 1"H. Includes installation screws. Used by many wardrobe door manufacturers. Solid-nylon guide and pivot. 3/8"OD x 1"H base and 3/8"OD x 5/8"H guide tip.
1-1/4 inch x 2 inch, universal bi-fold door aligner, yellow zinc plated finish. Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16"L x 15/16"D x 1-3/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets.
Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 1/4"OD pin with 5/16"H tip and 5/8"H from base to tip. Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8"L x 7/8"D x 1-5/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets.
For steel frame bi-folding doors. 1/4"OD spring-loaded steel rod with 3/8"OD x 5/16"H white nylon guide cap, 5-5/8"H overall. Replaces bottom pivot/jamb bracket pivot used on tap in type hardware. Used on bi-folding shutter doors. Allows for non-mortise installation. 7/8"W x 1"H each hinge piece, 2"H overall. Includes 2 hinges and 8 flat head installation screws.
Fits Kenna Frame doors and others. 1/4"W nylon wheel with 3/8"OD x 1"H nylon base self-adjusts up to 9/16"H from base. 1/4"W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8" OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2" to 2"H. Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 19/32"OD x 7/16"H nylon cap. Spring-loaded, self-adjusts from 1-7/16"H to 2-1/16"H.
Used by many wardrobe manufacturers. Self-adjusting 5/16"W nylon wheel with 3/8"OD x 1"H nylon base. 2-3/32"H maximum. Fits on Acme doors when opening or closing. Steel springs with nylon retainer. For 1" to 1-3/8" bi-fold doors. 4"L x 3/8"H overall Fits Alliance doors and others. 5/16"H square nylon guide tip with 3/32"W slot (7/16" inside slot), 1/4"OD pin, and 3/8"OD x 1"H nylon base. Self-adjusts to a minimum 1-7/16"H overall.
Fits Acme and Cox doors. Spring-loaded 1/4"OD pin, 7/16"OD x 1-1/2"H steel base, and 3/8"OD x 1/2"H nylon guide cap. For 1" to 1-3/8" thick bi-fold doors up to 50 lbs. each. Includes optional guide cap. Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16"L x 1"D x 1-1/4"H overall. Bottom pivot with 7/16" OD stem, nylon base and steel pin that has a 1/2"OD tip with 3/8"W groove. Includes bracket, bottom pivot and 3 installation screws. Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws.
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16"L x 1"W overall. Includes two No.8 x 1-1/4" Phillips pan head screws. For 1" to 1-3/8" thick bi-fold doors. Top pivot snaps into track socket securing door. Roller guide provides smooth sliding operation of door. 3/8" and 7/16" post diameter. Replacement top guide kit fits: Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll.
For use on hollow core or solid wood bi-fold door panels. 1-3/4"Dia. x 9/16"H. Includes installation screws. Steel base; fits Acme and Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H steel base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Fits Johnson doors and others. Spring-loaded top guide and pivot with 7/16"OD x 1-5/16"H nylon base, and 7/16"OD x 1/4"H nylon cap.
Nylon base; fits Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H nylon base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Fits Johnson doors and others. 7/16"OD x 1-5/16"H nylon base with 1/4"OD steel tip. Adjustable, 2-5/8" max extension. Includes clip, 4 door snugger and door aligner.
Non-mortise plated steel hinge to connect a pair of wood doors that are 1" thick or thicker on their edge without mortising. 1-1/16"W x  3-1/32"L. For 1" to 1-3/8" thick bi-fold doors. Jamb bracket provides support for bottom of folding doors. Bottom pivot fits securely into jamb bracket for smooth operation of doors. Top-mount with concealed spring-loaded pin for easy hanging and operating of doors. Steel 3/8"OD pivot and 1/4"OD pin with 1/4"H tip, 1-3/4"H overall. Includes two 1-1/4" nails.
Self-adjusting 1/4"W nylon wheel with steel 3/8"OD base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails. Self-adjusting 1/4"W nylon wheel with 3/8"OD steel base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails. Repair kit is for 3/8 in. diameter holes. Fits 7/8 in. wide top tracks. Kit includes most parts needed to repair one 2 door set.
Wide base prevents hollow door crush, and large diameter allows for easy gripping. 1-11/16" diameter For use on four panel bi-fold doors. Holds doors in line in closed position. For door panels 1" to 1-3/8" thick, weighing up to 30 pounds each. Zinc-plated steel. Spring loaded top pivot and roller guide for easy installation. Permanently lubricated roller guide. Durable pre-painted track. Conforms to ANSI A156.14 type D8622. Includes white, steel track with pivot bracket, top pivot, guide wheel, jamb mounting bracket, bottom pivot, two door snugger, wood door knob and offset hole non-mortise hinges. Screws not included with hinges only. Boxed.
For door panels 1" to 1-3/8" thick, weighing up to 30 pounds each. Zinc-plated steel. Spring loaded top pivot and roller guide for easy installation. Permanently lubricated roller guide. Durable pre-painted track. Conforms to ANSI A156.14 type D8622. Includes white, steel track with pivot bracket, top pivot, guide wheel, jamb mounting bracket, bottom pivot, two door snugger, wood door knob and offset hole non-mortise hinges. Screws not included with hinges only. Boxed. For doors up to 24" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. Plastic base; steel track clip; installs into top track to accepts top pivot pin; fits Johnson "new style" Hardware.
Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws. For door panels 1" to 1-3/8" thick, weighing up to 30 pounds each. Zinc-plated steel. Spring loaded top pivot and roller guide for easy installation. Permanently lubricated roller guide. Durable pre-painted track. Conforms to ANSI A156.14 type D8622. Includes 1 white steel track, 2 bottom pivots, 2 top pivots, 2 guide wheels, 2 pr. hinges, 2 knobs, pr. aligner, jamb mounting bracket, and offset hole non-mortise hinges. With screws - Boxed. For door panels 1" to 1-3/8" thick, weighing up to 30 pounds each. Zinc-plated steel. Spring loaded top pivot and roller guide for easy installation. Permanently lubricated roller guide. Durable pre-painted track. Conforms to ANSI A156.14 type D8622. Includes 1 white steel track, 2 bottom pivots, 2 top pivots, 2 guide wheels, 2 pr. hinges, 2 knobs, pr. aligner, jamb mounting bracket, and offset hole non-mortise hinges. With screws - Boxed.
For doors 12-18" wide, 1-3/4" thick, weighing up to 30 pounds. 14-16 gauge zinc dichromate plated steel parts. Control arms can be adjusted accommodate non-standard door panel widths. Set includes (1) 1601 control arm, (3) 1605 hinges, (3) - 1703 hinges, (1) 1513 door stop, (.5) 1808 door aligner, and (1) 33 door knob. For doors up to 24" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench. For doors up to 24" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench.
For doors up to 24" x 96" x 1-3/4", weighing 40 pounds. Automatic top of door spacing eliminates gaps. Steel track with positive pivot lock. Surface mounted pivots and guides (no hole drilling). Four way adjustable bottom pivot bracket and shock absorbing hinges. 14-16 gauge zinc dichromate plated steel parts. Includes all hardware to make 2 or 4 door panels fold. Tracks can be cut to fit smaller door/opening widths. Set Content: (1) 1700 track length, (2) 1701 top pivot lock, (2) 1701 top pivot, (2) 1705 door guide, (2) 1713 track stop, (6) 1703 hinges, (2) 1706 bottom pivot, (2) 1711 pivot bracket, (1) 1808 door aligner, (2) 33 door knob, and (1) 1712 wrench.
   
 
1