Home > HARDWARE > WINDOW & DOOR HARDWARE > FOLDING DOORS/HARDWARE > BIFOLD DOOR HARDWARE
Sort By:
1
Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8"H aligners and four No.8 x 3/4" Phillips pan head sheet metal screws. Stamped steel bracket mounts into top or bottom track; fits on "Slimfold" and others. Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16"L x 3/4"W overall.
For use on bi-fold doors; mounts to center of lead panel with provided screw. Can be stained or painted. Includes fasteners. 1-3/4"Dia. Stainable and paintable, for use on hollow core or solid wood bi-fold door panels. 1-3/4"D x 1"H. Includes installation screws. Used by many wardrobe door manufacturers. Solid-nylon guide and pivot. 3/8"OD x 1"H base and 3/8"OD x 5/8"H guide tip.
1-1/4 inch x 2 inch, universal bi-fold door aligner, yellow zinc plated finish. Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16"L x 15/16"D x 1-3/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets.
Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 1/4"OD pin with 5/16"H tip and 5/8"H from base to tip. Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8"L x 7/8"D x 1-5/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets.
For steel frame bi-folding doors. 1/4"OD spring-loaded steel rod with 3/8"OD x 5/16"H white nylon guide cap, 5-5/8"H overall. Replaces bottom pivot/jamb bracket pivot used on tap in type hardware. Used on bi-folding shutter doors. Allows for non-mortise installation. 7/8"W x 1"H each hinge piece, 2"H overall. Includes 2 hinges and 8 flat head installation screws.
Fits Kenna Frame doors and others. 1/4"W nylon wheel with 3/8"OD x 1"H nylon base self-adjusts up to 9/16"H from base. 1/4"W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8" OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2" to 2"H. Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 19/32"OD x 7/16"H nylon cap. Spring-loaded, self-adjusts from 1-7/16"H to 2-1/16"H.
Used by many wardrobe manufacturers. Self-adjusting 5/16"W nylon wheel with 3/8"OD x 1"H nylon base. 2-3/32"H maximum. Fits on Acme doors when opening or closing. Steel springs with nylon retainer. For 1" to 1-3/8" bi-fold doors. 4"L x 3/8"H overall Fits Alliance doors and others. 5/16"H square nylon guide tip with 3/32"W slot (7/16" inside slot), 1/4"OD pin, and 3/8"OD x 1"H nylon base. Self-adjusts to a minimum 1-7/16"H overall.
Fits Acme and Cox doors. Spring-loaded 1/4"OD pin, 7/16"OD x 1-1/2"H steel base, and 3/8"OD x 1/2"H nylon guide cap. For 1" to 1-3/8" thick bi-fold doors up to 50 lbs. each. Includes optional guide cap. Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16"L x 1"D x 1-1/4"H overall. Bottom pivot with 7/16" OD stem, nylon base and steel pin that has a 1/2"OD tip with 3/8"W groove. Includes bracket, bottom pivot and 3 installation screws. Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws.
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16"L x 1"W overall. Includes two No.8 x 1-1/4" Phillips pan head screws. For 1" to 1-3/8" thick bi-fold doors. Top pivot snaps into track socket securing door. Roller guide provides smooth sliding operation of door. 3/8" and 7/16" post diameter. Replacement top guide kit fits: Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll.
For use on hollow core or solid wood bi-fold door panels. 1-3/4"Dia. x 9/16"H. Includes installation screws. Steel base; fits Acme and Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H steel base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Fits Johnson doors and others. Spring-loaded top guide and pivot with 7/16"OD x 1-5/16"H nylon base, and 7/16"OD x 1/4"H nylon cap.
Nylon base; fits Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H nylon base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Fits Johnson doors and others. 7/16"OD x 1-5/16"H nylon base with 1/4"OD steel tip. Adjustable, 2-5/8" max extension. Includes clip, 4 door snugger and door aligner.
Non-mortise plated steel hinge to connect a pair of wood doors that are 1" thick or thicker on their edge without mortising. 1-1/16"W x  3-1/32"L. For 1" to 1-3/8" thick bi-fold doors. Jamb bracket provides support for bottom of folding doors. Bottom pivot fits securely into jamb bracket for smooth operation of doors. Top-mount with concealed spring-loaded pin for easy hanging and operating of doors. Steel 3/8"OD pivot and 1/4"OD pin with 1/4"H tip, 1-3/4"H overall. Includes two 1-1/4" nails.
Self-adjusting 1/4"W nylon wheel with steel 3/8"OD base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails. Self-adjusting 1/4"W nylon wheel with 3/8"OD steel base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails. Repair kit is for 3/8 in. diameter holes. Fits 7/8 in. wide top tracks. Kit includes most parts needed to repair one 2 door set.
Wide base prevents hollow door crush, and large diameter allows for easy gripping. 1-11/16" diameter For use on four panel bi-fold doors. Holds doors in line in closed position. Plastic base; steel track clip; installs into top track to accepts top pivot pin; fits Johnson "new style" Hardware.
Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws.
   
 
1