Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE
Choose a sub category:
BARN DOOR TRACK / BRACKETS BARN DOOR HANGERS BARN DOOR GUIDES
BARN DOOR PULLS / LATCHES
Sort By:
1
Use on shed and barn doors. Rugged steel construction contoured for maximum comfort. Supplied complete with pan head wood screws. Polybagged. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel.
Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed.
Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed. Designed for farm buildings, warehouses, sheds, etc. Heavy gauge steel. Finished look for metal buildings. Four screw carriage bolt holes for excellent holding power. Large size for added hand clearance. 6-3/4"L - Visual Packed. Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs.
Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags. Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, two carriage bolts and two nuts. (1) Bracket should be installed every 2 feet of rail. Suitable for use on corrugated metal siding due to narrow mounting surface. Designed to press into rail to keep rail free of foreign materials from birds or weather . Can be used as center stop using 3/8" x 2" carriage bolts (not furnished). Often packed with box hangers.
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed. Heavy-duty construction provides for long maintenance free operation. Equipped with easily operated locking feature. Can be used in either right hand or left hand applications. Screws included.
Boxed Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7" hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2" or 3-1/2" thick door frames. Boxed. Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8" lag screw mounting. Guide is adjustable for doors up to 5-1/2" thick.
With  bolt, nut and washer. Pack loose. Designed for bi-parting wood sliding doors at least 1-1/2" thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2" or 3-1/2" thick door frames. 15" long hook. Boxed.
Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 Bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300lb. safe working load. Use for 3/4" to 2" in or out-swinging wooden barn doors, sheds, and gates. Rugged steel construction, reversible for right or left hand applications. Padlockable for even greater security and can be operated from either side of the door. 3-1/2" x 4" latch base size. With slots for 5120 flashings. Boxed loose.
Designed to attach #6004 guide rail. Slotted hole in each leg allows for both lateral and vertical adjustments. Bolts, nuts and washers are included for easy attachment. Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
Designed to support a double run of #5114 or #5116 box rail. 1 Bracket should be installed every 2 feet of rail. Includes lag bolt. 300lb. safe working load. Designed for use on wood-frame, metal-clad doors using a 2"x4" or 2"x6" frame with Stanley's 105270, 105676, 105213, and 105726 box rail. Includes two washers, four hex nuts, and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7" adjusted laterally 1" by turning offset bolt for desired clearance. Can hold 450 lbs. per pair. 9" bolt. Boxed. Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6" x 6" post. 1/2" rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed. Without screws. Each loose. Designed for use with box rail on wood-frame or metal clad doors using a 2"x4" or 2"x6" frame. For use with #5100 or #5103 box rail. Packed with two washers, four hex nuts, and two end caps per pair; also contains two #5151 flashing brackets. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6" adjusts laterally 1" by turning offset bolt for desired clearance. Safe Working Load - 225 lb. per hanger. 9" bolt,
Designed for use with round rail on wood-frame, metal-clad doors using a 2"x6" top lateral. 1/2? offset 9" bolt (with 7" thread) adjusts door vertically and laterally (1") from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe Working Load - 300 lb. per hanger. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use with box rail on wood-frame, metal-clad door using a 2"x4" or 2"x6" frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7" adjusts laterally 1" by turning offset bolt for desired clearance. Durable one piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe Working Load - 300 lb. per hanger. 9" bolt.
Designed for use with round rail on wood-frame, metal-clad doors using a 2"x6" top lateral. 1/2? offset 9" bolt (with 7" thread) adjusts door vertically and laterally (1") from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe Working Load - 300 lb. per hanger. Designed for use with box rail on wood-frame or metal clad doors using a 2"x4" or 2"x6" frame. For use with #59 or #5110 box rail. Packed with two washers, four hex nuts, and two end caps per pair; seventeen 3/8" x 2-1/2" lag bolts also are included for mounting rail. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6" adjusts laterally 1" by turning offset bolt for desired clearance. Safe working load - 225 lb. per hanger. 9" bolt. Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
Designed to be used with #5400 round rail to join and hold two double lengths of rail together for bi-passing doors. Includes lag bolt, two carriage bolts and two nuts. Suitable for use on corrugated metal siding due to narrow surface. Adjustable to bring rail closer or further away from building. 300 lb. safe working load. Designed for mounting a double run of Stanley's 105270, 105676, 105213, and 105726 box rail on buildings with corrugated metal siding. Includes lags. Display Packed. Designed to be used with #5400 round rail to mount rail to side of building. Includes lag bolt. (1) Bracket should be installed every 2 feet of rail. Safe working load 300 lbs.
Designed for use with box rail on wood-frame sliding doors from 1-1/2? to 2? thick. For use with #59 or #5110 box rail. Packed with nine 3/8" x 2" lag screws for mounting rail and two end caps. Hangers have vertical and lateral adjustments that can be made from outside building. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2" offset bolt is threaded 5-1/2" with a lateral adjustment of 1" by turning bolt. Safe working load - 225 lb. per hanger. Rigid with 2-51F and 1-51G brackets with lag. Designed for use on wood-frame sliding doors from 1-1/2" to 2" thick. Slot in top of door strap allows lateral and vertical adjustment. 1 pair 5005 box rail hangers, 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Designed for use on doors 1" thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed Loose.
600 pound capacity. Pair flexible with door strap. Boxed. Designed to support a triple run of #5114 or #5116 box rail. Includes two lag bolts. 1 Bracket should be installed every 2 feet of rail. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. 300 lb. safe working load. Adjustable 2-1/2" to 3-1/8". Pack Loose.
Designed to join a triple run of #5114 or #5116 box rail. Includes two lag bolts. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2" bi-passing doors. One splice bracket should be installed on every length of rail to lock it in place. 300 lb. safe working load.
   
 
1