Home > HARDWARE > WINDOW & DOOR HARDWARE > GARAGE DOOR HARDWARE > GARAGE DOOR HARDWARE
Sort By:
1 2
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
For use on most overhead sectional wood and steel garage doors. No. 1 hinge installs between all center garage door joints. Low profile design allows for use in majority of retrofit applications. Hinge barrel accepts 7/16" roller shaft. Each hinge manufactured of 14 gauge steel, with carriage bolts and nuts. Standard duty 7 ball bearing design. For most overhead sectional wood and steel garage doors. Designed for use on 2" track. Factory lubricated to extend operating life. Roller 1-13/16" O.D. Use on most overhead wood and steel garage doors. Rounded contour of handle provides comfortable operation. Heavy steel construction. Includes carriage bolts and nuts. Hot dipped galvanized.
For use on most overhead sectional wood and steel garage doors. Adjustable roller carrier accepts 7/16" roller shaft. Roller carrier made from 14 gauge steel, mounting bracket from 16 gauge steel, with carriage bolts and nuts. 3" pulley is for use on overhead sectional wood and steel one-car garage doors up to 9' wide with extension springs. 18 gauge steel. 4" pulley is for use on overhead sectional wood and steel two-car garage doors up to 18' wide with extension springs, and for use on doors requiring four extension springs. 14 gauge steel. Each can be used as a stationary pulley, or as a spring pulley. Both pulleys feature ball bearing construction and are factory lubricated to extend operating life. With fork, axle bolt and nut. For use on most overhead sectional wood and steel garage doors. Low profile design allows for use in majority of retrofit applications. Hinge barrel accepts 7/16" roller shaft. Each hinge manufactured of 14 gauge steel, with carriage bolts and nuts.
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D. For use on most overhead sectional wood and steel garage doors. Low profile design allows for use in majority of retrofit applications. Hinge barrel accepts 7/16" roller shaft. Each hinge manufactured of 14 gauge steel, with carriage bolts and nuts.
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. For use on overhead sectional wood and steel garage doors equipped with extension springs. Unique two-piece design help provide safe and easy bottom roller replacement. Left hand bracket installs on inside left corner of door, right hand on inside right corner. Roller carrier designed to accept 7/16" roller shaft. Roller carrier made from 14 gauge steel, lift bracket from 13 gauge steel, with carriage bolts and nuts. Hot dipped galvanized finish.
For use on overhead sectional wood and steel garage doors equipped with extension springs. Unique two-piece design help provide safe and easy bottom roller replacement. Left hand bracket installs on inside left corner of door, right hand on inside right corner. Roller carrier designed to accept 7/16" roller shaft. Roller carrier made from 14 gauge steel, lift bracket from 13 gauge steel, with carriage bolts and nuts. Hot dipped galvanized finish. Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Typically used in combination with an exterior Keyed "T" or "L" Lock Handle (1844/1848). Provides for chain or cable operation of side mount snap locks. Replaces most overhead sectional wood and steel garage door swivel lock handles. All metal construction, with fasteners.
Nylon wheel for smooth performance and quiet operation. For 2" track. Roller 1-7/8" O.D. Heavy-duty 10 ball bearing steel rollers extend operating life. Rollers feature a case hardened raceway for added durability. For most overhead sectional wood and steel garage doors. Designed for use on 2" track. Factory lubrication provides for years of care-free operation. Roller 1-13/16" O.D. Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D.
Roller design provides longer operating life than steel ball bearing rollers. Engineered for quite operation of garage door. Can be used on most overhead sectional wood and steel garage doors. Works well in both cold and hot climates. Designed for use on 2" track. Roller 1-25/32" O.D. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. Heavy-duty 10 ball bearing design provides years of care-free operation. Rollers feature a case hardened raceway for added durability. For use on overhead sectional wood and steel garage doors in applications where hinges are installed side by side. Designed for use on 2" track. Factory lubricated to extended operating life. Roller 1-13/16" O.D.
Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. Key cylinder lock is for use with an exterior "T" Latch Handle (1846) and an interior Side Lock (1852). Key cylinder is equipped with a solid brass tumbler and includes two keys. Replaces most overhead sectional wood and steel garage door key cylinder locks. Includes key cylinder ring, escutcheon plate and two break-off machine screws to allow for use on doors on varying thickness. All metal construction. Galvanized carbon steel aircraft cable used on 7'H torsion spring doors.
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. 3" pulley is for use on overhead sectional wood and steel one-car garage doors up to 9' wide with extension springs. 18 gauge steel. 4" pulley is for use on overhead sectional wood and steel two-car garage doors up to 18' wide with extension springs, and for use on doors requiring four extension springs. 14 gauge steel. Each can be used as a stationary pulley, or as a spring pulley. Both pulleys feature ball bearing construction and are factory lubricated to extend operating life. With fork, axle bolt and nut. Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. For use on overhead sectional wood and steel garage doors with extension springs. Installs through length of extension spring and spring loops. Helps prevent personal injury or property damage if extension spring breaks. Constructed of durable 7 x 7 - 1/8" aircraft cable. One end looped and ferruled, the other end fusion cut. Includes cable clamps to help ensure proper cable tie-off.
Interior side lock is designed for use with a Keyed Outside Lock Handle (1850). Can also be used with an outside "T" Latch Handle (1846) and a Key Cylinder Lock (1842). Replaces most overhead sectional wood and steel garage door side locks. All metal construction, with fasteners. Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever. For overhead sectional wood and steel garage doors up to 7' high x 18' wide with extension springs. Also recommended for use on garage doors requiring four extension springs. Attaches between bottom lift bracket and extension spring(s) for up and down operation of garage door. Heavy duty 7 x 7 - 5/32" aircraft cable construction. One end looped and ferruled, the other end fusion cut. With a joiner clip and an "S" hook.
Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts. Used to key lock a variety of interior latching mechanisms. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Includes cylinder lock with trim ring, 2 keys, mounting plate, and 2 screws. For use on most overhead wood and steel garage doors. Mounts and operates on the inside of garage door. Positive locking action provided by heavy steel bolt that engages slot in vertical track. All metal construction, with fasteners.
Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors. Heavy-duty 10 ball bearing steel rollers extend operating life. Rollers feature a case hardened raceway for added durability. Nylon outer wheel provides for quiet operation of garage door. For most overhead sectional wood and steel garage doors. Designed for use on 2" track. Roller 1-13/16" O.D. Hard-drawn wire rods, the only tool used to wind and unwind tension on torsion springs.
For overhead sectional wood and steel garage doors up to 7' high x 16' wide with extension springs. Attaches between bottom lift bracket and extension spring for up and down operation of garage door. Dependable 7 x 7 - 1/8" aircraft cable construction provides years of care-free operation. One end looped and ferruled, the other end fusion cut. Includes joiner clips and "S" hooks to help ensure proper cable tie-off. Used most commonly in combination with an interior Swivel Lock Handle (1856) or locking hub. Solid brass tumbler key cylinder is supplied with two keys. Replaces most overhead sectional wood and steel garage door keyed "T" lock handles. Can also be used on mobile home and RV type doors. All metal construction, with mounting hardware. Inside deadbolt lock is for use on garage doors equipped with locking hubs. Outside key cylinder lock features a solid brass tumbler and is provided with two keys. Replaces most overhead sectional wood and steel garage door deadbolt locks. All mounting hardware including key cylinder ring. Escutcheon plate and fasteners. All metal construction.
5/16" square shaft, 3"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2" hole centers. Includes locking handle and 2 chrome plated solid brass keys. 5/16" square shaft, 2-7/8"L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-3/4" hole centers. Includes locking handle and 2 chrome plated solid brass keys. Zinc diecast construction; keyed lock; 5/16" square shaft, 4-5/8" long, 1-1/2" hole centers; replaces many garage door, camper and R.V. locking handles. Screws attach to lock from the inside of door. Contents: 1 locking handle; 2 keys.
Used by many manufacturers; will replace most locking mechanisms of this type. Painted die-cast inside lock with heavy-duty steel spring bolt. Key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring. Oil tempered steel use on most overhead sectional wood and steel garage doors. Includes a safety cable and cable clamp. Double looped spring ends. Tested for 10,000 open/close cycles. Spring loops are color coded in accordance with NAGDM specifications. Durable black enamel finish. 25" x 70#. Orange, NAGDM color code. 65-75 pounds door weight. Polybagged. For use on sectional, overhead, single car fiberglass doors. Use two 70lb springs for each 70lb door (1 on each side). Rated at 10,000 cycles. Includes safety cable, which protects against personal injury and property damage from broken springs. Color-coded and shrink-wrapped for selection ease. Polybagged.
Oil tempered steel use on most overhead sectional wood and steel garage doors. Includes a safety cable and cable clamp. Double looped spring ends. Tested for 10,000 open/close cycles. Spring loops are color coded in accordance with NAGDM specifications. Durable black enamel finish. 25" x 110#. White, NAGDM color code. 105-115 pounds door weight. Polybagged. Oil tempered steel use on most overhead sectional wood and steel garage doors. Includes a safety cable and cable clamp. Double looped spring ends. Tested for 10,000 open/close cycles. Spring loops are color coded in accordance with NAGDM specifications. Durable black enamel finish. 25" x 120#. Green, NAGDM color code. 115-125 pounds door weight. Polybagged. Allows operation of garage door opener without a transmitter; mount to the exterior door jamb and hard wire to opener. Contents: 1 key cylinder with plastic housing and face plate assembly; 2 keys.
   
 
1 2