Home > HARDWARE > CONSTRUCTION HARDWARE > BUILDING HARDWARE > PIPE FLASHINGS
Sort By:
1
Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary. Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary. Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary.
Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars.
Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars. Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars. Slides over pipe for pitch up to 45 degrees. Non-fading, non-cracking, and non-rusting bases and sealing collars. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Ring on collar tears off, allowing flashings to seal different pipe diameters. Base made of rigid thermoplastic. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars.
Offers a quick, positive repair to leaking flashings. Slides easily over vent stack to act as a protective shield or storm collar. No caulking is necessary. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars.
Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Slides over pipe for pitch to 45 degrees. 100% completely flexible/foldable. Flexible base conforms to most flat or contoured roof surfaces. Non-fading TPR base and collar. No caulking needed. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on rubber bases or rubber collars.
Slides over pipe for pitch to 45 degree. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Rated 180 degrees Fahrenheit continuous heat. Not for hot-mopped or built-up roofs. Do not use petroleum-based products on plastic bases or rubber collars. Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Slides over pipe for pitch up to 40 degrees. Non-fading, non-cracking and non-rusting bases and sealing collars. Ring on collar tears off, allowing flashings to seal different pipe diameters. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Base made of .032 stamped aluminum. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars.
Slides over pipe for pitch up to 40 degrees. Non-fading, non-cracking and non-rusting bases and sealing collars. Ring on collar tears off, allowing flashings to seal different pipe diameters. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Base made of 24 gauge steel. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars. Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Patented one-piece design; sealing collar will not come off. Capable of working on roof pitch from 2/12 (10 degrees) to 20/12 (60 degrees) without stress on collar. Tear-away ring on the collar provides options for sealing different pipe sizes and types. Larger thermoplastic base than normal NO-CAULK flashings. Never needs caulking. Sealing collar rides with pipe as it expands and contracts during temperature fluctuations. Double seal contact between pipe and collar, assuring a leak free seal. Will not rust, corrode, warp, or crack. Lays perfectly flat on the roof. Designed to seal all types of pipe, such as copper, cast iron, plastic, aluminum, and galvanized. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars.
Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Patented one-piece design; sealing collar will not come off. Capable of working on roof pitch from 2/12 (10 degrees) to 20/12 (60 degrees) without stress on collar. Tear-away ring on the collar provides options for sealing different pipe sizes and types. Larger thermoplastic base than normal NO-CAULK flashings. Never needs caulking. Sealing collar rides with pipe as it expands and contracts during temperature fluctuations. Double seal contact between pipe and collar, assuring a leak free seal. Will not rust, corrode, warp, or crack. Lays perfectly flat on the roof. Designed to seal all types of pipe, such as copper, cast iron, plastic, aluminum, and galvanized. Not for hot-mopped or built-up roofs. Do not use petroleum based products on plastic bases or rubber collars. Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof .032 stamped aluminum standard base. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.
Slides over pipe and conforms to any roof pitch. Use silicone sealant between base and surface, and secure with sheet screws. Multi-size pipe sealing range. Molds to metal, plastic, etc. Non-fading EDPM collar. Rated 212 degrees Fahrenheit continuous heat. Resists weathering due to ozone and ultraviolet light. Approved for Type B installations. Not for hot-mopped or built-up roofs. Do not use paint or petroleum based products on collar. A gasket-less two piece pipe boot repair system designed to repair the leak around the vent pipes that penetrate the roof; slides over the existing roof vent boot, preventing future leaks; easy installation and no tools required; designed for all standard roof pitches (3/12 to 12/12). Black. A gasket-less two piece pipe boot repair system designed to repair the leak around the vent pipes that penetrate the roof; slides over the existing roof vent boot, preventing future leaks; easy installation and no tools required; designed for all standard roof pitches (3/12 to 12/12). Black.
A gasket-less two piece pipe boot repair system designed to repair the leak around the vent pipes that penetrate the roof; slides over the existing roof vent boot, preventing future leaks; easy installation and no tools required; designed for all standard roof pitches (3/12 to 12/12). Black. Slides over pipe and conforms to any roof pitch. Use silicone sealant between base and surface, and secure with sheet screws. Multi-size pipe sealing range. Molds to metal, plastic, etc. Non-fading EDPM collar. Rated 212 degrees Fahrenheit continuous heat. Resists weathering due to ozone and ultraviolet light. Approved for Type B installations. Not for hot-mopped or built-up roofs. Do not use paint or petroleum based products on collar. Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.
Split collar design easily installs on pipe with limited over the top access.  Easily customized to accommodate a broad range of pipe diameters. Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.
Slides over pipe for pitch to 40 degrees. Non-fading sealing collar. Rated 180 degrees Fahrenheit continuous heat. Approved for Type B installations. Rustproof, stamped galvanized, 24 gauge. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars. Recommended for all commercial installations. Recommended for all commercial installations.
Recommended for all commercial installations. Recommended for all commercial installations.
   
 
1