Home > HARDWARE > CONSTRUCTION HARDWARE > BUILDING HARDWARE > ROOFING
Sort By:
1
Provides a protective waterproof base beneath the first course of shingles. Zip strip seals down shingle tabs to protect from wind up-lift. Also use for roof flashing and gutter repairs. 50 mil (1.3 mm) thickness. Waterproofing underlayment. Composed of a high tack rubberized asphalt, coated on a non-woven glass fiber mat. Lower surface has a split-release silicone release backing for ease of application. Specifically designed to provide secondary waterproofing protection to shingles as well as prevent ice damage and wind driven rain. Meets ASTM D1970-08 standard and is ICC listed. Self-sealing when penetrated by mechanical fasteners or roofing nails. Fully adhered system prevents lateral moisture migration. Sand surfaced for slip-resistance. UL Classified. Class A fire classification under fiber-glass shingles and Class C under organic felt shingles (per ASTM E108/UL 790). 1.3 mm thickness. Waterproofing underlayment. Composed of a high tack rubberized asphalt, coated on a non-woven glass fiber mat. Lower surface has a split-release silicone release backing for ease of application. Specifically designed to provide secondary waterproofing protection to shingles as well as prevent ice damage and wind driven rain. Meets ASTM D1970-08 standard and is ICC listed. Self-sealing when penetrated by mechanical fasteners or roofing nails. Fully adhered system prevents lateral moisture migration. Sand surfaced for slip-resistance. UL Classified. Class A fire classification under fiber-glass shingles and Class C under organic felt shingles (per ASTM E108/UL 790). 1.3 mm thickness.
A replacement for 15 lb oil saturated felt; it is designed for use under asphalt shingles only; 25 times stronger than 15 lb felt; meets and exceeds ASTM D226 and D4869; 6 square more per roll compared to 15 lb felt; ease of installation - wider, lighter and more coverage per lap; synthetic construction is impervious to mold; lays flat and does not absorb water and wrinkle; enhanced UV protection; no oil leaching, no hazardous material content; fiber grip slip-resistant walking surface; advanced backside non-slip coating; low temperature flexibility. Roll size: 10 sq. or 93m?. Smooth, film surface link barrier with special adhesive for one-time repositioning, but aggressively adheres over time. Unique film surface pattern improves footing even in hot weather. Self seals around nails or metal roofing fasteners. Split back release film peels off in layers for faster installation and greater homeowner value. Fiberglass reinforcement helps resist wrinkling and buckling. Lays flatter under shingles. Design to withstand high metal roof temperatures and will not melt or flow. High temperature compound is suitable for most metal roof applications. For application under copper and zinc. Passes low temperature flexibility (-20 degrees) and waterproof integrity after low temperature flexibility requirements. Can be exposed for up to 60 days if necessary. Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap. Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap. Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
ROOFING UNDERLAYMENT P-S
Our Price: $104.66
30 lb felt replacement used for steep slope roofing under all metal, shake and shingle roofing; 8 times lighter and 20 times stronger than #30 felt; Class A Fire ASTM E108, meets and exceeds ASTM D226; meets Class 4 hail rating; synthetic construction inert to mold growth; "Sure-Grip" ridged walking surface plus the Diamond-plate slip resistant coating technology contributes to "LEED" points, certified minimum of 20% reclaimed content (100% recyclable); all temperature performance -40 degree F to 240 degree F (-40 degree C to 115 degree C); 6 month UV exposure; cool light gray surface doesn't expand or contract; dual logo custom printing available; 30 year limited warranty. Roll size: 10 sq. or 93m?. A premium Ice Damming and Leak protection used for steep slope roofing under all metal, tile, slate, shake and shingle roofing; the only modified rubberized asphalt Peel & Stick with a tough and rugged patented "Sure-Foot" nodular walking surface; watertight asphalt to asphalt lap system; an approved Polyfoam underlayment for use with "Polyset" foam systems; Class A Fire ASTM E108; meets and exceeds ASTM D226; all temperature performance -40 degree F to 240 degree F (-40 degree C to 115 degree C); Installation temperature 40 degree F (5 degree C) and above; synthetic construction inert to mold growth; cool light gray surface doesn't expand or contract; up to 6 months UV exposure; 30 year limited warranty. Roll size: 2 sq. or 20m?. 30 lb felt replacement used for steep slope roofing under all metal, tile, slate, shake and shingle roofing; 6 times lighter and 20 times stronger than #30 felt; Class A Fire ASTM E108, meets and exceeds ASTM D226; meets Class 4 hail rating; synthetic construction inert to mold growth; "Sure-Foot" slip resistant nodular walking surface and an advanced resin technology provide superior steep slope walk-ability; contributes to "LEED" points, certified minimum of 20% reclaimed content (100% Recyclable); all temperature performance -40 degree F to 240 degree F (-40 degree C to 115 degree C); 6 month UV exposure; cool light gray surface doesn't expand or contract; dual logo custom printing available; 40 year limited warranty. Roll size: 10 sq. or 93m?.
   
 
1