Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM
Choose a sub category:
TREATED WOOD TRIM DECKING TRIM-METAL WOOD MOLDINGS
WOOD MOLDING TRIM PIECES PVC MOLDINGS MOUNTING BLOCKS
CORNER PROTECTORS CABINET MOLDING / TRIM EDGE BANDING
HIDE-AWAY IRONING BOARDS WOOD LAMINATE DIMENSIONAL LUMBER
PLASTIC PANELS & ACCESSORIES BACKSPLASH PANELS & TRIM
Sort By:
1 2 3 4
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Appearance grade, southern yellow pine. MCA treatment, above ground contact. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
EDGE TRIMMER BLADE 5PK
Our Price: $1.44
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Single bevel cutting blades used in the "BAND-IT" edge trimmer. Cuts and trims flush, clean, and in both directions. .015" x .75" x 1.75". Carded.
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
POST TOP 5-1/2IN ACORN
Our Price: $2.44
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Appearance grade, white pine. MCA treatment, above ground contact.
Appearance grade, white pine. MCA treatment, above ground contact. Appearance grade, white pine. MCA treatment, above ground contact.  Accommodates 4" x 4" post. Appearance grade, white pine. MCA treatment, above ground contact.
Appearance grade, white pine. MCA treatment, above ground contact. Appearance grade, white pine. MCA treatment, above ground contact. No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Appearance grade, white pine. MCA treatment, above ground contact.
Pine treated with Osomose Weather Shield (inhibits checking and cracking).
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Used under Suntuf panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Selected for appearance, Grade, southern yellow pine MCA treatment, above ground contact.
Pine treated with Osomose Weather Shield (inhibits checking and cracking). No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture grade, pre-sanded and ready to finish as desired with preheated (400 degree) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and reapply. Allow edging to cool completely before finishing other pieces.
Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture grade, pre-sanded and ready to finish as desired with preheated (400 degree) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and reapply. Allow edging to cool completely before finishing other pieces. Sanded on 4 sides. Woodtite 1" screw (sku 940.4302) with EPDM washer is used to valley fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2" screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Applies to wood, plywood particle board, hardboard, metal, and more. Prefinished and colorfast; heat and stain resistant; washable and static free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2" longer than surface to be covered with preheat (400 degree) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded. Surface mount for light fixture; decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; fits all type of siding; outside dimension: 6-7/10" x 6-7/10"; Limited Lifetime warranty. Made in USA. Comes with stainless steel screws and will install ten classic balusters. Allows classic balusters to be secured to the rail without drilling. Can be used on both wood and composite railings. ACQ and CA compliant.
Pre-drilled to ensure accurate attachment of the railing to the post. Connectors can be used on both railing and composite materials. Includes stainless steel screws. Use for attaching actual 1-1/2" x 3-1/2" rails. Used to create inside corner return for you Fascade backsplash project. 7" x 18". Used to provide a professionally finished edge for your backsplash project. 18" length.
Used to provide a professionally finished edge for your Fascade backsplash project. 6" x 18". Used to create inside corner return for you Fascade backsplash project. 7" x 18". Used under Suntuf panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
Used to create inside corner return for you Fascade backsplash project. 7" x 18". Used to provide a professionally finished edge for your Fascade backsplash project. 6" x 18". Used to provide a professionally finished edge for your Fascade backsplash project. 6" x 18".
Used to create inside corner return for you Fascade backsplash project. 7" x 18". Used to provide a professionally finished edge for your Fascade backsplash project. 6" x 18". Used to create inside corner return for you Fascade backsplash project. 7" x 18".
Used to provide a professionally finished edge for your Fascade backsplash project. 6" x 18". Used to create inside corner return for you Fascade backsplash project. 7" x 18". Designed to work with stair angles between 30 to 35 degrees and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant.
Designed to work with stair angles between 30 to 35 degrees and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant. Used for installing short wire connections and hose bibs; decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; inner dimensions: 3" x 4-3/4"; outer dimensions: 4-1/2" x 6-5/16"; Limited  Lifetime warranty. Made in USA. Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer.
Decoratively provides a level and waterproof surface for all exterior fixtures; durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade; the patented snap-on trim ring makes installation easy; inner dimensions: 5" x 6"; outer dimensions: 7" x 8"; Limited Lifetime warranty. Made in USA. Protects post from nature's elements. Cedar. Has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". Use on desktop, antique, shelving cabinets, crafts, hobbies, etc. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture grade, pre-sanded and ready to finish as desired with preheated (400 degree) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and reapply. Allow edging to cool completely before finishing other pieces.
   
 
1 2 3 4