Home > PAINT & SUNDRIES > SUNDRIES > ROOF & DRIVEWAY > ROOF REPAIR ACCESSORIES
Sort By:
1
Fiberglass mesh. For use with waterproofing compounds for basement foundation cracks. Use on asphalt shingles, metal roofs, barns, outbuildings, flat roofs, campers and RV's. Use with any roof cement. Designed to reinforce many Henry roofing products. Woven mesh fabric made of yarns of inert, flexible filaments of pure glass. Yellow resin coating on the fabric minimizes distortion, and is compatible with asphalt and coal tar cements and coatings, emulsions, solvent-based, and hot-melt types. Use for roof repairs, for flashings, and sealing seams in metal and composition roofs. Also use in below-grade waterproofing applications, tank-lining systems, and for waterproofing planter boxes. Has tensile strength of 75lb./in. Acid and heat resistant, and will not rot or decay. Complies with ASTM D-1668-86, Type III. Permanent leak repair that bonds to any clean, dry surface. Seals cracked or rusted flashings, vent pipes, rain gutters and downspouts. Stop leaks between shingles, roof seams and laps, soffits, parapt walls. Use to seal around chimneys and skylights.
Contours snugly over and around protrusions. Use on vents, seams, laps, cracks, flashing, standing water situations or where two unlike surfaces meet. For use over rough surfaces, uneven surfaces, or where final appearance is not a concern. Coverage 17 sq ft. Designed to reinforce many Henry roofing products. Woven mesh fabric made of yarns of inert, flexible filaments of pure glass. Yellow resin coating on the fabric minimizes distortion, and is compatible with asphalt and coal tar cements and coatings, emulsions, solvent-based, and hot-melt types. Use for roof repairs, for flashings, and sealing seams in metal and composition roofs. Also use in below-grade waterproofing applications, tank-lining systems, and for waterproofing planter boxes. Has tensile strength of 75lb./in. Acid and heat resistant, and will not rot or decay. Complies with ASTM D-1668-86, Type III. Use for roof repairs, flashings, and for sealing seams in metal and composition roofs. Woven mesh fabric made of yarns of inert, flexible filaments of pure glass saturated with asphalt. Also use in below-grade waterproofing applications, tank-lining systems, and for waterproofing planter boxes. Has tensile strength of 75lb./in. Acid and heat resistant, and will not rot or decay. Complies with ASTM D-1668, Type I.
Fiberglass mesh. For use with waterproofing compounds for basement foundation cracks. Use on asphalt shingles, metal roofs, barns, outbuildings, flat roofs, campers and RV's. Use with any roof cement. Heat set, lightweight, 100-percent spun bonded polyester, non-woven mat for use with #289 ElastoCaulk and other Henry asphaltic mastics and coatings. Has a high degree of fabric impregnability, tensile strength, expansion behavior, puncture resistance, tongue tear strength, and tear strength. Will not decay. Convenient 4" width size pieces for small repairs. Good for repairs to both new and old construction in roofing and waterproofing applications. Complies with ASTM D-1688-80, Type III. Designed to reinforce HE204, HE209, HE208, HE505 AND HE906 and coatings when used in roof repair work, for flashings, and for sealing seams in metal and composition roofs. Also use in below-grade waterproofing application, tank lining systems, and for waterproofing planter.
Use to provide reinforcement over areas prone to splitting, such as seams or joints, and create a "bridge" that ties the surfaces together so water cannot seep through. Use around roof vents, on flashings, over cracks and gaps, along the seams on metal or RV roofs, and in many other applications. Must be top coated.
   
 
1