Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES
Choose a sub category:
EXIT / EMERGENCY LIGHTS CHANDELIERS LIGHTING - PENDANT
LIGHTING - WALL MOUNT LIGHTING - CEILING LIGHTING - BATHROOM
LIGHTING - CLOSET LIGHTING - PORCH PORCH - MOTION CONTROLLED
LIGHTING - OUTSIDE POST LIGHTING FLOOD / SECURITY LIGHTING
DUSK TO DAWN AREA LIGHTING LIGHTING - RECESSED LIGHTING - TRACK
LIGHTING - UTILITY LIGHTING - CABINET & SPECIALTY PHOTO CONTROLS AND ACCESSORIES
LAMPS LED CEILING FIXTURES
Sort By:
1 2 3 ... 8
Molded of high-temperature, thermoset plastic. Mounts on 4" outlet boxes with breakout for 3.25"  box mounting. 4 top wire screws. Terminal screws backed out. Meets all UL 496 requirements. 250 volt, 660 watts. Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts. Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed.
Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts. Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish. Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts. Easy to install. Takes one medium base bulb, sold separately. 8" diameter open trim for use with 6" Non-IC housings. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, sold separately. cULus Listed.
Easy to install. Takes one medium base bulb, sold separately. 8" diameter open trim for use with 6" Non-IC housings. Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, sold separately. cULus Listed.
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, sold separately. cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, sold separately. cULus Listed. Molded of high-temperature, thermoset plastic. Mounts on 4" (101.6mm) outlet box with knockouts for 3.25" (82.5mm) box mounting.  Comes with 6" pigtail leads that are 221 degrees F (105 degrees C) insulated standard number 18 AWG wire, stripped 0.75" (19.0mm). 660 watts, 250 volts AC. ROHS compliant. File E7182, cULus, Evaluated to UL496.
With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts. Meets all UL 496 requirements. Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Leads are 6" 105 degree Celsius insulated stranded #16, stripped 3/4". Pull chain, includes ball chain, 3' of cord, connector and end bell. Terminal screws backed out, ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Two piece version with 15 amp 125 volt, 250 watts AC 2P3W outlet, plastic. Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed.
Easy to install. Takes one medium base bulb, sold separately. 8" diameter open trim for use with 6" Non-IC housings. Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. Uses one medium base bulb, 60 watt maximum, (sold separately). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed.
For joining two sections end-to-end. Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (sold separately). cULus Listed. Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (sold separately). cULus Listed.
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Clear glass shade. Uses one clear medium base E26 bulb, 60 watt maximum, (sold separately) 6" height x 4-3/4" width. cULus Listed. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
Clear glass shade. Uses one clear medium base E26 bulb, 60 watt maximum, (sold separately) 6" height x 4-3/4" width. cULus Listed. Clear glass shade. Uses one clear medium base E26 bulb, 60 watt maximum, (sold separately) 6" height x 4-3/4" width. cULus Listed. Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. 500 watt.
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 5/8" diameter. Maximum load tungsten: 15A, 1800 watts. Maximum load ballasted: 1100 VA, 9.1A. 2.95" x 2" x 1.7". Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved.
Residential grade electrical component. Clear polycarbonate housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. UL and CSA listed, ANSI C136.10 compliant. High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included.  Polybagged. UL Listed. For mercury vapor and sodium bulbs. Bi-metal switch with 3-prong twist lock plug. Plastic housing. Maximum load tungsten 8.3A, 1000 watts. Maximum load ballasted: 1800 VA, 15.0A. Outdoor, wire-in connection. 2.55" x 3.65" x 3.65".
For 4" recess light. E27 socket. Use R20/PAR20 Maximum 50 watt bulb,( not included). Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 300 watts, direct-wire. UL and CSA Listed. Outdoor dusk to dawn floodlight light control for Halogen/CFL/LED bulbs. Long stem design fits inside most flood lights, spot lights or enclosed exterior fixtures. Turns compact fluorescent, LED, halogen and incandescent bulbs on at dusk, off at dawn. 150 watts maximum. Plastic housing, 4.3" x 3.35" x 3.35".
Diameter of 7", white trim with reflector for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, R-30, 75 watt maximum. Bulb sold separately. For 4" recess light. E27 socket. Use R20/PAR20 Maximum 50 watt bulb,( not included). Automatic switch turns light on when door opens, shuts off when door closes. Hinged and sliding doors. Ivory color.  SPT-1 cord with plug.
Clear floral glass shade. 5-3/8" diameter x 7" height. Uses one clear medium base bulb, 60 watt maximum. (Sold separately). cULus Listed. For pole barns. Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum (sold separately). cULus Listed.
150W SCREWIN PHOTO CTRL
Our Price: $5.55
Electrical components polycarbonate. Compact screw-in control for up to 150 watt incandescent, CFL, LED and halogen lamps. Electrical components and ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts, direct-wire. UL and CSA Listed. Clear ribbed glass shade. 5-7/8" diameter x 7-1/4" height. Uses one clear, medium base bulb, 60 watt maximum (sold separately). cULus Listed.
For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 1/2" diameter neck and hardware, 3-wire. Plastic housing. 15 amp, 1800 watts maximum load tungsten. 1100 VA, 9.1 amp maximum load ballasted. Wire-in connection. 4.25" x 2.1" x 2.1". UL Listed. Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum (sold separately). cULus Listed. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included).
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum (sold separately). cULus Listed. Hardwired photocell control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, bi-metal switch and hardware for 1/2" pipe; 3-wire. Maximum load tungsten: 16.6A, 2000 watts. Maximum load ballasted: 1900 VA, 15.8A. 4.5" x 2.8" x 2.35". Electrical components. Noryl housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. 240 volt with a range of 185 - 305 volts. UL and CSA listed, ANSI C136.10 compliant.
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum (sold separately). cULus Listed. Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved. Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum (sold separately). cULus Listed.
Easy to install. Takes medium base bulb, R-30, 75 watt maximum, sold separately. 8" diameter eyeball trim for use with 6" Non-IC/IC housings. With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only. Eight inch diameter drop lens trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum. Bulb sold separately.
   
 
1 2 3 ... 8