Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > FLOOD / SECURITY LIGHTING
Sort By:
1
Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed. High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included.  Polybagged. UL Listed. Corrosion-resistant die-cast aluminum construction for long life. Preassembled and prewired for easy installation. Use for ground, eave or wall mount lighting. Uses T-3 double-end, 120/130 volt halogen bulb, included.
Corrosion-resistant die-cast aluminum construction for long life. Preassembled and prewired for easy installation. Use for ground, eave or wall mount lighting. Uses T-3 double-end, 120/130 volt halogen bulb, included. Locking swivel knuckle for positive lamp positioning and pin-point directional aiming. Die cast construction, powder coat finish. For 75-150 watt maximum, Par-38 type lamps, (not included). 15 amp/125 volt, 3 wire cord set included. Does not include mounting plate. Gray color. cULus Listed. Shrink wrapped. Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL listed for use in wet locations.
Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL listed for use in wet locations. Corrosion-resistant die-cast aluminum construction for long life. Preassembled and prewired for easy installation. Use for ground, eave or wall mount lighting. Uses T-3 double-end, 120/130 volt halogen bulb, included. Die cast aluminum housing has deep ribbed fins to dissipate heat quickly. Built-in aiming adjustment allows tailoring light to specific requirements. Tempered glass lens is thermal shock and impact resistant for increased lamp protection. Lens enclosing captive bezel is secured by a single captive screw.
Die cast aluminum housing has deep ribbed fins to dissipate heat quickly. Built-in aiming adjustment allows tailoring light to specific requirements. Tempered glass lens is thermal shock and impact resistant for increased lamp protection. Lens enclosing captive bezel is secured by a single captive screw. Replacement motion sensor for security lights, requires 120-volts AC, 60 Hz. Test, auto and manual operating modes. For manual mode, the control must be wired through a switch. Turns on lighting when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Photocell keeps the lighting off during daylight hours. LED indicates motion was sensed (day or night). Resets to auto mode at dawn. Adjustable range up to 70 ft., varies with surrounding temperature. Sensing angle up to 180 degrees. Electrical load up to 500 watt maximum incandescent. Replacement motion sensor for security lights, requires 120-volts AC, 60 Hz. Test, auto and manual operating modes. For manual mode, the control must be wired through a switch. Turns on lighting when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Photocell keeps the lighting off during daylight hours. LED indicates motion was sensed (day or night). Resets to auto mode at dawn. Adjustable range up to 70 ft., varies with surrounding temperature. Sensing angle up to 180 degrees. Electrical load up to 500 watt maximum incandescent.
Includes two die-cast zinc lampholders, with round zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For wet locations. Use Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed. Rectangular light kit. Includes 2 die-cast aluminum lampholders with rectangular zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For use in wet, damp, or dry locations. Uses 2 Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed. Rectangular light kit. Includes 2 die-cast aluminum lampholders with rectangular zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For use in wet, damp, or dry locations. Uses 2 Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed.
Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. UL Listed. Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. UL Listed. Outdoor motion activated light control with selectable off times. Turns on when motion is detected, off at user programmed time, 1 / 2 / 5 / 10 or 20 minutes. Fixed position switch retains setting in the event of a power outage. 180 degree sensing window, 30' detection zone. Ball joint for full adjustability, up/down/left/right. Spring loaded contact for full 360 degree rotation. Compatible with compact fluorescent, LED, halogen and incandescent floodlights.
Corrosion-resistant die-cast aluminum construction for long life. Twin halogen floodlights increase coverage area. Use for eave or wall mount lighting. 300 watts (150 watt twin). Corrosion-resistant die-cast aluminum construction for long life. Twin halogen floodlights increase coverage area. Use for eave or wall mount lighting. 300 watts (150 watt twin). Replacement motion sensor for security lights, requires 120 volt AC, 60 Hz. Pulse Count technology reduces false sensing from wind and rain. 2 level lighting, low-level accent light adjustable timer settings include off, 3 hour, 6 hour, and dusk to dawn, and full bright when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Automatic photocell deactivates unit in daylight to save energy. Manual override turns light on or off when wired with a wall switch. Allows light to stay on continuously all night when needed.  Range can be adjusted from 15' up to 100', varies with surrounding temperature. Sensing angle of 240 degrees.
Replacement motion sensor for security lights, requires 120 volt AC, 60 Hz. Pulse Count technology reduces false sensing from wind and rain. 2 level lighting, low-level accent light adjustable timer settings include off, 3 hour, 6 hour, and dusk to dawn, and full bright when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Automatic photocell deactivates unit in daylight to save energy. Manual override turns light on or off when wired with a wall switch. Allows light to stay on continuously all night when needed.  Range can be adjusted from 15' up to 100', varies with surrounding temperature. Sensing angle of 240 degrees. Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75-150 watt maximum, not included. UL Listed.
Wall or eve mounted, must be mounted horizontally. Adjustable sensitivity. Selectable light timer, test, 1 minute, 5 minutes or 10 minutes. 110 degree sensing angle. Manual override turns light off or on with existing indoor wall switch. Allows light to stay on continuously all night when needed. Up to 60' range. Uses one 150 watt quartz bulb, included. Wall or eve mounted, must be mounted horizontally. Adjustable sensitivity. Selectable light timer, test, 1 minute, 5 minutes or 10 minutes. 110 degree sensing angle. Manual override turns light off or on with existing indoor wall switch. Allows light to stay on continuously all night when needed. Up to 60' range. Uses one 150 watt quartz bulb, included. Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. UL Listed.
500W BRNZ HLGN FLOOD/HOOD
Our Price: $21.44
Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. UL Listed. Dusk-to-dawn operation. Up to 3,000 square foot light coverage. Uses 1 bipin CFL, 13 watt bulb, included. Up to 10,000 hour bulb life. Operating temperature: -13 to 120 degrees F. Wires are AWG number 18. UL Recognized. Corrosion-resistant die-cast aluminum construction for long life. Preassembled and prewired for easy installation. Use for ground, eave or wall mount lighting. Uses T-3 double-end, 120/130 volt halogen bulb, included.
Portable plug-in motion light. 100 watt halogen floodlight, bulb included. 8' electrical cord. Die-Cast metal fixture with plastic handle and motion sensor detects motion 180 degrees and up to 60' range. Indoor/outdoor use. UL and CUL Listed for wet locations. Wall mount only. Senses heat images from objects such as people, large animals and automobile engines. When motion is detected the light will automatically turn on. Once motion has stopped the light will turn off after a preselected time delay. May also be used as a standard floodlight. For use only on GFCI protected circuits. For maximum bulb life, position fixture so the quartz halogen bulb remains within 4 degrees of horizontal. Motion sensor turns on light when motion is detected, automatically turns light off after time delay of 1 , 5 or 10 minutes. Adjustable sensitivity. Built-in photocell keeps the light off during daylight hours. Test, auto and manual operating modes. Manual override turns light off or on at indoor wall switch, allows light to stay on continuously all night when needed. Coverage area up to 1,000 square feet, up to 30' range, varies with surrounding temperature. Sensing angle up to 110 degrees. Controls 60 watts maximum of incandescent light. 120 volt AC, 60 Hz. Includes mounting hardware. Non-metallic/white finish. 5 super bright white LED. 100 lumens.
Daylight shut-off. Selectable walk test. Automatic power outage reset. Sensitivity adjustment. Patented swivel adjustment. Selectable light timer 1, 5 or 10 minutes. Manual override. Operating temperature-minus 22 degrees Fahrenheit to plus 120 degrees Fahrenheit. Instant on operation. Durable metal fixture. Tempered glass. Wall or eave mountable. Clip-on lens. 150 degrees wide angle lens. 70' sensor range. 250 watt quartz halogen bulb included. 6,400 square foot sensor coverage. Powder coat finish. Unique dimpled design reflector and custom lens design. Daylight shut-off. Selectable walk test. Automatic power outage reset. Sensitivity adjustment. Patented swivel adjustment. Selectable light timer 1, 5 or 10 minutes. Manual override. Operating temperature-minus 22 degrees Fahrenheit to plus 120 degrees Fahrenheit. Instant on operation. Durable metal fixture. Tempered glass. Wall or eave mountable. Clip-on lens. 150 degrees wide angle lens. 70' sensor range. 250 watt quartz halogen bulb included. 6,400 square foot sensor coverage. Powder coat finish. Unique dimpled design reflector and custom lens design. Daylight shut-off. Selectable walk test. 300 watts of incandescent lighting. Automatic power outage reset. Sensitivity adjustment. Wall or eave mountable. Patented swivel adjustment. Selectable light timer 1, 5 or 20 minutes. Manual override. Operating temperature-minus 22 degrees to plus 120 degrees Fahrenheit. Pulse count technology. Range boost doubles coverage area up to 13,000 square feet. Selectable range of 70' or 100'. Maximum coverage angle of 240 degrees. Durable metal fixture. 2-level lighting. Off, 3 hour, 6 hour or dusk to dawn selectable timer. Protective metal lamp covers.
Daylight shut-off. Selectable walk test. 300 watts of incandescent lighting. Automatic power outage reset. Sensitivity adjustment. Wall or eave mountable. Patented swivel adjustment. Selectable light timer 1, 5 or 20 minutes. Manual override. Operating temperature-minus 22 degrees to plus 120 degrees Fahrenheit. Pulse count technology. Range boost doubles coverage area up to 13,000 square feet. Selectable range of 70' or 100'. Maximum coverage angle of 240 degrees. Durable metal fixture. 2-level lighting. Off, 3 hour, 6 hour or dusk to dawn selectable timer. Protective metal lamp covers. Solar power allows light to be placed in areas that do not have traditional wired access. Never change a bulb with LED technology. 15' solar panel power cord allows flexibility in solar panel placement. Easy installation and no wiring required. 110 degree motion activated. 33' minimum field of vision. Light output of 80 lumens. On time after motion is detected is adjustable from 10 seconds to 1 minute. Light operates at night only. The main unit contains the 2x0.57 LEDs, motion sensor, and batteries (3xNiMH rechargeable batteries, 1.2v 300mAH). Wall mount only. Twin 150 watt quartz lights, heavy duty die cast metal shell. 2 level lighting, low-level accent light with adjustable timer, settings include off, 3 hour, 6 hour, and dusk to dawn, and full bright when motion is detected, for selected time of 1, 5, or 10 minutes. Automatically returns to dim mode after selected time. Automatic photocell deactivates unit in daylight to save energy. Pulse count technology reduces false sensing from wind and rain. Manual override turns light off or on with existing indoor wall switch. Allows light to stay on continuously all night when needed. Up to 70' range varies with surrounding temperature. Uses two 150 watt quartz bulbs, 300 watts maximum. Includes mounting hardware.
Twin 150 watt quartz lights, heavy duty die cast metal shell. 2 level lighting, low-level accent light with adjustable timer, settings include off, 3 hour, 6 hour, and dusk to dawn, and full bright when motion is detected, for selected time of 1, 5, or 10 minutes. Automatically returns to dim mode after selected time. Automatic photocell deactivates unit in daylight to save energy. Pulse count technology reduces false sensing from wind and rain. Manual override turns light off or on with existing indoor wall switch. Allows light to stay on continuously all night when needed. Up to 70' range varies with surrounding temperature. Uses two 150 watt quartz bulbs, 300 watts maximum. Includes mounting hardware. Twin 100 watt quartz halogen lights, heavy duty die cast metal shell. 2 level lighting, low-level accent light with adjustable timer, settings include off, 3 hour, 6 hour, and dusk to dawn, and full bright when motion is detected, for selected time of 1, 5, or 10 minutes. Automatically returns to dim mode after selected time. Automatic photocell deactivates unit in daylight to save energy. Pulse count technology reduces false sensing from wind and rain. Manual override turns light off or on with existing indoor wall switch. Allows light to stay on continuously all night when needed. Range up to 100' with Range Boost, 70' with Range Boost off, varies with surrounding temperature. Sensing angle up to 240 degrees. Uses two T4 100 watt, G8 halogen bi-pin bulbs, 200 watts maximum, 120 volts AC, 60 Hz. Includes bulbs and mounting hardware. Twin 100 watt quartz halogen lights, heavy duty die cast metal shell. 2 level lighting, low-level accent light with adjustable timer, settings include off, 3 hour, 6 hour, and dusk to dawn, and full bright when motion is detected, for selected time of 1, 5, or 10 minutes. Automatically returns to dim mode after selected time. Automatic photocell deactivates unit in daylight to save energy. Pulse count technology reduces false sensing from wind and rain. Manual override turns light off or on with existing indoor wall switch. Allows light to stay on continuously all night when needed. Range up to 100' with Range Boost, 70' with Range Boost off, varies with surrounding temperature. Sensing angle up to 240 degrees. Uses two T4 100 watt, G8 halogen bi-pin bulbs, 200 watts maximum, 120 volts AC, 60 Hz. Includes bulbs and mounting hardware.
SOLAR LED MOTION LIGHT
Our Price: $33.43
Manual off or on with existing indoor wall switch. 300 watts, dual Brite, 2 level lighting. Timer settings include off, 3 hour, 6 hour or dusk to dawn, with daylight shutoff. Timer allows adjustment of the time lights stay on after motion has stopped. Pulse count technology reduces false sensing from wind and rain. Hidden 240 degree motion sensor can be adjusted from 15 to 100 feet. Durable weather resistant plastic construction. Built in solar panel, fixture is motion activated at night. No wiring necessary, mounts almost anywhere. Equipped with a photocell, turns on only at night. Up to 23' range in a 100 degree arc. Includes light fixture, mounting plate, (2) fixture mounting screws, (2) plastic plugs, (2) keys, (1) key chain and (3) AA Ni-MH rechargeable batteries (installed). Allow solar panel to receive four full days of sunlight with the switch in the off position before turning fixture on, or to auto mode to give the batteries a full charge. Quartz light, 100 watt, heavy duty die cast metal shell. 2 level lighting, low-level accent light with  settings of normal and dusk to dawn, and full bright when motion is detected, for selected time of 1, 5, or 20 minutes from last motion sensed. Automatically returns to dim mode after selected time. Automatic photocell deactivates unit in daylight to save energy. Pulse count technology reduces false sensing from wind and rain. Manual override turns light off or on with existing indoor wall switch. Allows light to stay on continuously all night when needed. Up to 30' range varies with surrounding temperature. Up to 190 degree sensing angle. Overlapping outward and downward detection zones secure covered area. Uses one up to 100 watt maximum halogen, 78 mm T-type bulb. 120 volts AC, 60 Hz. Includes mounting hardware.
Solar power allows light to be placed in areas that do not have traditional wired access. Never change a bulb with LED technology. 110 degree motion activated. 30' minimum field of vision. Light output of 480 lumens. Light operates automatically at night only. Li-ion rechargeable battery. Wall mount only. Small single head LED floodlight. Maintenance-free LEDs with 35,000 hours of life. Integral photo control automatically turns lights on at night and off during the day. Heavy duty die-cast aluminum construction. Hooded design protects fixture from rain and directs light outward. Tool-less head adjustment. Wall or eave mount. 120 volt AC, 60Hz. cULus Listed. Single head LED floodlight. Maintenance-free with 35,000 hours of life. 1900 Lumens. 5000K color temperature. Wall or eave mount applications. Heavy duty die-cast aluminum construction. 120 volt AC, 60Hz. cULus Listed for wet locations.
Single head LED floodlight. Maintenance-free with 35,000 hours of life. 1900 Lumens. 5000K color temperature. Wall or eave mount applications. Heavy duty die-cast aluminum construction. 120 volt AC, 60Hz. cULus Listed for wet locations. For outdoor use only. Easy installation, no wiring needed, mounts almost anywhere. Provides light in remote areas. Solar panel uses sunlight to charge a rechargeable battery pack (included)during the day. Fixture motion sensor turns the light ON with motion at night. Adjustable time setting for 1 to 3 minutes. Photocell only allows the fixture to turn on at night. 180 degree coverage, up to 70'. LED light bulb. Includes light fixture, 6" x 8" solar panel for maximum charging power, with 16' cord. cULus Listed for wet location use. Up to 70 foot, 180 degree detection range with adjustable detection sensitivity. Pulse count for detection reliability. Flashing LED for daytime detect notification. 330 lumen output.
For outdoor use. Easy installation, no wiring needed. Solar panel uses sunlight to charge the sealed lead acid, 6 volt, 5.0 Amp-Hour battery during the day. Pulse Count technology reduces false sensing from wind and rain. Photocell turns on light when motion is detected, automatically turns light off after 30 seconds, keeps the light off during daylight hours. Battery protection circuitry prevents excessive overcharge and undercharge. When fully charged the solar light will operate a maximum of 15 days without sunlight. Actual operating time will vary depending upon how frequently the light is triggered. Range up to 60 feet, varies with surrounding temperature. Sensing angle up to 110 degrees, covers 3,400 square feet.  Includes light, 15 watt halogen T4 bi-pin quartz bulb, battery, battery case, sensor, solar panel and 5 mounting screws (2 sizes). Motion sensor turns light on automatically when motion is detected and off after a preselected time delay, up to 12 minutes. Motion sensor detects motion in 110, 180 and 270 degrees of coverage up to 70'. Manual override feature allows fixture to be operated as a floodlight for up to 6 hours. Integral photocell ensures lights are only activated with motion at nighttime. Heavy duty die-cast aluminum construction. Maintenance-free LEDs with 35,000 hours of life. 5000K color temperature. 120 volt AC, 60Hz. cULus listed for wet locations. Motion sensor turns light on automatically when motion is detected and off after a preselected time delay, up to 12 minutes. Motion sensor detects motion in 110, 180 and 270 degrees of coverage up to 70'. Manual override feature allows fixture to be operated as a floodlight for up to 6 hours. Integral photocell ensures lights are only activated with motion at nighttime. Heavy duty die-cast aluminum construction. Maintenance-free LEDs with 35,000 hours of life. 5000K color temperature. 120 volt AC, 60Hz. cULus listed for wet locations.
   
 
1