Home > ELECTRICAL > ROUGH ELECTRICAL > SWITCHES & RECEPTACLES > GFCI RECEPTACLES/SWITCHES
Sort By:
1
Should be installed only on a grounded 125 volt AC circuit which is protected by a single fuse or circuit breaker. End of life function stops voltage in the event of a GFCI component failure. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets UL 943 requirements. 15 amp, 125 volt. Should be installed only on a grounded 125 volt AC circuit which is protected by a single fuse or circuit breaker. End of life function stops voltage in the event of a GFCI component failure. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets UL 943 requirements. 15 amp, 125 volt. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if wired incorrectly. End of life function stops voltage in the event of a GFCI component failure. 20 Amp/125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
UL 943-2006 compliant. Lock out function will not allow GFCI to reset if wired incorrectly. End of life function stops voltage in the event of a GFCI component failure. 20 Amp/125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements.
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements.
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements.
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements.
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
TR GFCI DESERT SAND
Our Price: $13.85
TR GFCI WHT SATIN
Our Price: $13.85
TR GFCI SILVER GRANITE
Our Price: $13.85
GFCI receptacle. Test and reset buttons match the two-tone color combinations of the receptacle. UL listed, fully compliant with 4th edition Class A GFCI, UL 498 requirements. Indicator light makes certain installation is correct and provides quick visual reference of a tripped or "end of life" connection.  Ground screw back wiring clamp for secure termination. 8 back wiring holes accept up to #10 AWG stranded or solid wire. Terminal screws are backed out, staked and ready to wire. Built-in wire stripper. Welded back body, virtually unbreakable. 120 volt, 15 amp. Tamper resistant receptacles have a UL Listed shutter system. 15 amp, 125 volt. GFCI receptacle. Test and reset buttons match the two-tone color combinations of the receptacle. UL listed, fully compliant with 4th edition Class A GFCI, UL 498 requirements. Indicator light makes certain installation is correct and provides quick visual reference of a tripped or "end of life" connection.  Ground screw back wiring clamp for secure termination. 8 back wiring holes accept up to #10 AWG stranded or solid wire. Terminal screws are backed out, staked and ready to wire. Built-in wire stripper. Welded back body, virtually unbreakable. 120 volt, 15 amp. Tamper resistant receptacles have a UL Listed shutter system. 15 amp, 125 volt. GFCI receptacle. Test and reset buttons match the two-tone color combinations of the receptacle. UL listed, fully compliant with 4th edition Class A GFCI, UL 498 requirements. Indicator light makes certain installation is correct and provides quick visual reference of a tripped or "end of life" connection.  Ground screw back wiring clamp for secure termination. 8 back wiring holes accept up to #10 AWG stranded or solid wire. Terminal screws are backed out, staked and ready to wire. Built-in wire stripper. Welded back body, virtually unbreakable. 120 volt, 15 amp. Tamper resistant receptacles have a UL Listed shutter system. 15 amp, 125 volt.
Tamper and weather resistant specification grade, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, Meets all UL943 (GFCI) and UL498 (Receptacles) requirements, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. TR and WR designations provide visual identification. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
Tamper and weather resistant specification grade, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, Meets all UL943 (GFCI) and UL498 (Receptacles) requirements, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. TR and WR designations provide visual identification. UL, cULus Listed. Specification grade blank face GFCI. 2-pole, 3-wire grounding 20 amp feed-through rating. Chemical and impact-resistant thermoplastic construction. Longer, wider bridged strap. 8 separate backwiring holes that accept up to #10 AWG stranded or solid wire. Ground screw backwiring clamp. Terminal screws are backed out, staked, and ready to wire. Large visual indicator light. Color-matched and recessed Test and reset buttons with matching thermoplastic wallplate included. 20 amp, 125 volt. UL Listed, fully compliant with all latest UL 943 (4th edition) Class A GFCI, UL 498 requirements and UL 508 for 1-1/2 HP motor control switch. Carded. Tamper and weather resistant specification grade, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, Meets all UL943 (GFCI) and UL498 (Receptacles) requirements, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. TR and WR designations provide visual identification. UL, cULus Listed.
Tamper and weather resistant specification grade, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, Meets all UL943 (GFCI) and UL498 (Receptacles) requirements, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. TR and WR designations provide visual identification. UL, cULus Listed. Compact design single gang combination switch/GFCI-protected receptacle. Switch handles motor loads of up to 12 amps. Mid-size wallplate. Color-matched and recessed test and reset buttons. Large indicator light to show tripped or end of life condition. Durable chemical and impact-resistant thermoplastic construction. Built-in wire stripper. 8 separate backwiring holes that accept up to number 10 AWG stranded or solid wire for maximum flexibility. Longer, wider bridged strap provides 40 percent more contact area with wallboard. Terminal screws are backed out, staked, and ready to wire. Captive mounting screws reduce installation time. 15 amp at face, 20 amp feed-through. NEMA 5-15 switch 1800 watts at 120 volts, 60Hz AC only. Compact design single gang combination switch/GFCI-protected receptacle. Switch handles motor loads of up to 12 amps. Mid-size wallplate. Color-matched and recessed test and reset buttons. Large indicator light to show tripped or end of life condition. Durable chemical and impact-resistant thermoplastic construction. Built-in wire stripper. 8 separate backwiring holes that accept up to number 10 AWG stranded or solid wire for maximum flexibility. Longer, wider bridged strap provides 40 percent more contact area with wallboard. Terminal screws are backed out, staked, and ready to wire. Captive mounting screws reduce installation time. 15 amp at face, 20 amp feed-through. NEMA 5-15 switch 1800 watts at 120 volts, 60Hz AC only.
GFCI denies power if the device is mis-wired or if it is no longer providing GFCI protection. Combination GFCI with nightlight adds an additional safety feature by providing light at night. The Tamper Resistant shutters prevent foreign objects from being inserted and provide code compliance for both residential and commercial applications. Back and side wire. 15A 125V NEMA 5-15R. Nightlight is controlled by a light sensor that turns the light ON in the dark and OFF in light. LEDs produce color temperature of 3000-3500K for a warm incandescent-like glow. Standard size unbreakable wallplate included. cULus Listed and NOM certified. GFCI denies power if the device is mis-wired or if it is no longer providing GFCI protection. Combination GFCI with nightlight adds an additional safety feature by providing light at night. The Tamper Resistant shutters prevent foreign objects from being inserted and provide code compliance for both residential and commercial applications. Back and side wire. 15A 125V NEMA 5-15R. Nightlight is controlled by a light sensor that turns the light ON in the dark and OFF in light. LEDs produce color temperature of 3000-3500K for a warm incandescent-like glow. Standard size unbreakable wallplate included. cULus Listed and NOM certified. Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired.  UL Listed. Meets all UL Hospital Grade requirements.
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Protects expensive electronics from surge strikes. Protection up to 12kA peak surge current, 340 joules energy rating, 600 volt peak voltage protection rating. Large cable organizer opening to manage and conceal cables. Audible signal protection failure. Allows for continued use of receptacle after protection failure. Provides simple surge module replacement without re-wiring. Mounts horizontally or vertically for flat panel TV installations. Installs with no additional parts needed. 15 amp 125 volts AC. cETLus listed to UL514C, CSA C22.2, No 42.
   
 
1