Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > SAFETY SWITCHES
Sort By:
1
Single phase, 1 pole, 2 wire, solid neutral, 120/240 volt AC. Rated 2 HP at 120 volt AC, with metallic enclosure. Typical loads include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1. 5.00" x 7.63" x 4.00". Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. Typical uses include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. 5.00" x 7.63" x 4.00". UL Listed, meets NEMA standard KS1. For residential or light commercial applications where duty is not severe. 2 pole, 3 wire, plated copper solid neutral and phase conductor parts. Uses plug fuses, 240 volt AC. Rated 1-1/2 HP NEC standard and 3 HP time delay at 240 volt AC, single phase. Typical loads include workshops, pumps, furnaces, water heaters and washers/dryers. Lightweight, corrosion resistant GE Valox thermoplastic enclosure with black matte finish. Front slides vertically to turn on and off. Use only 14-10 AWG copper wire. 4-3/8" x 7-5/8" x 2-1/2". UL Listed (Enclosed Switches No.98); meets or exceeds NEMA standard No.KS1-1990 for type GD enclosed switches.
Steel enclosure. 2 pole, 3 wire, general duty safety switch, plug fuse type, (Type S, T, OR W) fusible with neutral NEMA 1. 120/240 volt rating. 1/2 HP at 120 volt, 1-1/2 HP at 240 volt. Does not have an interlock to prevent opening when switch is in the on position. UL Listed. Single phase, 2 pole, 3 wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 volt AC. With metallic enclosure for indoor use. Designed to open or close an electrical circuit in general duty applications. Rated 1-1/2 HP. For residential or commercial applications. For PK3GTA-1 field installable service ground bar kit. ANSI Certified and UL Listed. Single phase, 2 pole, 3 wire (2 blades, fuseholders and 1 neutral), 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. 10,000 AIC (short circuit rating) with class H cartridge fuses. NEMA type 1 enclosure. Terminal lug data: (1) #12 - 6 Al or #14 - 6 Cu. wire. Service ground bar kit PKGTA1 sold separately. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1.
Designed for residential or light commercial application where duty is not severe. Meets or exceeds NEMA Enclosed Switch Standard KS1-1983 for type GD, CSA certified; 60 degrees C/75 degrees C conductor rating. Two pole, 120/240 volt AC; 250 volt DC. Removable closing cap. Accepts Class H fuses (not included). Feature quick-make, quick-break mechanisms. 6-1/2" x 10-5/8" x 3-5/16". Suitable for use as service entrance equipment when installed in accordance with National Electrical Code. UL Listed. Steel enclosure. 2 pole, 3 wire, 2 blades, 2 class H cartridge fuses (not included), solid neutral, 120/240 volt AC. Rated 1-1/2 to 3 HP single phase, 3 to 7-1/2 HP 3-phase at 240 volt only when dual element fuses are used. For residential and commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 RMS, symmetrical fault current. Bolt on hub provided. DS100GK ground kit sold separately. 6-1/6" x 7-1/2" x 6-3/4". UL Listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1. Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt. 10,000 AIC with plug fuses (not included). Metallic enclosure. Rated 1-1/2 HP standard/3 HP maximum. Compact size, quick-make, quick-break mechanism. Suitable for use as service entrance equipment. Cover interlock. Bottom cable entry and exit only, no hub provision supplied. Padlocking provision to lock cover closed or to lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. #14-6 AWG line, #14-8 load lug wire ranges. 5-1/2" x 8-1/4" x 5-13/16". UL Listed file No.E4776, NEMA type GD, meets federal specifications WS865C.
Designed for residential or light commercial applications where duty is not severe. Meets or exceeds NEMA Enclosed Switch Standard KS1-1983 for type GD, CSA certified; 60 degrees C/75 degrees C conductor rating. Two pole, 120/240 volt AC; 250 volt DC. Removable closing cap. Accepts Class H fuses (not included). Feature quick make, quick break mechanism. Suitable for use as service entrance equipment when installed in accordance with National Electrical Code. 6-7/8" x 9-7/8" x 3-5/16".UL Listed (Enclosed Switches No. 98). Single phase, 2 pole, 3 wire, 240 volt, 10,000 AIC maximum, rated 10 HP maximum. Compact size, quick-make, quick-break mechanism, galvanized steel enclosure. Bottom cable entry and exit only, no hub provision supplied. Padlocking provisions to lock cover or lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. GSGK60 equipment ground kit sold separately. Number 14-3 AWG line and load wire range. 5-9/16" x 8-1/4" x 3-1/8". UL Listed file No.E4776, NEMA Type GD, meets federal specifications WS865C. Single phase, 2 pole, 3 wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 volt AC, with metallic enclosure. Bolt on hubs. Rated 1-1/2 HP. For residential or commercial applications. Typical loads include lighting, air conditioning, appliances and branch circuit disconnects. 7.25" x 9.63" x 3.75". UL Listed, meets NEMA 3R standard.
Steel enclosure. 3 pole, 4 wire, 3 blades, 3 class H cartridge fuses (not included), solid neutral, 120/240 volt AC, Rated 1-1/2 to 3 HP single phase, to 7-1/2 HP 3-phase at 240 volt only when dual element fuses are used. For residential or light commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 RMS, symmetrical fault current. Ample wire bending space for easier installation. DS100GK ground lug kit sold separately. 6-3/4" x 9-1/8" x 6-3/4". UL Listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1.
   
 
1