Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS > ELECTRICAL TAPE/DUCT SEAL
Sort By:
1
Black PVC electrical tape is UL Listed to 600 volt. 7.5 mil. thickness and a temperature rating up to 80 degrees Celsius/176 degrees Fahrenheit. Elongation of 200 percent allows tight wrapping and sealing. General purpose electrical insulating tape, good dielectric strength. 7 mils thick. UL Listed and CSA Certified. For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.
For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified. For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.
For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified. For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified. For use over electrical tape splices. Matted finish provides the best gripping surface available. Use to wrap grips on hand tools.
For insulating, repairing and protecting electrical wire. UL Listed. Malleable non-conductive compound for sealing of electrical raceway connections from air, noise and moisture. Insulates and seals surfaces. Fuses to itself during application to stay watertight. Suitable for applications up to 600 volt. Temperature range from 0 to 176 degrees Fahrenheit.
Commercial grade 7-mil polyvinyl chloride insulating tape, flame retardant and provides mechanical protection with minimum bulk. Excellent resistance to abrasion, moisture, acids, copper corrosion and varying weather conditions. UL Listed and CSA Certified. General purpose black electrical tape. Made from low-lead PVC material. Suitable for applications up to 600 volt. Temperature range from 0 to 176 degrees Fahrenheit. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. Usage temperature up to 80 degrees C. Contains lead. 5 colors, white, red, yellow, green and blue. UL Listed.
Designed for general purpose electrical applications. Made from low-lead PVC material. For applications up to 600 volt. Temperature rating up to 176 degrees F. Includes one each blue, green, red, white and yellow. UL Listed. For use over electrical tape splices. Matted finish provides the best gripping surface available. Use to wrap grips on hand tools. Good abrasion resistance, used for protection for electrical tape splices and connectors. Made in the USA. UL Approved.
Vinyl electrical tape, black, 7 mil thick with PVC backing, provides protective jacketing for high-voltage cables and wire harnesses, and primary electrical insulation for splices up to 600 volt. Abrasion, corrosion, and UV resistant, resists alkalis and acids, and is flame-retardant. All-weather performance in cold to 0 degrees F or heat to 220 degrees F. UL Listed and CSA Certified. Resists water, oils, alkalies, acids, weather, ultraviolet rays, abrasion, corrosion and moisture. Use as a primary insulation for wide cable splices up to 600 volt, for fixture and wire splices up to 1000 volt and to maintain electrical and high temperature integrity of electrical systems. 7 mil, UL Approved and CSA Certified. Semi-cured rubber for low voltage electrical insulation, 30 mil. Self-vulcanizing and water resistant.
Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified. Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified. Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified.
Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified. Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified. Self-sealing silicone repair tape. Stretch, wrap, and protect or repair everything from leaky hoses, pipe insulation, electrical connections, tool handles, air ducts and cord/rope ends. Non-adhesive formula leaves no sticky residue. Waterproof and insulate with no extra equipment or heat required. Stretches up to 300 percent of its original length with 60 ppi tear strength. Begins to bond immediately on contact with itself. Repositioning is not recommended after 2 minutes of contact, and the bond is permanent within 24 hours. Operates and remains flexible from -60 degreesF (-51 degreesC) to 500 degreesF (260 degreesC).
Resists water, oils, alkalies, acids, weather, ultraviolet rays, abrasion, corrosion and moisture. Use as a primary insulation for wide cable splices up to 600 volt, for fixture and wire splices up to 1000 volt and to maintain electrical and high temperature integrity of electrical systems. 7 mil, UL Approved and CSA Certified. General purpose black electrical tape. Made from low-lead PVC material. Suitable for applications up to 600 volt. Temperature range from 0 to 176 degrees Fahrenheit. Self-fusing 20 mil tape, watertight seal for plumbing, auto, marine and general purpose applications.
Economical, general purpose, rubber, highly conformable, linerless Ethylene Propylene based electrical insulating tape. Weather Resistant. Uniform tape unwind, small roll size (OD). Five year shelf life. Stable over wide application and temperature range, temperature rating of 194 degrees F continuous, 266 degrees F short-term. Designed for all-voltage splicing, jacketing, and general insulating use in splicing and terminating wires and cables. Flame retardant, physical and electrical properties unaffected by degree of stretch. Provides immediate moisture seals and void free buildup. 30 mils thick, 250 psi tensile strength, 1000 percent ultimate elongation. Thick 8.5 mil. Recommended for low temperature applications because of its superior cold weather handling features. Flexible for use on small wires. Inside or outside. Resists cold, ultraviolet rays, moisture, alkalies, acids and corrosion. Insulates and protects against abrasion, weather, water, solvent splashes and chemicals. Stretchy, vinyl plastic. Applications include home, marine, auto, trailers and tools. Flame retardant. Pack of 5 colors.
General purpose black electrical tape. Made from low-lead PVC material. Suitable for applications up to 600 volt. Temperature range from 0 to 176 degrees Fahrenheit. Black vinyl electrical tape for common electrical uses. 7 mil., UL Approved. UL Approved black electrical insulating tape.
UL Approved black electrical insulating tape.
   
 
1