Home > ELECTRICAL > SPECIALTY ELECTRICAL > TOOLS & TESTERS > CIRCUIT/VOLTAGE TESTERS
Sort By:
1
Test for presence of voltage in live circuits. 60-500 volt AC/DC. For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors. Tests AC/DC voltage from 5-50 volt. Glows when voltage is present and brightens as voltage increases. Insulated alligator clip tests leads. UL Listed. Carded.
Tests standard receptacles and extension cords to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle or extension cord (110 /125 volt circuits). Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provides indication of circuit status or specifies wiring errors. Used to test DC voltage in automotive applications. Features 3' test lead with alligator clamp and 360 degree bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required. Large, dual, neon indicators acknowledge presence of voltage. Individual indicators for each voltage range assures reliability of testing. Probes snap on bottom of housing for single hand testing of outlets. Insulated leads and housing. Tests from 100 to 300 volt AC/DC. UL Listed.
Three-way live circuit tester indicates 120, 240 and 277 volt AC. UL Listed. Tests for breaks in non-energized wires or cords. 360 degree visual indication. Durable, heavy-duty tip. Flexible lead with insulated alligator clip. Pocket clip. Operates from 2 AAA batteries (included). Economy continuity tester, tests continuity in nonenergized circuits. Features 36" insulated lead with alligator clip end. Fully shielded indicator bulb lights to indicate continuity, Uses 2 AA batteries, not included.
Live circuit tester indicates 120, 240, 480 AC and 150, 300 and 500 volt DC. 36" test lead, bright neon indicators. Rugged twin probe design features heavy-duty test lead insulations. UL Listed. Tests ground fault breakers by overloading circuit and tripping GFCI. Plug tester into any ground fault receptacle (110-125 volt AC) and press black button to overload circuit. Tests for seven conditions; ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provide indication of circuit status or specify which wire is defective. Carded. Test continuity without wire probes on non-energized circuits. Tests AC/DC voltage from 12 to 250 volts on energized circuits. Glows when voltage or continuity exists. Uses 2 button batteries, included. UL Listed. Carded.
LOW/GOOD indicator. Movable contact arm to fit AA, AAA, C, D, 9 Volt and 1.5 volt button cells. Checks if battery is charged or needs replacing. Tests from 1.5 volt button cells to 22.5 volt photo and lantern cells. Tests condition of nickel-cadmium rechargeable batteries. Contains the most common wiring tools and a voltage tester. Includes one No.GS-67 multi-function crimper/stripper, one No.CR-100 cable ripper and one GET-102  90-300 volt AC/DC circuit tester.
Tests from 50-600 volt AC. Visual (flashing) and audible (beeping) indicators signal presence of voltage. Built-in "safe test" feature to assure batteries are operating properly. Compact design with pocket clip to fit in shirt pocket. Uses 1 AAA battery, not included. UL Listed. Detects AC voltage without contacting live wires. For indoor use. Tri-directional momentary On/Off switch. Uses 2 LR44 button cell batteries, included. 50-600 volts AC, 50-60 Hz operating range. Audible and visual alert. Includes snap-on pocket clip. UL Listed. Contains the most common circuit testers for convenient electrical troubleshooting. One each No. GCT-204 continuity tester, No. GRT-500 receptacle tester and No.GET-102 90-300 volt AC/DC circuit tester.
Use with CS61200 Sperry breaker finder to trace live wiring other than to an outlet, such as lighting fixtures. Compact, tests AC/DC voltage to 300 volt, DC current to 250mA, resistance to 1 M ohm, decibels from -20 to +56dB. Diode protected. With fuse overload protection circuitry. 250 mA fuse. Includes safety test leads and instruction manual. CAT Rating: II 300 volt. cETLus Approved. For testing AC/DC voltage and current resistance. Low battery indicator. DC voltage 600. AC voltage - 500 volts AC. Resistance - 2 meg Ohms. Input impedance of  10 meg Ohms. Rated CAT 111 600 volts, cETLus and CE. Uses one 9 volt battery, not included.
Tests standard 3-wire and GFCI protected 120 volt outlets. Detects hazardous ground conditions not identified by standard outlet testers. Three color LEDs indicate 7 common wiring conditions. GFCI function tests standard outlets that are wired in series with GFCI outlets. Soft grip ergonomic design. Test AC/DC voltage from 120 - 480 volts, 50-60 Hz and DC polarity. Dual voltage indication: solenoid vibration and neon bulb. Neon bulb indicates DC polarity.  Probes lock together for one handed testing of standard outlets, separate for up to 4' reach. Tests outlets, panels, switches, circuit breakers and light fixtures. UL Listed. Strips and loops cable, crimps terminals and cuts and rethreads bolts. With ArmorEdge stainless steel construction for nick-resistant blades, overall durability and maximum corrosion resistance. Strips solid or stranded wire. Bolt cutting station, knurled pliers nose, wire looping stations and dual grip positions for traditional or forward hand positions. With CAM-10 snap-in removable sensor in the handle to detect AC voltage without contacting live wires. UL Listed. Carded.
Voltage-sensing long nose pliers cut wire and cable, crimp terminals and strip wires. Features over-molded, comfort grip, kurled plier nose and multi-purpose gripper, terminal crimping station and wire stripper for number 18 stranded and number 12 and 14 solid wire. With Cam-10 snap-in sensor to detect AC voltage without contacting live wires. With protective rubber boot. For testing AC/DC voltage and current resistance. Tests 1.5 and 9 volt batteries. Low battery indicator, auto off. DC voltage 250. AC voltage - 500 volts AC. Resistance - 2 Meg Ohms. Input impedance of  10 meg Ohms. Rated CAT 111 600 volts, cETLus and CE. Uses one 9 volt battery, included. Compact, for testing AC/DC voltage to 1000 volt, DC current to 10 amp, resistance to 10 Meg. and decibels from -8 to +62dB. Audible continuity, battery testing of 1.5 and 9 volt, manual range selection of 500 mA and 10 amp fuses. Includes batteries, test leads, spare fuse and operating instructions. UL Listed, CAT II 1000 volt rated.
Cuts wire and cable, crimps terminals and hammers staples. Over-molded, comfort grip, forged steel construction, features cross knurled jaws, built-in hammer head surface, terminal crimping station and precision hardened cutting blades. With Cam-10 snap-in sensor to detect AC voltage without contacting live wires. Strips and loops cable, crimps terminals and cuts and rethreads bolts. With ArmorEdge stainless steel construction for nick-resistant blades, overall durability and maximum corrosion resistance. Strips solid or stranded wire. Bolt cutting station, knurled pliers nose, wire looping stations and dual grip positions for traditional or forward hand positions. With CAM-10 snap-in removable sensor in the handle to detect AC voltage without contacting live wires. UL Listed. Carded. Self-calibrating receiver with audible and visual indicators. Self-powered transmitter with audible and visual indicators. Working voltage range of 80-140 volts AC maximum to ground at 50-60 Hz. Operating temperature 32 to 122 degrees F. Storage temperature -4 to 158 degrees F. Power supply for the receiver is one 9 volt transistor type battery, not included. Transmitter is 3.3" height x 2.6" width x 1.1" depth, 2.5 oz. Receiver is 6.3" height x 3.4" width x 1.3" depth, 5.1 oz. UL Listed to both US and Canadian standards.
Gives instant, accurate digital readout of 0-15.0 amp or 0-1875 watts used by common cord-connected household appliances and lights. Slide-switch instantly converts between amp and watts. 26" cord plugs in to 15 amp electrical outlet, appliance plugs into tester. Rugged, high-impact construction. UL listed. Standard batteries with auto shutoff to save battery life. Includes auto range, diode test, audible continuity, 7 function, 7 ranges (off included), 3999 display count. AC volts range positions: auto range (maximum 500 volt AC), 200 mV 2 volt, 20 volt, 200 volt, 500 volt. DC volts range positions: auto range (maximum 600 volt DC) 200 mV 2 volt, 20 volt, 200 volt, 600 volt. Resistance (Ohms) auto range (maximum 20 M) 200, 2k, 20k, 200k, 2M, 20M. Rated CAT III 600 volt. Uses 2 AAA batteries, included. With overload protection on all ranges, 3.75 digital liquid crystal display (LCD), maximum reading 3999. Maximum 450 volts. Range hold, continuity, diode test. Built-in test leads, 2 times per second sampling rate. Auto power off after approximately 10 minutes. Operating environment: 32 degrees to 104 degrees F. Storage temperature: -4 to 140 degrees F. 300 hours typical life with carbon zinc batteries. Operates from (2) LR44 batteries, included. C-77 booklet style carrying case and operating instructions included. cULus Listed to both US and Canadian standards. Meets CE requirements. 4-1/4" height x 2-1/4" width x 1/2" depth.
With protective rubber boot. For testing AC/DC voltage, current resistance, diodes, temperature. Tests 1.5 volt batteries. Easy to read backlit display. Low battery indicator, auto off. Audible continuity. DC voltage 250. AC voltage - 500 volts AC maximum. Resistance - 20 Meg Ohms. Input impedance of  10 meg Ohms. Temperature test with probe -40 to 1832 degrees Fahrenheit. Magnetic strap included. Rated CAT 111 600 volts, cETLus and CE. Uses two AAA batteries, included. Tests all coax and Cat 3-6 patch cords and installed cables for opens, shorts, miswires, reversals and shield continuity. Test all wiring applications in the home or office. Includes 4 high quality test products, the GVD-3504A non-contact circuit alert to test AC voltage presence, GFI-3501A ground fault receptacle tester to test correct wiring of outlets, GTT-3200 dual telephone line tester to check for proper wiring of telephone jacks and the GDT-311 5-function, 11-range digital multimeter with test leads to test AC and DC voltage, DC current, resistance, and continuity. Comes with a durable plastic case with a foam insert to protect and hold products in place.
Large display, includes test lead input icons for accurate lead placement. Includes auto range, diode test, audible continuity, 9 function, 10 ranges (off included), 3999 display count. AC volts range positions: auto range (maximum 750 volt AC) 4 volt, 40 volt, 400 volt, 750 volt. DC volts range positions: auto range (maximum 1000 volt DC) 400 M volt, 4 volt, 40 volt, 400 volt and 1000 volt. AC amps: auto range (maximum 10 amp AC) 400  uA, 4000 uA, 40 mA, 400 mA, 4 amp, 10 amp. DC amps: auto range (maximum 10 amp DC) 400 uA, 4000 uA, 40 mA, 400 mA, 4 amp, 10 amp. Resistance (Ohms) auto range (maximum 40 M) 400, 4k, 40k, 400k, 4M, 40M. Capacitance auto range 40 nF, 400 nF, 4 uF, 40 uF, 100 uF. Frequency auto range 10Hz to 100MHz. Rated CAT III 600 volt, CAT II 1000 volt. Uses one 9 volt battery, included. Measures AC current and voltage, DC voltage and resistance. LockJaw feature enables jaw to open only when positioned in correct setting. Data hold feature retains values. Spare fuse included. SPECIFICATIONS: AC voltage-600, DC voltage-60, AC amp-600, Ohms 1M, Fuse-500mA, Total Ranges-8. Measures AC current and voltage, resistance and continuity. Auto ranging feature selects proper range for function. Accommodates conductors up to 1" in diameter. Data hold feature retains values. 2 AAA batteries included. SPECIFICATIONS; AC voltage-600 volt, AC current-600 amp, Resistance-200 Omega. Accuracy: AC voltage +1.5 percent, AC current +2.0 percent, Resistance +1.0 percent. Total ranges - 3.
   
 
1