Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 ... 5
Can be solvent welded or inserted into Schedule 40 DWV pipe, so that the drain pipe can be cut flush with the finished floor. Also suitable for use as a vent stack or air inlet strainer. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Strainer dome cover with screw.
4-1/4" square tile ring. Stainless Steel. Carded. Can be solvent welded or inserted into Schedule 40 DWV pipe, so that the drain pipe can be cut flush with the finished floor. Also suitable for use as a vent stack or air inlet strainer.
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged. 1-3/4" adjustable wall-mount showerhead. Chrome finish. ABS construction. Variable spray: fine and soft. Easy lever control for spray adjustment. Meets WaterSense certificate.
Can be solvent welded or inserted into Schedule 40 DWV pipe, so that the drain pipe can be cut flush with the finished floor. Also suitable for use as a vent stack or air inlet strainer. Standard 1/2", Plastic. Overall length 7". Chrome plated face plate screws.
Standard 1/2", Plastic. Overall length 7". Saves energy and water by reducing water flow to less than three gallons per minute. Installs to standard 1/2" shower arms. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
Shower flow adjuster. 1/2" IPS. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate. 3-5/16" O.D. 6.88" h x 4-3/4" w.
Shower arm diverter, plated plastic, connects personal shower and shower head. 1/2" F.I.P. x 1/2" M.I.P. x 1/2" M.I.P For shower heads and arms. Bagged. For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger.
Rubber washer for Toe Touch drain assembly. Zinc body. Screws included. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe. Includes screws. 2" center to center holes. Carded.
Plated plastic. Flow control and shut off. Threaded shaft.
Plated plastic. Flow control and shut off. Fits 2" outlet.
ABS construction, adjustable spray, metal ball joint. Pipe tape included. Designed for use with preformed shower stall bases. Drain seals to the base with fiber and rubber washers. 2" Schedule 40 DWV pipe solvent welds to the drain base. Drain top accommodates 4-1/4" universal Snap-Tite strainers with white plastic strainer. With white plastic strainer. Trip lever for drain control. Includes screws.
Installs easily between standard shower arm and head.  Push button control easily adjusts spray force from full to a trickle, great for saving while lathering, shampooing, etc. Made in USA Trip lever for drain control. Includes screws. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
Receptor base design allows secondary drainage if leak occurs around strainer. Easy, trouble-free installation from inside of shower stall. Base solvent welds over Schedule 40 DWV pipe for full flow. Integral pipe straps in base with stainless steel strainer. 1/2" IPS. Threaded shaft.
Washer for 1-1/2" bath waste strainer. 4-1/4" square snap-tite strainer. Carded. 3-3/4" stainless steel strainer, brass body.
ABS construction. Metal ball joint. Shower arm mount. Zinc swivel ball. 1/2" IPS.
72" PVC hose with metal hex nuts. Includes 2 pc washers and pipe tape. 1-3/4" adjustable telescoping fit. Slide connect allows for fast installation for 1/2" copper stub.  Chrome plated zinc body. Tapped with 3/4" IPS with internal 3/4" x 1/2" face bushing.  Chrome plated zinc body.
2.5 gpm max. Chrome plated brass connector & ball. Four spray settings: wide spray, fast pulsating jets, spray and pulse, & pause (trickle). 1 setting fixed mount. ABS construction. Metal ball joint. Pipe tape included. Designed for use with preformed shower stall bases. Use for slab construction. Sealed to the shower base with a fiber and rubber washer. 2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking. Drain accommodates 4-1/4" universal SnapTtite strainer. Can be used with 1-1/2" schedule 40 DWV pipe and 1-1/2" or 2" copper DWV pipe when caulking gasket is replaced. SKU NO. 222.9979 with stainless steel strainer. SKU NO. 643.2991 with white plastic strainer.
3/4'' IPS with reducer bushing for 1/2''. 1 setting fixed mount. ABS construction. Metal ball joint. Pipe tape included.
ABS construction. Metal ball joint. 2" or 3" PVC drain with round stainless steel snap-tite strainer. Designed for use on built-up shower bases of tile or marble, where a shower pan liner is used. Low profile design for use in tight spaces.  Solvent welds over 2" or inside 3" schedule 40 DWV pipe. 3/4'' IPS with reducer bushing for 1/2''.
   
 
1 2 3 ... 5