Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES
Choose a sub category:
GAS VALVES NEEDLE VALVES HOSE BIBBS
BOILER DRAINS STOP VALVES STOP & WASTE VALVES
GLOBE VALVES WATER SUPPLY LINE VALVES BALL VALVES
GATE VALVES CHECK VALVES FOOT VALVES
SILLCOCKS FROSTPROOF SILLCOCKS YARD HYDRANTS
VALVE/SILLCOCK HANDLES VALVE BOXES & COVERS MISC VALVES & FITTINGS
Sort By:
1 2 3 ... 8
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
12 point
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 12 point
Fits most drainable valves. 3 styles of caps with washers included. 16 point Tapered non-metallic valve seat and stem guarantee long wear. Quick, safe and permanent solvent weld installation to CPVC piping. Strong and secure compression connection to plastic riser. Meets/exceeds all applicable ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF? CPVC. NSF Standard 61 listed.
3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
CPVC construction. For use in hot or cold fluid systems up to 100psi at180 degrees Fahrenheit. Beige color body with red wheel handle. TPE seal for chemical resistance. Made with EverTUFF CPVC. Complies with all applicable ASTM and ANSI standards. For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed. CPVC construction. For use in hot or cold fluid systems up to 100psi at180 degrees Fahrenheit. Beige color body with red wheel handle. TPE seal for chemical resistance. Made with EverTUFF CPVC. Complies with all applicable ASTM and ANSI standards.
Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 7", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards.
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Durable sonic welded thermo-plastic body.
3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
CPVC construction. 180 psi working pressure at 73 degrees Fahrenheit. EPDM stem O-ring, low torque design for ease of operation. Made with FEverTUFF CPVCl. Complies with all applicable ASTM and ANSI standards. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
   
 
1 2 3 ... 8