Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (NON-WELL) > SUMP PUMPS
Sort By:
1
Designed for continuous duty applications such as draining flooded basements, emptying water filled boats, and romoves water down to 3/8" of surface from sinks, tubs, stock tanks, and flat roofs. Constructed with an impact and corrosion resistant housing, volute, and impeller. Designed with a 1-1/4" discharge and comes with a 3/4"garden hose adapter. High efficiency motor is oil-free and removes up to 3000 GPH of water. Durable thermoplastic body resists corrosion. Efficient motor with 115V thermal overload protection. Vertical float switch designed for minimum 12" diameter sump basin. Pumps up to 3480 GPH. CSA certified. Thermoplastic with vertical float switch. Pumps up to 2800 GPH at 5', reliable thermoplastic volute and impeller, corrosion-resistant thermoplastic column and stainless steel fasteners, adjustable vertical float allows homeowners to change the operating cycle to fit their application, heavy-duty, air-cooled motor is thermally protected to prevent overheating, high capacity 1-1/2" NPT discharge. Will replace most submersible sumps without plumbing changes. Designed for 14" diameter or larger sump basins.Pumps up to 3200 gph at 0'.
Durable thermoplastic body resists corrosion. Efficient motor with 115V thermal overload protection. Vertical float switch designed for minimum 12" diameter sump basin. Pumps up to 3480 GPH. CSA certified. 1/3HP split capacitor motor - high efficiency - low Amp draw, 10' grounded waterproof cord, pumps up to 40 gallons per minute, 2400 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4" male iron pipe discharge thread, 1-1/4" female pipe adapter and 1-1/2" male iron pipe adapter included. One year warranty from Superior Pump Co. For use in sump basins 12" or larger. Thermoplastic base, fully adjustable automatic switch, steel drive shaft, metal switch arm, 1-1/4" discharge. 2.76 amps, 10' cord. One year warranty from Superior Pump.
Features impact and corrosion resistant thermoplastic housing, a top suction intake to filter debris, and a high-torque 120V motor. The pump also features a tethered float switch for operations within basins 14" or wider. Designed with a 1-1/2" NPT discharge for easy connection to existing plumbing. Pumps up to 3060 gph at 0'. Approximate on level at 14", off level at 7". 1/3HP split capacitor motor - high efficiency- low Amp draw, corrosion resistant plastic, 10' grounded water proof power cord, pumps up to 48 gallons per minute, 2880 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female iron pipe discharge thread. One year warranty from Superior Pump Co. Durable thermoplastic resists corrosion.  Automatic operation, designed for minimum 14" sump basins.  Pumps up to  1320 GPH.  Dependable motor and float switch for automatic or manual operation.  1-1/4" discharge, and 8' power cord.  Self-cleaning screen - reduces maintenance.  CSA certified.
Automatic submersible sump pump. Ideal for use in basins 14" diameter or greater with light water removal needs. Reinforced thermoplastic pump housing and base are corrosion and rust resistant. Tethered float switch provides reliable automatic operation. 2900 GPH. For household use. 3/4" chrome-plated bronze suction.Heavy-duty plated bronze volute for durability. Removes water down to 1/8" of surface when water suction attachment is connected. Includes 6' suction hose, suction attachment and replacement parts kit. Pumps up to 340 gph at 0'. Noryl construction economical submersible sump pump. 1 1/2" npt discharge with 1 1/4" reducer. noryl impeller. tether float switch, Thermal and overload protection, 9' grounded electric cable, oil cooled motor for a better perormance. 1/3 hp motor, 115v. Capacity: 3000 gph/5' 2500 gph/10' 2000 gph/15' 1450 gph/18'. The most economical submersible protection for basement liable to flooding. recommended for a permanent residential installation.
1/3HP split capacitor motor - high efficiency - low Amp draw, rugged cast iron construction, 10' grounded water proof power cord, pumps up to 46 gallons per minute, 2760 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female iron pipe discharge thread. Stainless steel impeller. Three year warranty from Superior Pump Co. 1/3HP split capacitor motor - high efficiency - low Amp draw, corrosion resistant plastic, 10' grounded waterproof power cord, pumps up to 48 gallons per minute, 2880 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy  back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female iron pipe discharge thread. One year warranty from Superior Pump Co. For use with sump basins 12" or larger. Cast iron base, metal switch arm, 1-1/2" discharge, stainless steel drive shaft, impeller and float ball. Will handle liquids up to 180 degrees F. 2.76 amps, 10' cord. Three year warranty from Superior Pump.
Heavy-duty plated bronze volute for durability. Connects to 12 volt battery with on/off switch. Removes water down to 1/8" of surface when water suction attachment is connected. Includes 6' suction hose, suction attachment and replacement parts kit. Pumps up to 350 gph at 0'. Durable thermoplastic construction for corrosion resistance.  Efficient motor with automatic thermal overload protection.  Automatic tethered switch designed for minimum 14" diameter sump basin.  Pumps up to 2880 GPH.  1-1/4" or 1-1/2" discharge and 8' grounded power cord.   CSA certified. Durable thermoplastic resists corrosion.  Automatic operation, designed for minimum 14" sump basins. Pumps up to  2160 GPH.  Powerful motor with automatic thermal overload protection.  1-1/4" discharge, and 8' power cord.  Self-cleaning screen - reduces maintenance.  CSA certified.
1/3HP split capacitor motor - high efficiency - low draw, rugged cast iron construction, 10' grounded water proof power cord, pumps up to 46 gallons per minute, 2760 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female pipe discharge thread. Stainless steel impeller. Three year warranty from Superior Pump Co. 1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, corrosion resistant plastic, 10' grounded waterproof power cord, pumps up to 55 gallons per minute, 3300 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2 female iron pipe discharge thread. Stainless steel impeller. Three year warranty from Superior Pump Co. Rugged and treated cast iron construction submersible sump pump. 1 1/2" npt discharge with 1-1/4" reducer, noryl impeller,  piggyback tether float switch, easy to adjust.thermal and overload protection, 9' grounded electric cable, 1/3 hp oil cooled motor, Recommended for a permanent residential installation, up to 20 feet of head, and for a continuous use.17.6 lbs (8 kg)
Polypropylene and noryl construction economical submersible sump pump. 1-1/2" npt discharge with 1 1/4" reducer. Noryl impeller, independent piggyback tether float switch, thermal and overload protection, 9' grounded electric cable, oil free motor, environmentally safe, no danger to pollute your water. Water cooled continuous duty motor 1/2 hp 115v. Capacity: 3200 gph/5'' 2850 gph/10' 2300 gph/15' 1600 gph/20'1000 gph/22'. Recommended for a permanent residential installation and a continuous use when it is mandatory to evacuate a large flow from basement liable to flooding. may also be temporarily installed to drain pool, etc. Durable thermoplastic construction for corrosion resistance.  Heavy-duty motor with automatic thermal overload protection.  Automatic tethered switch designed for minimum 14" diameter sump basin. 1/3 HP Pumps up to 3150 GPH. 1/2 HP pumps up to 3630 GPH.  1-1/4" or 1-1/2" discharge and 8' grounded power cord.  Piggy-back style switch for automatic or manual operation.  CSA certified. Mechanical float switch. Overload protection to keep the motor from over-heating. Top suction and removable screen to filter out foreign particles. Epoxy-coated, corrosion-resistant aluminum housing dissipates heat to keep motor running cool. Thermoplastic volute and top assembly will not rust or corrode. Permanently lubricated ball bearing never needs oiling. Unitized shaft seal protects motor and wiring from moisture damage. Easy to install. U.L. Listed. 14" minimum sump diameter;13" on-level; 7" off-level. 1-1/2" NPTdischarge. Pumps up to 3600 gph at 0'.
1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, rugged cast iron construction, 10' grounded waterproof power cord, pumps up to 70 gallons per minute, 4200 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 1/2" solids, 1-1/2" female iron pipe discharge thread. Three year warranty from Superior Pump Co. Durable thermoplastic resists corrosion.  Automatic operation, designed for minimum 11" sump basins.  Pumps up to 2160 GPH.  Powerful motor with automatic thermal overload protection.  1-1/4" discharge, and 8' power cord.  Self-cleaning screen - reduces maintenance.  CSA certified. Full capacity with float switch for small sump basins. Thermoplastic volute and top assembly will not rust or corrode. Overload protection keeps motor from over-heating. Permanently lubricated ball bearing never needs oiling. Epoxy-coated, corrosion resistant aluminum housing dissipates heat to keep motor running cool. Unitized shaft seal for long life. Top suction and removable screen keeps the pump from clogging. Easy to install. U.L. Listed. 11" minimum sump diameter; 9" on-level; 4" off-level. 1-1/2" NPT discharge.  Pumps up to 3600 gph at 0'.
Automatic submersible sump pump.  Maximum pumping capacity to 2580 GPH.  Rugged thermoplastic body resists corrosion, impact, stress, and heat.  Tethered float switch designed for minimum 12" diameter sump basin.  1-1/4" or 1-1/2" NPT discharge, coupling included.  Easy installation, replaced pedestal or submersible sump pumps.  CSA certified. Rugged cast iron construction, 3/4" NPT suction and discharge, 10' power cord, Built-in carrying handle. Includes: brass garden hose adapters, suction strainer & an additional set of motor brushes. Uses: drain water heaters, fill radiant heating systems, as a pressure booster, water transfer. Not recommended for use as a sprinkler pump. Thermally protected, heavy-duty air cooled motor prevents overheating. Adjustable on-off cycle allows changes in the operating cycle to fit the application. Two pole switch for positive on-off action. Glass reinforced thermoplastic impeller, thermoplastic column and stainless steel fasteners are corrosion resistant for long life. Easy to install. UL Listed. 14" minimum sump diameter; on-off levels adjustable. 1-1/2" discharge. Pumps up to 4400 gph at 0'.
Durable thermoplastic construction for corrosion resistance.  Heavy-duty motor with automatic thermal overload protection.  Automatic tethered switch designed for minimum 14" diameter sump basin. 1/3 HP Pumps up to 3150 GPH. 1/2 HP pumps up to 3630 GPH.  1-1/4" or 1-1/2" discharge and 8' grounded power cord.  Piggy-back style switch for automatic or manual operation.  CSA certified. Cast iron pump housing for long life and quiet operation. Compactly designed for small sump pits. Two pole mechanical float switch provides on-off action for many years of safe, reliable service. Overload protection keeps motor from over-heating. Permanently lubricated ball bearing never needs oiling. Unitized shaft seal for long life. Top suction strainer stops foreign particles before they can clog the pump. Thermoplastic top assembly will not rust or corrode. Easy to install. 11" minimum sump diameter; 9" on-level; 4" off-level. 1-1/2"NPT discharge. PUmps up to 3800 gph at 0'. Thermoplastic construction, continuous duty, thermally protected, split capacitor motor, will lift water up to 25' of vertical height,1-1/2 discharge, 4.1 amps, 10' cord. 3/8" solids handling, pump is mounted to base to prevent clogging and switch malfunction. Vertical float switch, pre-plumbed with check valve and discharge pipe. 1 year warranty from Superior Pipe.
Adjustable on-off cycle allows homeowners to change the operating cycle to fit their application. Two pole switch provides positive on-off action for years of service. Overload protection to keep the motor from over-heating. Top suction strainer filters out debris before it can clog the pump. Open style impeller moves foreign particles through the pump without clogging. Stainless steel stub shaft or sleeve rotates in a bronze bushing for long life. Easy to install. UL listed. Two year warranty. on-off levels adjustable. 1-1/2" NPT discharge. Pumps up to 4080 gph at 0'. Designed for 14" diameter or larger basins. Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10" sump diameter. 1/3 HP pumps up to 4380 GPH. 1/2 HP pumps up to 4680 GPH. 3/4 HP pumps up to 5150 GPH. 10' grounded power cord. 1-1/2" NPT discharge. CSA Certified. Compact size. Mechanical float switch allows installation in sump pits as small as 11" diameter. Glass reinforced thermoplastic pump housing will not rust or corrode. Heavy duty oil-filled motor is thermally protected. Glass reinforced poly-carbonate impeller is designed for years of use. Top suction strainer filters debris. Stainless steel fasteners for corrosion-resistance. High capacity 1-1/2" NPT discharge. on level at 9", off level at 4". Pumps up to 3900 gph at 0'.
Handles up to 1/2" solids, clog resistant discharge, heavy-duty integrated vertical switch, 3360 gph maximum capacity, 1-1/2" NPT discharge pipe, 10' cord. Cast iron pump volute for long life and quiet operation. Designed for small sump pits. Mechanical float switch provides positive on-off action for many years of safe, reliable service. Overload protection keeps motor from overheating. Unitized seal for long life. Top suction strainer stops foreign particles before clogging the pump. Thermoplastic top assembly will not rust or corrode. Minimum sump diameter 11"; on level,  at 9" off-level at 4". U.L. Listed.1-1/2" NPT discharge and reinforced thermoplastic base. Continuous duty thermally protected split capacitor motor, lifts water up to 25' of vertical height, cast iron construction, 1-1/2" discharge, 7.6 amp, 10' cord. Vertical float switch, side discharge, three year warranty, pumps up to 70 gallons per minute, 4200 gallons per hour.
1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, rugged cast iron construction, 10' grounded waterproof power cord, pumps up to 80 gallons per minute, 4800 gallons per hour, bottom intake provides for clog resistant suction, clog-free metal vortex impeller, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 2" solids, 2" female iron pipe discharge thread. Cast aluminum, non-clogging vortex impeller. One year warranty from Superior Pump Co. Pumps up to 4680 GPH at 5', Cast iron motor and pump housing, replaceable piggyback tether float switch for automatic operation, 2" NPT discharge capable of handling 2" solids, upper ball bearing for quiet operation and long life. Ideal for basement or below grade installations. Designed for 18" diameter or larger basins. Rugged stainless steel and cast iron construction.  Heavy-duty high efficiency motor.  Piggy-back style switch for automatic or manual operation, for minimum 10" sump diameter.  Pumps up to 4380 GPH.  10' grounded power cord.  1-1/2" NPT discharge. CSA Certified.
Oil-cooled motor 1/2 HP continuous duty, with automatic thermal overload protection. Pump body made of cast iron and stainless steel. High flow rated, 1-1/2" NPT discharge with 1-1/4" reducer included. Noryl vortex impeller, clog free type (non-corrosive), automatic vertical float switch USA made, independent and adjustable, 9' grounded power cord, piggyback type. Up to 4400 US GPH capacity. Designed for a permanent installation and a maximum lift of 25? for light commercial and residential sump application. Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 14" sump diameter. Pumps up to 4680 GPH. 10' grounded power cord. 1-1/2" NPT discharge. CSA Certified. Corrosion resistant zinc construction, dissipates heat quickly and extends motor life, unibody motor housing eliminates leak points, stainless steel fasteners, quadra seal technology provides superior motor protection, smooth flow hydraulics delivers superior performance, vertical float switch operates in a 10? or larger sump basin, pumps up to 6660 gph  maximum lift of 29?.
Mechanical float switch.  Battery charger to keep battery properly charged. Alarm system to let homeowner know the standby system has activated. Battery case to protect the battery. Battery reverse signal to ensure the battery is installed correctly. Works with most brands of pedestal and submersible sump pumps. Built-in check valve keeps water from returning to sump basin. Works off a deep cycle marine battery. One year warranty. Pumps up to 1750 gph at 0'. Designed for basements with frequent water problems. Corrosion resistant stainless steel motor housing and fasteners. Cast iron body for long life. 115 volt, 60 cycle, single phase motor with overload protection. Vertical float switch for installation in sump basins 11" in diameter or larger. Thermally protected motor prevents overheating. Reinforced polycarbonate impeller. Top suction screen. High capacity 1-1/2" NPT discharge. on level at 9", off level at 4". Pumps up to 4600 gph at 0'. Continuous duty, thermally protected - split capacitor motor, lifts water up to 25' vertical height, rugged stainless steel and cast iron construction, 2" discharge for high capacity pumping, 1-1/2" NPT adapter included, clog resistant thermoplastic vortex impeller. Can be used as a utility pump by removing the float switch. Pumps up to 80 gpm - 4800 gph, handles 1/2" solids, 3 year warranty from Superior Pumpl.
Vertical switch, 115V, 10' cord, CSA and CUS listed, energy-efficient PSC motor, rust-proof impeller, 1-1/2" FNPT discharge pipe, 3/8" maximum solid handling. 12V DC pump with tethered float switch and mounting hardware, alarm/control unit with fuse and mute feature, thermoplastic battery box, 2 amp AC charger with 10? power cord. 1-1/4" or 1-1/2" discharge size. Battery sold separately. Cast iron submersible sewage pump. 2" discharge and 2" handling capabilities, independent piggyback  tether float switch, 15a. vortex design impeller, made from glass filled noryl, standard mechanical seal made from stainless steel, thermal and overload protection, SJTW 9' cable, with piggy-back, 4/10 hp motor, 115v, oil cooled. Capacity: 3600 gph/5', 3060 gph/10', 1260 gph/15'. Recommended for a permanent residential application, where the total head requirements do not exceed 15'. 24 lbs (10.91 kg)
Vertical switch, 115V, 10' cord, CSA and CUS listed, energy-efficient PSC motor, rust-proof impeller, 1-1/2" FNPT discharge pipe, 3/8" maximum solid handling. 12V. Prevents expensive water damage in case of power outage or primary sump pump failure. Automatic start-stop cycle. Included: switch, wires and pump, battery box and charger, fittings and check valve. Designed for residential and light commercial sewage applications. Ideal for basement or below grade installations. Maximum pumping capacity of 7680 GPH. Cast Iron motor and pump housing. Automatic operation with replaceable piggyback tether float switch. 2" discharge and capable of handling 2" NPT solids. Designed for 18" diameter or larger basins.
System requires a 12-volt battery. Sealed Lead Acid (SLA), deep cycle marine, or automotive style batteries can be used. A tether switch is included in the system and will automatically start the pump when power or the main pump fails. Removes up to 2880 gallons per hour. 40 VA charger maintains battery with computer controlled 2-step charge for improved charging performance. Audible alarm alerts homeowner that the back-up system is operating. LED on control box indicates battery condition. Includes tethered float switch. Pumps up to 3300 gph at 0'. Automatic submersible sewage pump made from rugged cast-iron to maximize pump life. Heavy-duty motor with overload protection provides safe operation. Maximum pumping capacity to 9000 GPH. 2" NPT discharge and 10' power cord.  Requires 18" minimum diameter sewage basin. CSA certified. 115V, 10' cord, CSA and CUS listed, 170 gpm capacity, energy-efficient PSC motor, rust-proof impeller, 2" NPT discharge pipe, 2" maximum solid handling.
High-flow battery back-up pumps up to 1750 GPH. Primary pump features: epoxy-coated cast iron construction offers years of reliable, trouble-free operation, oil-filled, thermally protected motor prevents overheating, reinforced poly-carbonate impeller, top suction screen filters debris. Battery back-up features: corrosion-resistant thermoplastic construction and float switch for automatic operation. Requires one 40 amp or 75 amp deep cycle battery, battery charger keeps battery properly charged, alarm system lets homeowner know standby system is active. 9" on lever, off level at 4".Battery case included. Includes 2 heavy duty check valves. 1/3 hp primary pump pumps up to 3800 gph at0'. Primary pump 92341 features: 1/3 HP 120 volt 4.1 amp AC motor, tough cast iron construction, 1-1/2" NPT discharge, vertical float switch, 10' power cord, clog resistant stainless steel impeller. Battery pump features: 12 volt DC pump, tough thermoplastic construction, 1-1/4" or 1-1/2" NPT discharge, vertical float switch, clog resistant impeller. Battery backup kit features:  87 decibel alarm with mute, electronic control panel with indicator lights and fuse, thermoplastic battery box, 2 amp AC charger with power cord, battery terminals and two universal check valves included. 12 Volt deep cycle battery sold separately.
   
 
1