Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL)
Choose a sub category:
WELL & JET PUMPS PUMP TANKS WELL & JET PUMP ACCESSORIES
PITCHER PUMPS / ACCESSORIES PRESSURE SWITCHES PRESSURE GAUGES
PRESSURE REGULATING VALVES AIR VOLUME CONTROLS WELL PUMP REPAIR PARTS
Sort By:
1 2
Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4" to 6" casing. Easy to use, snap-in wire guide; with split circle wire hole. Suitable for air, steam or water. Easy to read dial face. Steel case with glass face, accurate reading guaranteed. Brass socket connection. Suitable for air, steam or water. Easy to read dial face. Steel case with glass face, accurate reading guaranteed. Brass socket connection.
Wire sizes 3-wire 10-12-14.  Sleeve size 3/8" x 3". Waterproof impregnated lower valve for regular service. For all charging applications. For use with conventional tanks.
Compression sleeve for 3 wire.  Wire sizes for 3 wire 10-12-14 submersible cable. Lead free, steel case, brass mount, 1/8" C.B.M connection. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
For all charging applications. For use with conventional tanks. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Reduces O.D. to allow for greater waterway. Entire coupling galvanized. Fits 1" or 1-1/4" Drop Pipe, Fits 4" to 8" well casing. Supplied with 2 stainless steel clamps.
Waterproof impregnated lower valve for regular service. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation. Cast brass finish. Pressure only relief valve. Factory preset at 75 psi.
1" insert rope adapter. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed.
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Individually boxed. Air compressor pressure switch suitable for small electrically driven air compressors, set for Off at 100 PSI. Contacts open on rising pressure.  2 Pole, NEMA 1 enclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Individially boxed. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Individually boxed.
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified.  Clam shell packaging. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified.  Clam shell packaging. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Individually boxed.
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Individually boxed. A53 galvanized grade B hot roll electric weld. Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45: Part No. 15770, 80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: Part No. 15770, 120 Maximum Tank Gallons, 3/8'' FIP. No. 15679: Part No. 15679, 42 Maximum Tank Gallons, 1/4'' FIP.
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45: Part No. 15770, 80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: Part No. 15770, 120 Maximum Tank Gallons, 3/8'' FIP. No. 15679: Part No. 15679, 42 Maximum Tank Gallons, 1/4'' FIP. Water pump pressure switch with 30  - 50 psi cut in/cut out.  Suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes a maintained manual cut-out lever allowing the pump to run on auto or to be turned off. Individially boxed.
For No.22368A pump. Complete with rod. Water pump pressure switch with 30  - 50 psi cut in/cut out.  Suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Individially boxed.
Water pump pressure switch with 20  - 40 psi cut in/cut out.  Suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Individially boxed. For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded. For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded.
Maintains proper relation of volume of air and quantity of water in the pressure tank. Body threaded for 1-1/4" tank connection. 1/4" tap for pressure gauge. Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA 1 enclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Individially boxed. Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA 1 enclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Individially boxed.
Includes: 1/4" compression fitting for plastic tube, nipple, air volume control and instruction sheet. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed.
Compact iron-body pressure reducing and regulating valve designed for installations where small size and economy are important, and where local codes allow the use of iron body regulators for water service. Intended for use where supply line inlet pressure does not exceed 300 psi. Suitable for either cold or hot water service. Ideal for domestic installations, it automatically reduces and regulates inlet pressure down to the standard factory setting of 45 psi. Features inbuilt back-pass check and fully pressure-balanced piston. Maintains proper relation of volume of air and quantity of water in the pressure tank. Body threaded for 1-1/4" tank connection. 1/4" tap for pressure gauge. Heavy duty cast iron, 5 bolt construction, 1/4" grounding lug, 9/16" screened vent, non toxic lead free paint, 1" NPT conduit connection. Casing ID.: 6" & 6-1/4"
Float Switch designed for use in open tank or sump pump applications.   Reverse action contacts open on liquid rise. 2 pole, NEMA 1 enclosure, bracket mounted, Screw clamp terminals, UL/CSA Listed, RoHS compliant, contacts open on liquid rise. Individially boxed. 1" x 10" long tank cross, silicon bronze fabricated with copper pipe and male fitting, one 1/2" female tap in top of cross, 3/4" FIP x 1"MIP tapping on each leg. Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. 3/4" hex connection.
Tank leg length 10", female tapping each leg 3/4", male tapping each leg 1", female tapping top of cross both 1/2", two female tappings  on side 1/4". Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge. NPT threaded female union inlet x NPT female outlet. Compact, versatile, bronze body construction, with built-in strainer and bypass. For residential and light-duty commercial water pressure regulating. Integral stainless steel strainer, removable when bottom plug is removed. Replaceable seat module, serviceable inline. 33 to 180 degrees Fahrenheit temperature range. 400 psi max working pressure. 50 psi standard reducing pressure, adjustable 25 to 75 psi. Bypass feature controls thermal expansion pressure until inlet pressure is above 150 psi. Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); IAPMO Listed.
Half-cartridge based pressure reducing and regulating valve with bronze body. Assembled using the double union nuts with the special sharkbite fittings. Sharkbite fittings can be used on copper, PEX and CPVC. Supplied by factory with a standard delivery setting of 45 psi. Can be adjusted fro 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 200 psi. Suited for either cold or hot water service. Features compact pressure reducing and regulating valves, Certified by ASSE Standard1003, Listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge, Instant push-fit connections. Factory pre-charged to 20 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for small water systems and lower-flow applications. NSF-61 approved. Non-replaceable diaphragm. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed.
   
 
1 2