Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > PRESSURE REGULATING VALVES
Sort By:
1
Cast brass finish. Pressure only relief valve. Factory preset at 75 psi. Compact iron-body pressure reducing and regulating valve designed for installations where small size and economy are important, and where local codes allow the use of iron body regulators for water service. Intended for use where supply line inlet pressure does not exceed 300 psi. Suitable for either cold or hot water service. Ideal for domestic installations, it automatically reduces and regulates inlet pressure down to the standard factory setting of 45 psi. Features inbuilt back-pass check and fully pressure-balanced piston. Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge.
NPT threaded female union inlet x NPT female outlet. Compact, versatile, bronze body construction, with built-in strainer and bypass. For residential and light-duty commercial water pressure regulating. Integral stainless steel strainer, removable when bottom plug is removed. Replaceable seat module, serviceable inline. 33 to 180 degrees Fahrenheit temperature range. 400 psi max working pressure. 50 psi standard reducing pressure, adjustable 25 to 75 psi. Bypass feature controls thermal expansion pressure until inlet pressure is above 150 psi. Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); IAPMO Listed. Half-cartridge based pressure reducing and regulating valve with bronze body. Assembled using the double union nuts with the special sharkbite fittings. Sharkbite fittings can be used on copper, PEX and CPVC. Supplied by factory with a standard delivery setting of 45 psi. Can be adjusted fro 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 200 psi. Suited for either cold or hot water service. Features compact pressure reducing and regulating valves, Certified by ASSE Standard1003, Listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge, Instant push-fit connections. Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge.
Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge. Stainless steel body, orange twist-cap eliminates need for wrench adjustment, numerical indicator show pressure without the need of a gauge, single piece cartridge can be removed with valve body remaining in place, Outlet pressure range: 20-90 psi, Maximum temperature: 180 degrees F., Maximum initial pressure: 300 psi.
   
 
1