Home > LAWN & GARDEN > LAWN & GARDEN TOOLS > SLEDGES, AXES & MAULS > LOGGING TOOLS
Sort By:
1
Ergonomically designed for tasks within a high production mill environment. Drop forged steel with ground precision points.  Heads are secured to handle by a spring steel 1/4" x 1-1/4" roll pin. Heads are painted black, handles are clear lacquer finished. Replacement head No.12392; replacement handle No.12221. Easily converts into a Cant hook by removing the lifting brace. Duckbill hook 7/16" x 7/8" x 8" drop forged steel. Ideal for log sizes 3 to 12 inches. Replacement handle No.06239. Duckbill hooks are drop forged high carbon steel with the bill ground to a fine point. Features a drawn carbon steel socket, and a pick forged from high carbon steel before being driven into handle. Socket held securely in place with special retaining tab forged into pick. Heads are painted, handles are clear lacquer finished. No.00120 for log sizes 6" to 16"; replacement handle No.00122. No.00240 for log sizes 6" to 16"; replacement handle No.00242. No.00260 for log sizes 8" to 24"; replacement handle No.00262 NOTE: Not to be used as a wedge or prybar. Load must be applied in direction of handle brand mark. Flexing handle in a perpendicular direction of grain may cause handle fracture and result in personal injury.
Forged from round steel to position additional steel at critical stress areas. Points are fine ground to assure long lasting sharpness. Tongs are supported by special tong shut. Specially shaped to grab and hold poles and logs for skidding and dragging operations, not for lifting. Painted blue. Forged from round steel to position additional steel at critical stress areas. Points are fine ground to assure long lasting sharpness. Tongs 3/4" and 1" are supported by special tong shut; tongs 1-1/4" use screw pin anchor shackles. Specially shaped to grab and hold poles and logs for skidding and dragging operations, not for lifting. Painted blue. NOTE: Designed for pulling or dragging. Skidding tongs are not load rated and should not be used for overhead lifting. Do not heat points to sharpen them. 7/16" x 7/8" duckbill hooks are drop forged with the bills ground to a fine point. Clasps and extension toe rings are ductile iron castings for long lasting service. Heads are painted; handles are clear lacquered finished. For log sizes 6" to 16" long. No.06110 replacement handle 3.0 pound Nos.06112., 06120 replacement handle 3.5 pound Nos.06122., 06130 replacement handle 3.8 pounds No.06132. No.06140 replacement handle 4.0 pounds No. 06142. NOTE: Not to be used as a wedge or pry bar. Load must be applied in direction of handle brand mark. Flexing handle in a perpendicular direction of grain may cause handle fraction and result in personal injury.
7/16" x 7/8" duckbill hooks are drop forged with the bills ground to a fine point. Clasps and extension toe rings are ductile iron castings for long lasting service. Heads are painted; handles are clear lacquered finished. For log sizes 6" to 16" long. No.06110 replacement handle 3.0 pound Nos.06112., 06120 replacement handle 3.5 pound Nos.06122., 06130 replacement handle 3.8 pounds No.06132. No.06140 replacement handle 4.0 pounds No. 06142. NOTE: Not to be used as a wedge or pry bar. Load must be applied in direction of handle brand mark. Flexing handle in a perpendicular direction of grain may cause handle fraction and result in personal injury. Duckbill hooks are drop forged high carbon steel with the bill ground to a fine point. Features a drawn carbon steel socket, and a pick forged from high carbon steel before being driven into handle. Socket held securely in place with special retaining tab forged into pick. Heads are painted, handles are clear lacquer finished. No.00120 for log sizes 6" to 16"; replacement handle No.00122. No.00240 for log sizes 6" to 16"; replacement handle No.00242. No.00260 for log sizes 8" to 24"; replacement handle No.00262 NOTE: Not to be used as a wedge or prybar. Load must be applied in direction of handle brand mark. Flexing handle in a perpendicular direction of grain may cause handle fracture and result in personal injury. 7/16" x 7/8" duckbill hooks are drop forged with the bills ground to a fine point. Clasps and extension toe rings are ductile iron castings for long lasting service. Heads are painted; handles are clear lacquered finished. For log sizes 6" to 16" long. No.06110 replacement handle 3.0 pound Nos.06112., 06120 replacement handle 3.5 pound Nos.06122., 06130 replacement handle 3.8 pounds No.06132. No.06140 replacement handle 4.0 pounds No. 06142. NOTE: Not to be used as a wedge or pry bar. Load must be applied in direction of handle brand mark. Flexing handle in a perpendicular direction of grain may cause handle fraction and result in personal injury.
Forged from round steel to position additional steel at critical stress areas. Points are fine ground to assure long lasting sharpness. Tongs are supported by special tong shut. Specially shaped to grab and hold poles and logs for skidding and dragging operations, not for lifting. Painted blue. Forged from round steel to position additional steel at critical stress areas. Points are fine ground to assure long lasting sharpness. Tongs 3/4" and 1" are supported by special tong shut; tongs 1-1/4" use screw pin anchor shackles. Specially shaped to grab and hold poles and logs for skidding and dragging operations, not for lifting. Painted blue. NOTE: Designed for pulling or dragging. Skidding tongs are not load rated and should not be used for overhead lifting. Do not heat points to sharpen them. Forged from round steel to position additional steel at critical stress areas. Points are fine ground to assure long lasting sharpness. Tongs 3/4" and 1" are supported by special tong shut; tongs 1-1/4" use screw pin anchor shackles. Specially shaped to grab and hold poles and logs for skidding and dragging operations, not for lifting. Painted blue. NOTE: Designed for pulling or dragging. Skidding tongs are not load rated and should not be used for overhead lifting. Do not heat points to sharpen them.
Forged from round steel to position additional steel at critical stress areas. Points are fine ground to assure long lasting sharpness. Tongs 3/4" and 1" are supported by special tong shut; tongs 1-1/4" use screw pin anchor shackles. Specially shaped to grab and hold poles and logs for skidding and dragging operations, not for lifting. Painted blue. NOTE: Designed for pulling or dragging. Skidding tongs are not load rated and should not be used for overhead lifting. Do not heat points to sharpen them.
   
 
1