Home > LAWN & GARDEN > LANDSCAPE FENCING/FARM FENCING > FENCING > ELECTRIC FENCE ACCESSORIES
Sort By:
1 2
Small screw-in insulator. Molded of tough, high quality plastic with shockproof thickness for safe handling protection. For splicing polytape up to 1/2" wide. Allows for fast, secure joining of polytape rolls. Connects one polytape to another without losing juice.
Large screw-in insulator. Made of virgin, high impact polyethylene. To be used with lightweight smooth wire or Red Snap'r electric fence wire (install after insulator is attached to post). Fastener snaps open and shut for easier wire installation. For splicing together 1/4" polyrope. Allows for fast, secure joining of polyrope. Can also be used to make electrical connections between fence lines and the fence charger.
Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene. One-piece molded. Floats on a compression spring assembly. All the tension rests on the rugged steel assembly. Connects 1" polytape to the end insulators to reach all of your fence posts.
Anchoring gate handles. This insulated anchor is to be used in conjunction with the gate handle. The screw-in design type is for wood gate posts. Use with fence wire and polyrope. Insulates against shock. For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible.  Connects the polytape to the energizer.
For firmly securing an electrified wire to corner posts without losing energy through the post. Formed of thick, tough plastic. Can withstand the strain of wire at corner of electrified fence. For 9-22 gauge high-tensile steel wire and aluminum wire, all polywire (regular and heavy duty), and polyrope up to 1/4" in diameter. Can use on chain link fence. Made of virgin, high impact polyethylene. Designed for quick, easy installation. For use with heavy gauge wire and barbed wire. Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire.
Compression spring assembly will keep tension on wire but spring will never wear out. Large wire hook is designed to straighten out if livestock should run through gate. Hook can then be bent back. Bright yellow shields for high visibility and easy recognition. Withstands cold weather. Model clips hold electric fence wire and polytape (up to 2" wide). Molded of reinforced polypropylene with a heavy-duty steel stake. Extra reinforcing ribs for strength. Features large step-in flange and anti-rotation spike to keep stake from turning. Includes 8 wire holders. Heavy duty fence post keeps your property protected. Molded clips to hold electric fence wire and poly tape (up to 2" wide. Each 4' post molded from reinforced polypropylene with a heavy-duty steel stake.
Connects 1/2" polytape to another without losing power so you can reach distant electric fence posts. Use at the ends of polytape for dead-ending or gate handle connections. Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel. Black letters on a yellow polypropylene background. Two holes for fastening to fence wire or nailing to wood post. 3 signs. "Warning! Electric Fence" printed in English, French and Spanish languages.
5IN GALV BRACE PIN
Our Price: $2.66
Connects 2" polytape to the end insulators to reach all of your fence posts. Super tough fiberglass reinforced electric fence post. Unique step-in design with adjustable insulators that can be used with Baygard wire, Bayshock wire or Baygard HV tape. Designed for improved strength. Complete with 4 versatile insulators that can accept wire, tape and rope. Weather resistant. Non conductive and lightweight. Used with 6" x 8' posts in each single or double brace assembly. Made of 3/8" carbon steel rods and galvanized.
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25. For connecting strands of polytape. Simplifies electrical connections between strands of polytape. Stainless steel plate holds the tape securely and will not corrode. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist.
For insulating corner wood posts that have polytape. Made for all poly tape widths up to 2". For standard T-posts (1.25 and 1.33). Use at corners, ends or T-junctions. Fully insulated. All metal parts are stainless steel. Molded of high density polyethylene with UV inhibitors. Two holes in top for fastening to fence wire, or for nailing to wood post. Weighs 0.04 pounds each. For anchoring gate handles. This insulated anchor is to be used in conjunction with the fence gate handle. The screw-in design is for T-post gate posts.
Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist. Designed to fit steel or 1.25 and 1.33 t-posts. Unbreakable snap-on mounts allow quick and easy installation. Use with all fence wire and poly rope. Two shields prevent arcing from wire to post. Ultraviolet stabilizers resist weathering. Not for use with poly tape or high tensile. Checks current in electric fence with a one-light application. Has a plastic case with 42'' of plastic coated cord.
Galvanized clip for poly and wood spacers. Use with 3-hole twisting tool No.300.309 (SKU 573-8687) to attach spacer tightly to high tensile wire. Made of virgin, high impact polyethylene. Fastens to post with nail, J-bolt or any type of fastener. Raised boss for easy removal of nail with claw hammer. Checks current in electric fence with a one-light application. Has a plastic case with 42" of plastic coated cord.
Insulating grip is soft and flexible with safety flanges for extra shock protection. Unique fastening plate ensures a secure wire connection. Will not break, crack, or chip. Steel components are plated to resist rust. For insulating corners, ends or T junctions of T-posts that have polytape. For all polytape widths up to 2" or standard T-posts (1.25 and 1.33). Molded of white high density polyethylene with UV inhibitors. Has same features as 5" pin but is used with 5" x 8' post in single brace and one each with 5" x 8' post and 4" x 8' post in double brace assembly. Made of 3/8" carbon steel rods and galvanized.
Use to insulate wooden corner posts or end posts along wire fences. Durable porcelain and can be used with a variety of wire types, including steel wire, aluminum wire, poly rope and poly tape (not for use with high tensile). For fastening electrified wire to wood  posts without losing energy through the post. Economical insulator with double-headed nail for wood posts. For 9 gauge thru 22 gauge high-tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter. For fastening electrified wire to wood posts without losing energy through the post. Extends wire 2-1/2" from wooden posts. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter. Comes with a double headed nail.
ELECTRIC TAP
Our Price: $3.93
Used to secure, by crimping, hot wire connections to existing wires. Also for use under gate electric transfer. Fits 12-1/2 to 16 gauge wire. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Provides long arcing distance protection from wire to post. Self-centering post cavity with spin-on nut will accommodate posts ranging from 1/4'' to 9/16'' diameter. For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post.
Made of high-density polyethylene, UV stabilized, notched every inch. Attach to wire with spacer clip. 49" long. Switch off selected electric wires on a fence, such as the lowest live wire when the grass is high, to prevent interference with the fence. 1/16 amp fuse used in model Nos.EAC5A-FS, SS-750RPX and EAC10M-FS (SS-550X).
High strain corner and end insulator. For firmly securing and electrified wire to corner or end posts without losing energy through the post. Made for high tensile, permanent or temporary electric fences. Can withstand the strain of wire at corner or ends of electrified fences. Made of hot rolled flat steel formed to fit the in-line strainer No.400-399. Durable paint finish to prevent rust. Used to indicate tension of wire. One inch of compression equals 150 pounds of pull. Use one in conjunction with in-line strainer for each leg of fence. Electroplated to deter rust.
For fastening electrified wire to posts without losing energy through the post. Screw-on insulators fits all posts 1/2" in diameter or smaller. Completely arc-proof. Designed for low impedance and standard duty fence controllers. Unbreakable polycarbonate 5,000 pound tensile strength vs 700 pound for porcelain. Will not chip, crack from stress, shortout or rust. Unique built-in wire channel keeps wire centered. Same size and dimension as porcelain corner. Use with any gauge wire or high tensile fences including barbed wire. U.V. protected to resist weathering. Large corner/end post insulator.
Fastens electrified wire to round or square post fence without losing energy through the post. Can be used on chain link fence. Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Unbreakable snap-on fastening attachment. Fits 1.25 and 1.33 t-posts. Dependable, strong, made from white vitreous porcelain and coated with a heavy glaze. 1-3/4'' diameter.
For use with up to 2" polytape, polywire, polyrope and steel/aluminum wire. Use to protect animals from sharp edged T-post tops. For use on 1.25 and 1.33 T-posts. For use with up to 2" polytape, polywire, polyrope and steel/aluminum wire. Use to protect animals from sharp edged T-post tops. For use on 1.25 and 1.33 T-posts. Made of virgin, high impact polyethylene. Maximum protection for horses, show cattle or any livestock from sharp, jagged T-Post top. Fits T-post 133's, 125's and 101's; also fits all size wood posts.
   
 
1 2