Home > LAWN & GARDEN > LANDSCAPE FENCING/FARM FENCING > POND SUPPLIES > POND PUMPS
Sort By:
1
Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Built-in flow control and bottom intake for low-level water intake. 2 feet maximum lift and discharge adapters for 1/2" or 3/8" I.D. tubing. 45 gallons per hour at 120V, 60Hz. 6' power cord. 1.2"H x 2"L x 1.7"W. U.L. Listed. Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Built-in flow control and bottom intake for low-level water intake. 3.5 feet maximum lift and discharge adapters for 1/2" or 3/8" I.D. tubing. 8 watts. 77 gallons per hour at 120V, 60Hz. 6' power cord. 2.3"H x 2.8"L x 1.9"W. U.L. Listed. Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Built-in flow control and bottom intake for low-level water intake. 5.5 feet maximum lift and discharge adapters for 1/2" or 5/8" I.D. tubing. 130 gallons per hour at 120V, 60Hz. 6' power cord. 11 watts. 3.20"H x 3.5"L x 2.80W. U.L. Listed.
Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Environmentally safe and oil-less. 6 feet maximum lift and 1/2" MNPT discharge. 300 gallons per hour at 120V, 60Hz and 6' power cord. 3.6"H x 3.70"L x 2.7"W. CULUS Listed. 7' maximum pumping height. 5/8" or 1/2'' barbed discharge. Built-in adjustable flow control valve. 33 watts. 15' cord. Designed to operate continuously with minimal energy consumption. Corrosion resistant body specifically for submersible use. Easy to install and maintain. Ideal for a variety of applications. Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Environmentally safe and oil-less. 7 feet maximum lift and 1/4" MNPT discharge. Pumps 170 gallons per hour at 36 watts, 115V, 60Hz and 15' power cord.
Ceramic shaft for longer life. 8' maximum pumping height. 3/4'' barbed discharge, 57 watts. 15' cord. Designed to operate continuously with minimal energy consumption. Corrosion-resistant body specifically for submersible use. Easy to install and maintain. Ideal for a variety of applications. 4'H x 5.3"L x 4.3"W. Encapsulated epoxy filled pumps, energy efficient, corrosion resistant plastic housing with compact design. Environmentally safe and oil-less.  12.2 feet maximum lift and 1/4" MNPT discharge. 300 gallons per hour at 115v, 60Hz, 47W, 1/40 H.P. and 15' power cord. U.L./CSA listed. Designed to operate continuously with minimal energy consumption. Corrosion-resistant body specifically for submersible use. Easy to install and maintain. Ideal for a variety of applications. 1'' barbed discharge. 11.75' maximum pumping height. Ceramic shaft for longer life. 160 watts. 15' cord. 4.4"H x 5.7"L x 4.3"W.
Encapsulated epoxy filled pumps, energy efficient, corrosion resistant plastic housing with compact design. Environmentally safe and oil-less.  13 feet maximum lift and 1/2" MNPT discharge. 475 gallons per hour at 115v, 60Hz, 80W, 1/28 H.P. and 15' power cord. U.L./CSA listed. These pumps utilize a permanent-split capacitor (PSC) motor sealed in stainless steel housing surrounded by a plastic case. PSC motor uses less energy than other pumps of similar flow capacity. The motor develops less heat, so does not require internal oil. Use for ponds up to 1200 gallons. Pumps 1900 gallons per hour at 115v, 60Hz, 230W, 1/8 H.P. 20' maximum lift and 1-1/4" FNPT discharge. Includes 1-1/4" MNPT x 1" barbed elbow and 16' power cord. U.L./C-CSA listed. Energy efficient. Ideal for large pond pumping jobs. Uses from 40 to 60 percent less energy than direct drive pumps. No seal, no oil. Versatile construction can be installed inline. 1-1/2'' input and output. FNPT discharge and MNPT intake. UL listed with a 14-1/2' max. head. 20' power cord.
Designed to operate continuously. Produces greater starting torque and more flow pressure. Ideal for use in filtration, waterfalls and streams, as well as operating two water features (statuary ornament and fountain nozzle) simultaneously. Use vertically or horizontally. 29' maximum pumping height. 1-1/4'' FNPT discharge. 1-1/4'' barbed adapter discharge. 700 watts. 16' cord. These pumps utilize a permanent-split capacitor (PSC) motor sealed in stainless steel housing surrounded by a plastic case. PSC motor uses less energy than other pumps of similar flow capacity. The motor develops less heat, so does not require internal oil. Use for ponds up to 2400 gallons. Pumps 4280 gallons per hour at 115v, 60Hz, 700W, 5/8 H.P. 30' maximum lift and 1-1/4" FNPT dual discharge continuous duty pump. Includes 1-1/4" MNPT x 1-1/4" barbed elbow and 16' power cord. U.L./C-CSA listed.
   
 
1