Home > LAWN & GARDEN > FARM SUPPLIES > FARM SUPPLIES > STOCK TANKS
Sort By:
1
1/4-20 male threads on both ends, 1/4" rod diameter. Corrosion resistant, lightweight and suitable for a broad range of destructive fluids. Suitable for 175 degrees Fahrenheit. For open tank service only. Orange for ultra-violet light protection. 1/4-20 spud connector, for 1/2'' and 3/4'' Robert or Flippen valves. Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint, and stem, threaded at one end. 1/4-20 thread on stem/thumb screw.
Brass with threads on both ends. Brass with threads on both ends. Highly corrosion resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 degrees F.
Highly corrosion resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 degrees F. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Outer housing molded of high impact resin. Withstands weather and abuse. Durable molded float. Two sets of brackets. Fits poly tanks and steel tanks. 300 GPH. Highly corrosion resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 degrees F.
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to, or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end. Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only. Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only.
Bronze body with MNPT threaded inlet and outlet. Cotter pin pivot arm assembly. Replaceable plungers. Stem fitting: 1/4-20. Maximum pressure 125 psi. Maximum temperature 180 degrees F. Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only. Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to, or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end.
Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Precision die cast outer housing. Durable molded float. Includes two sets of brackets. Fits poly tanks and steel tanks. 300 GPH. Installation instructions included. Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI.
STOCK TANK DRAIN PLUG
Our Price: $16.65
1-1/4'' through 2'' bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F. For stock tank Nos.4242 (SKU 635.6257), 4243 (SKU 635.5978), 4244 (617.6580), 4245 (SKU 635.6471) and 4247. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Precision die-cast, durable molded float and molded non-siphoning unit. Complies with basic anti-siphoning regulations. Has a replaceable non-siphoning unit. 300 GPH.
Fits all sizes Rubbermaid stock tanks. Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI. Heats the water, keeps open an ice-free area of approximately 30'' in diameter down to sub-zero temperatures. Thermostatically controlled to operate only when necessary. Heavy-duty float will not rust, corrode or leak. Special 10'' heating element. 6' heavy duty grounded wire. For use in METAL TANKS ONLY. Individually packed. 120 AC voltage, 1500 watts.
Thermostatically controlled to operate only when necessary. Designed to rest in the bottom of the tank unnoticed by livestock. Protective sturdy cage permits use in all tanks. Safe in plastic. Thermostatically controlled to operate only when necessary. Keeps tanks up to 250 gallons from completely freezing during winter. Uses less electricity than traditional 1500 watt de-icers. Can be used in metal, plastic or rubber stock tanks. U.L. Listed. 120 AC voltage; 1250 watts. Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gallons.
Designed to keep a small hole open to release harmful gasses. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operated only when necessary. For use in ponds of 50 to 600 gallons. Industry standard 10' supply cord. Fish and plant friendly. Safe in all ponds. Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gallons. Quick, easy installation. Unnoticed by livestock, no cord in water. Safe in all tanks. Fits all Behlen, Freeland, Hastings, Rubbermaid, Applegate and all other plastic and metal tanks on the market. Thermostatically controlled to operate only when necessary. 1500 watts.
1-1/4'' through 2'' bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F. 1-1/4'' through 2'' bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F.
   
 
1