Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > AUTOMOTIVE ELECTRICAL > LAMP ASSEMBLYS
Sort By:
1 2
Use on parking light, directional light and side marker light. 1-7/8" x 5', on a card. Use on parking light, directional light and side marker light. 1-7/8" x 5', on a card. Tough molded acrylic lens. Used to replace lenses of Peterson Nos.440, 441, 444, and 452 series lights. 4-1/2" square.
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4"W x 1" x 1-1/8"D, mounts on 2-3/4" centers. Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4"W x 1" x 1-1/8"D, mounts on 2-3/4" centers. Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers. For courtesy, interior or instrument lights; commonly used to illuminate license plate or step bumpers. Chrome plated steel housing snaps into 1-1/4" diameter holes. 1-1/2" diameter overall. 2 required for legal license illumination. Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light, and may be used as combination clearance and side marker when properly mounted on 3" centers and grounded through mounting hardware; single wire for electrical connection. 15,000-hour long life bulbs. 4" width x 2" height x 1-1/8" depth.
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000-hour long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers. Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light, and may be used as combination clearance and side marker when properly mounted on 3" centers and grounded through mounting hardware; single wire for electrical connection. 15,000-hour long life bulbs. 4" width x 2" height x 1-1/8" depth. Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000-hour long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
Use to repair red automotive lenses. 1.5" x 60", carded. Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick Lock" port to connect. Single wire for electrical connection. Features 15,000-hour long life bulb. 2-3/4"W x 2-1/8"H x 1"D. Mounts with two stainless steel screws on 2" centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16" width x 1-3/16" height x 1" depth.
Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8" projection; 2-3/4"W x 2"H bracket mounts on 2" centers. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. 2-3/4"W x 5/8"H x 3/4"D, mounts on 1-15/16" centers. 100,000-hour rated life. Made in USA. Sealed 2-diode LED light alternative to traditional incandescent 154-series lights. Operates from 9-16 volt. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16"L x 1-1/16"W x 15/16"D.
Sealed 2-diode LED light alternative to traditional incandescent 154-series lights. Operates from 9-16 volt. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16"L x 1-1/16"W x 15/16"D. Functions as clearance or side marker light. 2-wire, hard-wired design. Operates from 9-16 volts. Ground wire includes number 10 ring terminal. Mount using center stud or two mounting screws. 3-1/8" width x 2" height x 15/16". Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10" lead wires. Universal stud mount with 1/4" studs on 2" centers. 3-3/4"H x 2-5/8"D overall.
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10" lead wires. Universal stud mount with 1/4" studs on 2" centers. 3-3/4"H x 2-5/8"D overall. Durable black ABS housing with snap on lens functions as a stop, turn, and tail light. Interchangeable with similar competitive units. 2 lead wires exit through 1-9/16"H x 1/2" diameter hollow stud. 4-1/8" diameter, 2-3/8"D overall. Light functions as combination turn signal, parking light, or warning light. Durable, black ABS housing with two snap-on amber lenses. Two lead wires exit through 1/2" diameter hollow mounting stud. Grounds through mounting stud. Converts to single-face amber light by snapping on black back. 4-1/8" diameter x 2-3/8'' wide. Mounting stud is 1-9/16" long.
Under-80" wide combination tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, and side reflex. Includes lead wire. Grounds through 1/4" mounting studs.  5"W x 4-1/2"H x 2-7/8"D overall, studs on 2" centers. Sturdy plastic housing with a black finish. Brass socket and Lexide lens gasket for long life. 5-1/2" face diameter, 4-1/2" diameter inset, and 1-1/2"D overall. For light and medium duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3" centers. Includes both lead and ground wire for mounting to all surfaces.
For light and medium duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3" centers. Includes both lead and ground wire for mounting to all surfaces. Features polycarbonate lens, galvanized steel base plate, dual-filament bulb, and tough plastic guard to protect lead wires. 4-9/16"W x 2-1/2"H x 1-3/4"D, mounts on 3-1/2" x 1-1/2" centers. Durable, low-draw LED design. Requires two lights to meet DOT license light requirements when mounted to side of license plate. Also suitable for utility courtesy light applications. Hardwired leads.
Under-80" wide combination tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, and side reflex. Includes lead wire. Grounds through 1/4" mounting studs.  5"W x 4-1/2"H x 2-7/8"D overall, studs on 2" centers. Features durable Lexan lens and nylon push-button on/off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16"W x 1-3/4"H x 1-3/4"D, mounts on 3-1/2" x 1-1/2" centers. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. 4" width x 1-1/3" height x 15/16" depth. Made in USA.
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. 4" width x 1-1/3" height x 15/16" depth. Made in USA. Corrosion resistant, zinc plated, painted with white baked enamel. Three 3-1/4" x 1" x 1-1/8" No.107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to protect against being knocked out. Mounts on 16-1/2" centers and grounds through mounting hardware. 16-1/8"W x 1"H x 1-3/8"D, 16-1/2"L with mounting brackets. Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. 2-1/2" width x 1-1/4" height x 7/8" depth.
Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. 2-1/2" width x 1-1/4" height x 7/8" depth. Sealed, 4" round stop, turn, and tail light may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability. Features extra wide, spin-welded, tongue-and-groove lens lip and waterproof seal. High performance, copper alloy conductors eliminate the possibility of wire failure. State-of-the art bulb design features three supports for the minor filament and two supports for the major filament providing long bulb life. Wedge-base socket prevents premature bulb failure. Includes light, grommet and 431-491 straight plug. 4-1/4" Diameter. Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9-16 volt operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug.
Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9-16 volt operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug. Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9-16 volt operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug. Lexan housing and lens sonic welded for a permanent seal. Legal in either vertical or horizontal mounting position for U.S. and ECE applications. Includes No.421R light, No.421-18 grommet, and No.421-491 right angle, 3-wire plug with an added terminal for double filament bulbs. Interchangeable with all competitive units. 6-1/2"W x 2-1/4"H.
Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2" centers and includes mounting hardware. Light is  5-3/4"W x 4-1/2"H x 2-7/8"D. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2" centers and includes mounting hardware. Light is  5-3/4"W x 4-1/2"H x 2-7/8"D. Low-profile lamp functions as tractor or utility light with bright 55-watt, H3 replaceable bulb. Features high-impact polycarbonate housing and adjustable stainless steel mounting hardware. Light is 5-5/8" W x 2-7/8" H x 2-1/2" D. Overall height of  3-7/8".
LIGHT STOP 4IN ROUND LED
Our Price: $12.07
Features three 1/4" mounting studs on 2" triangular pattern. Includes stop, turn, tail, back-up and license light functions. Will fit Peterbilt, Mack, White and Jeep. 6-1/4"W x 6-3/4"H x 2-3/4"D overall. Par-36 sealed beam cushioned by durable, molded, weatherproof housing from road shock and vibration, snaps in for fast, easy service. Universal 5/16" stud and adjustable, zinc-plated bracket allow mounting in any position. 10" lead wire exits through housing back. Uses No.4411 beam for trapezoid pattern. Industry-standard PL3 socket integrated into housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position. Suitable for over-80" vehicle width applications. 7-diodes, LED oval. Kit contains light, grommet and plug. Proudly made in the USA.
LIGHT STOP 6-1/2 OVAL LED
Our Price: $12.43
Industry-standard PL3 socket integrated into housing. 7-diodes, 4" round. 9-16 volt operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491 connecting plug. Proudly made in the USA. Operates from 9-16 volts. Features a 2-wire, hard-wired design. Ground wire includes number 10 ring terminal. One-piece housing sealed with epoxy eliminates any weld joints. Comes with mounting gasket. 16-1/8" overall length. Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12-foot coiled cord with cigarette lighter plug. 5 1/2" x 4 3/4".
Kit with decorative snap-on chrome bezel included. Hard-wired design eliminates the need for separate plug and reduces connection points. Designed for horizontal installation. 9-16 volt operating range. Meets FMVSS 108 requirements. 7-1/2" length x 3-1/4" height. Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. 4-1/2" width x 4-1/2" height x 2" depth. Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 456-series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers 80" wide and over. 7-15/16" width x 2-7/8" height x 2-7/8" depth.
Provides all legal lighting and reflective equipment for any trailer less than 80"W. Combination lights, of tough molded housing and lenses with phosphor bronze contacts for durability, exceed DOT requirements for stop, turn, tail, rear and side reflector, side marker and license illuminator. Side marker light has built-in reflector optics. Includes No.440 stop and tail combination lights, 2 No.114A side marker lights, 20' wire harness, 48" trunk connector, license bracket, all mounting hardware, and installation instructions. Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. 4-1/2" width x 4-1/2" height x 2" depth. Two auxiliary warning lights with magnetic bases. Kit includes trunk harness, 20' four-wire harness, connectors, and instructions. Plugs into standard flat four-way vehicle trailer light connector.
Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80" wide applications. Exceeds DOT requirements for stop, turn, tail, rear and side reflector, side marker and rear clearance. Includes No.452 Belljar submersible lights, 25' trailer harness, 48" trunk connector, plastic license bracket, all mounting hardware, and installation instructions. Front side marker lights and reflectors needed to meet DOT requirements. Provides rear lighting and reflectors for trailers. Lights feature easy maintenance and bulb replacement while maintaining gasket seal, and grounding through a separate lead wire. Includes 2 low-profile, submersible combination taillights (1 with license light) that mount on slide-on 2'' centers, 25' trailer harness, 48" trunk connector, license bracket, mounting hardware, and installation instructions. Front sidemarker/clearance lights, side reflectors, and rear identification lights are necessary to meet all DOT requirements. Submersible LED rear lighting kit for trailers under 80" wide. Solid state super bright LED diodes, 100,000 hour rated life. Includes 840/840L LED tail lights plus license bracket, mounting hardware and installation instructions.
   
 
1 2