Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > FUEL CANS & SUPPLIES
Choose a sub category:
UTILITY CANS FILTERS ACCESSORIES
GAS CANS KEROSENE CANS METERS
PUMPS & ACCESSORIES
Sort By:
1
FILTER ELEMENT
Our Price: $4.68
Transfers fluid for everyday projects or in emergency situations. 5-foot PVC hose. Use to replace element of No.495 (SKU 636-3667) standard fuel filter; will fit No.496 (636-4897) fuel filter. Eco spout that offers a spring-loaded fuel transfer solution with auto shutoff. No buttons to push. EPA approved, automatically re-locks after each use.
REPLACEMENT CANISTER
Our Price: $5.89
Replacement for No.595 (SKU 622.0990) spin-on fuel filter. Easy dispensing of gear oil, power steering fluid, hydraulic oil, and compression oil. Constructed of durable ABS plastic. Dispense 1 fluid ounce of product with each depression. Designed to fit all Sta-Lube quart, 1/2-gallon and gallon containers. Carded. Fuel jug spout and vent kit, only fits plastic cans. For use on portable fuel containers manufactured prior to January 1, 2009. Kit includes spout and cap, second cap for spout or can vent, 1/2" replacement push in vent, second base cap to fit additional cans and flame arrester.
Replacement water jug spout and vent kit. Kit includes spout and cap, second cap for spout or can vent, 1/2" replacement push in vent, second base cap to fit additional cans and a filter screen. Advanced spout design combined with child-resistant features and emission reducing technology. Features variable flow, automatic venting, automatic locking when lever is released, and an airtight seal when not in use to reduce spills. Meets (CARB) and EPA requirements for portable fuel containers. High flow fuel replacement spout and vent kit. For use on portable fuel containers manufactured prior to January 1, 2009. Kit contains spout and cap, 8" spout extension for hard to reach tanks, 1/2" replacement push in vent, second base cap to fit additional cans and a flame arrester. 7/8" opening, fast fueling for off road equipment, tractors, boats and more.
WATER ABSORBING ELEMENT
Our Price: $8.92
High flow water replacement spout and vent kit. 7/8" opening, fits most old style water jugs and cans. Kit includes spout and cap, 8" spout extension for hard to reach tanks. 1/2" replacement push in vent and second base cap to fit additional cans. Advanced spout design combined with child-resistant features and emission reducing technology. Features variable flow, automatic venting, automatic locking when lever is released, and an airtight seal when not in use to reduce spills. Meets (CARB) and EPA requirements for portable fuel containers. Removes water molecules from gasoline or diesel fuels with water-absorbing polymers that restrict fuel flow when its time to replace. Use to replace element of No.496 (636-4897) water-absorbing fuel filter, will fit No.495 (SKU 636-3667) fuel filter.
WATER BLCK REPL CANISTER
Our Price: $10.85
REPL BOWL/FUEL FILTER
Our Price: $12.35
Made of durable, rust- and dent-proof, high-density polyethylene with convenient back and top handles for easier pouring. Self-venting spout. Dimensions: 14.25" x 8.50" x 18.5". Replacement for No.596 Water-Block spin-on fuel filter. Replacement bowl for 495 and 496 fuel filters.
Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gallon). The top handle is for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Advanced spout design combined with child-resistant features and emission reducing technology. Features variable flow, automatic venting, automatic locking when lever is released, and an airtight seal when not in use to reduce spills. Meets (CARB) and EPA requirements for portable fuel containers. CARB and OTC compliant. Automatically closing, self-venting, self-regulating spout and child resistant closure cap.
SPIN ON FILTER
Our Price: $20.38
CARB and OTC compliant. Automatically closing, self-venting, self-regulating spout and child resistant closure cap. Fits 30 or 55 gallon drums. Delivers 1-1/2 pints per 36" lift stroke. Rod style with steel piston and valves, no rubber packing or sleeves. Die-cast head with garden hose threads and 18-gauge steel cylinder. Includes curved metal spout and adapter. Pump outlet is threaded for 3/4" garden hose coupling. 2" bung nut included. For farm, construction, industrial, and service station use with gasoline, gasohol, diesel fuel and other fuels. Filters microscopic particles of rust, sand, dirt, scale, and lint. 426 square inches of filtration area. Up to 50 PSI and/or 12 GPM max recommended working conditions. Uses No.595-5 (SKU 622.1204) replacement cartridge.
Cast iron 3/4" filter head for F1818PM0 and F1810HM0 filters. For transferring from one container to another, or draining oils and other fluids. Hand-operated, self-priming. For farm, home, automotive, and factory use. Heavy-duty steel construction with durable Viton o-rings. 8' vinyl hose (0.50"ID x 0.63"OD) to handle up to 90-wt. fluids. Features a double check valve. 1-gallon/8 strokes. For farm, construction, industrial, and service station use with gasoline and diesel fuels. Filters microscopic particles and absorbs water from fuel. Restricts fuel flow as water is absorbed, signaling the need for an element change. 201 sq.in. of filtration area. 50 PSI and/or 12 GPM max recommended working conditions. Uses No.596-5 (SKU 622-1311) replacement cartridge.
Plastic, lightweight, dent resistant, rust proof, non-corroding. 1.6 gallon gasoline, .6 gallon oil. Child resistant spout with automatic shut-off and overflow protection. Spouts fit inside the can openings until needed. CARB & EPA Compliant. Compatible with gasoline and diesel. 3/4" manual nozzle for use with electric fuel pumps. ULCUL Listed. For a broad range of high flow fueling applications from farm tractors and combines, heavy earth-moving equipment, fleet re-fueling, to above ground storage tanks and portable truck mounted fueling operations. 1" aluminum nozzle, 1" NPT outlet, manual nozzle. 50 PSI working pressure. Integral hanging hook compatible with all Fill-Rite products. Minimal spray pattern to reduce foaming and false shut-offs. Viton seals and o-rings for smooth valve operation. Rated to -20 degrees F operation. Compatible with gasoline and diesel.  UL/cUL listed. Made in USA.
FUEL TANK FIILTER
Our Price: $25.15
Removes microscopic particles of rust, sand, dirt, scale and lint for farm and ranch, light industrial, and recreational uses. 366 sq.in. filter surface for efficient action. Works well by itself or in combination the No.496 (SKU 636-4897) fuel filter for added protection from water in the fuel. Replaceable microscopic particle element No.470-5 (636-4731); can use No.496-5 (622-0859) water absorbing element. 9-1/2"H x 4" diameter. Fits 5 to 55 gallon drums. Polypropylene housing, steel rods and Viton seals. For water, alcohol, gas, diesel, kerosene, and petroleum based products. 9 oz. per stroke. Fits 5 to 55 gallon drums with standard bung. Polypropylene construction, stainless steel rods and Viton seals. Use for DEF (urea), mild acids, alcohol, mild alkalines, anti-freeze, diesel, gas, machine oil, petroleum, thinners and windshield washer fluid. Delivers 9 oz per stroke.
Removes water from gasoline and diesel fuel for farm and ranch, light industrial, and recreational uses. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. Works well by itself or in combination with a No.495 (SKU 636-3667) fuel filter for added protection against microscopic particle contamination. Replaceable water-absorbing element No.496-5 (622-0859); can use No.470-5 (636-4731) microscopic particle element. 9-1/2"H by 4" diameter. Two-piece telescoping suction tube fits 30 to 55 gallon drums for a wide variety of liquids. Easy-to-operate suction lift dispenses approximately 10 ounces per stroke. Complete with standard bung adapter, tough all-steel foot valve and piston valve. Standard garden hose thread discharge spout. Vented fill cap with a 2" base for tanks with a 2" opening.
Drum or barrel mounted lever action die cast and steel piston pump, up to 11 oz. per stroke. Adjustable packing nut. Nitrile rubber seals. Fits 1-1/2" and 2" bung openings. 1" diameter steel telescoping suction tube. Garden hose threads on spout for greater flexibility. Pumps diesel fuel, hydraulic and transmission fluids, and motor oils up to 40 weight. Steel telescoping suction tube to accommodate different drum and barrel heights Siphon handle with a 5 gallon fuel can included. Pumps gas for easy, clean fill-ups in hard-to-reach fuel tanks. At-the-handle pump control allows for auto shut-off and restarts, as well as clean, hassle-free siphon control. Pumps gas in any direction. Delivers a flow rate of over 2 gallons per minute (7.5 L) when used in siphon mode. Comes with a shut off valve that attaches to the closure cap of any manufacturers plastic fuel can and a built-in child lock on the siphon handle for added safety. For transferring non-corrosive petroleum-based fluids of light to medium viscosity in industrial, commercial, automotive, and agricultural applications. Single direction, 2-vane pump with rugged cast-iron housing and 42" steel suction pipe. Designed to transfer liquids at a rate of 1 gal./18 revolutions with SAE 10 oil. Includes 2" bung nut and 3/4" pump outlet with removable steel spout.
Designed to use with barrels or tanks for all types of petroleum products; SAE30 motor oil max viscosity. Fluid transfer made smooth and easy. Siphon effect achieved by attaching hose to outlet spout. Lightweight die-cast aluminum body. Included suction pipe adjusts for 15 to 55 gallons drums. -15 to 150 degrees Fahrenheit min to max ambient operating temp. 7.5 gallons of fluid per 100 revolutions. 1" NPT inlet, 2" NPT bung adapter and suction tube. 1"OD gooseneck discharge spout. Automatic nozzle with a 3/4" unleaded or 1" leaded spout. For use with 1200, 700 and FR600 series pumps. Automatic nozzle with a 3/4" unleaded or 1" leaded spout. For use with 1200, 700 and FR600 series pumps.
Economical, easy-to-use pump for barrels, drums, kegs, small volume returnables and storage tanks. Pumps approximately 11 fluid ounces with every stroke. Constructed of polypropylene with fluorocarbon seals and equipped with an anti-drip nozzle and telescopic suction pipe for drums up to 36" and 2" NPT Bung adapter connections. Can be used with DEF (Diesel Exhaust Fluid). This chemical is caustic and cannot be used in other Tuthill Corporation pumps. Telescoping suction pipe included. Made in USA. Repair kit for 600C, 1200C, 2400C, 4200D and 4400 pumps. Capable of flowing at over 30 gallons per minute. Fills a 200 gallon tank in less than 7 minutes. For transfer of gasoline, diesel, or kerosene to large fuel capacity farm, fleet, or construction equipment. 1" NPT inlet, 1-1/8" OD spout. One-finger hold-open three-position latch for automatic flow at 30, 24 and 8 GPM. Angled outlet to minimize hose wear. 50 PSI working pressure. Heavy duty hanging hook compatible with all Fill-Rite products. Automatic shut-off. Rated to -20 degrees Fahrenheit operation. Insulated hand grip to minimize hot and cold handling. Minimal spray pattern to reduce foaming and false shut offs. Large spout spring to hold nozzle in place. Vitron seals and o-rings for smooth valve operation. UL/cUL listed for gasoline, diesel and kerosene. Made in USA.
Rotary hand pump is effective with medium viscosity liquids, as well as oils, gasoline and diesel fuels. Rotary action allows smooth, continuous transfer at up to 10.3 ounces (0.306 Liters) per revolution, 10 GPM (38 LPM) per 100 revolutions. Lightweight cast aluminum body with built-in check valve and strainer. 2" tank adapter. Corrosion-proof adjustable suction pipe. Anti-siphoning device. Maximum dry vacuum of 6" of mercury. Minimum lift is 8' of diesel. Pump may be padlocked. UL Listed. Extremely portable. For use with diesel, light oils and antifreeze. For drums and totes. Up to 10/38 GPM/LPM flow rate. 3/4" inlet/outlet. Cast iron body. Bypass valve and lip seal for leak protection. 1/5 horse power. 6-1/2' power cord with battery clamps. 20 amps. 30 minute duty cycle. Includes 8' PVC suction hose with strainer, 8' PVC discharge hose and 3/4" manual polypropylene nozzle with swivel. Basic UL Listed pump designed for all types of petroleum products. Vacuum breaker, bung adapter designed to fit standard 2" NPT bung on most barrels and tanks, 1" inlet and 3/4" outlet, 8' long hose and nozzle, and telescoping suction pipe. Works with No.807CMK (SKU 663.6831) meter kit sold separately. Built-in strainer and anti-siphon valve. Lightweight cast aluminum. Easily accessible for cleaning. Security handle equipped with bracket for padlocking. 20 GPM at 100 push/pull strokes per minute. Diesel fuel max recommended viscosity of pumped fluid. -15 to 150 degrees ambient operating temp. 10" of mercury dry vac, 11' diesel min suction lift.
Flow rate of 5 to 20 GPM. Accurate to within +/- 2-percent. NPT female inlet and outlet flow ports. 50 PSI max pressure. Meters fluid at temperatures - 15 to 150 degrees Fahrenheit. Diesel fuel max viscocity, compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Weatherproof, corrosion resistant. Register indicates up to 99.9 gallons. Zero reset unit wheels have large 11/16" figures. Large, easy to read numbers. Totalizer registers to 99,999.9 gallons. Compact design, 8" x 6" x 6". Convenient, large, quick reset knob with positive zero stop. Furnished for horizontal piping, left to right flow. Not for resale use. CUL/UL Listed. Kit includes meter with fittings to add to Nos.112, 122, FR152, FR162, FR1210C, FR610, and FR700. Flow rate of 6 to 40 GPM. Accurate to within +/- 2-percent. 1" inlet and outlet flow ports positioned vertically or horizontally. 50 PSI max pressure. Rated for gasoline, diesel, kerosene, mineral spirits, solvents and heptane.  Weatherproof, corrosion resistant. Aluminum housing, Viton and Buna seals. UL/cUL, CE, Ex. Pump only. Weighs less than 27 pounds. Draw is easy on the DC power source. Compatible with petroleum  products of all types including diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. 2" threaded base for tank openings. Integral check, automatic bypass and thermal-relief valves, and built-in strainer (inlet screen). No foot valve or lubrication required. Offers corrosion-proof adjustable section pipe, iron rotor, machined carbon vanes, heavy-duty switch, thermal overload protector and junction box. Pump security equipped for padlocking. Basic 12 volt DC pump with nozzle boot that protects against dirt and contamination. Pump only, accessories sold separately. 2" male NPT on bung adapter/1" female NPT on suction port inlets; 3/4" female NPT outlet. Explosion-proof 1/4-HP 12 volt DC/20 amp, 2600 RPM motor with permanent magnet and sealed ball bearings. 30 minute duty cycle, not for continuous operation. Delivers up to 15 GPM. 12-1/4" width x 9" height x 9" depth. CUL/UL Listed pump and motor, and bears CE marking.
The ruggedness of cast iron and portability of DC power. Delivers up to 13 GPM. Designed for tank or barrel mounting. Thermally protected, CUL/UL listed, explosion-proof, 1/4 HP motor. 2" NPT, no tank adapter needed. 3/4" x 10' long hose, manual nozzle and 15' power cable. 1" polymer adjustable suction pipe. Positive displacement, rotary vane configuration. Ball bearing construction, no lubrication required. 30 minute duty cycle. Pump security equipped for padlocking. Compatible with diesel fuel, gasoline, kerosene, and mineral spirits. 12 volt DC. The ruggedness of cast iron and convenience of AC power. Delivers up to 10 GPM. Designed for tank or barrel mounting. Thermally protected, CUL/UL listed, explosion-proof, 1/4 HP motor. 2" NPT, no tank adapter needed. 3/4" x 12' long hose, manual nozzle, and 1" adjustable polymer suction pipe. Positive displacement, rotary vane configuration. Ball bearing construction, no lubrication required. 30-minute duty cycle. Pump security equipped for padlocking. Compatible with diesel fuel, gasoline, kerosene, and mineral spirits. 115 volt AC. Weighs less than 27 pounds, with hose and nozzle. Draw is easy on the DC power source. Compatible with petro products of all types including diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. 2" threaded base for tank openings. Integral check, automatic bypass and thermal-relief valves, and built-in strainer (inlet screen). No foot valve or lubrication required. Offers corrosion-proof adjustable section pipe, iron rotor, machined carbon vanes, heavy-duty switch, thermal overload protector and junction box. Pump security equipped for padlocking. Basic 12 volt DC pump, 15' long heavy-duty 3 wire battery cable, manual nozzle with nozzle boot that protects against dirt and contamination, telescoping suction pipe, and UL Listed 3/4" x 12' long hose with static ground wire. 2" male NPT on bung adapter/1" female NPT on suction port inlets; 3/4" female NPT outlet. Explosion-proof 1/4 HP 12 volt DC/20 amp, 2600 RPM motor with permanent magnet and sealed ball bearings. 30 minute duty cycle, not for continuous operation. Delivers up to 15 GPM. 12-1/4" width x 9" height x 9" depth. CSA approved, CUL/UL Listed pump and motor, and bears CE marking.
DC motor with a flow rate of 20 GPM and 22 amp draw. Built-in check valve, bypass valve and thermal expansion valve. 1" diameter, 12' hose and 1" manual nozzle. Corrosion-proof adjustable suction pipe. Explosion-proof permanent magnet motor. Thermal overload protection. 30 minute duty cycle/not for continuous operation. Ball bearing construction, no lubrication required. Machined carbon vanes. 2" threaded base for tank openings. Rain proof. Pump may be padlocked. 1/4 HP, UL/cUL listed, 12 volt. Rugged, lightweight, positive displacement, direct drive pump compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Diesel fuel max recommended pumped fluid viscosity. Offers heavy-duty switch and built-in check, bypass, and pressure-relief valves. Ball bearing construction; no greasing or oiling required. Thermal overload protector. Pump security-equipped for padlocking. Furnished with tank adapter for skid tank mounting, pedestals for island installations sold separately. Able to direct mount to above ground tank. Complete with UL Listed 3/4" x 12' long hose and manual nozzle. 150 to -15 degrees Fahrenheit max to min ambient operating temp. 12" of mercury min dry vac, 10' min gas/15' min diesel suction lift. 1" female NPT on suction pipe/2" male NPT on bung inlet, 3/4" NPT outlet. Full 1/3-HP 115-volt AC/60Hz explosion-proof motor. 5.5-amp, 1725 RPM. Delivers up to 20 GPM. 14" width x 11" height x 12" depth. CSA and CUL/UL Listed. Rugged, lightweight, positive displacement, direct drive pump compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Diesel fuel maximum recommended pumped fluid viscosity. Offers heavy-duty switch and built-in check, bypass, and pressure-relief valves. Ball bearing construction; no greasing or oiling required. Thermal overload protector. Pump security-equipped for padlocking. Furnished with tank adapter for skid tank mounting, pedestals for island installations sold separately. Able to direct mount to above ground tank. Complete with UL Listed 3/4" x 12' long hose, manual nozzle, and No.807C flow meter installed. 150 to -15 degrees Fahrenheit max to min ambient operating temp. 12" of mercury min dry vac, 10' min gas/15' min diesel suction lift. 1" female NPT on suction pipe/2" male NPT on bung inlet, 3/4" NPT outlet. Full 1/3 HP 115 volt AC/60Hz explosion-proof motor. 5.5 amp, 1725 RPM. Delivers up to 20 GPM. 14" width x 11" height x 14" depth. CSA and CUL/UL Listed.
   
 
1