Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > RIGHT ANGLE DRILLS
Sort By:
1
Built in electronics include variable speed control, an electronic clutch, 11 settings plus drill mode, fuel gauge,and overload protection, single sleeve ratcheting chuck, extended paddle switch, LED's illuminates work surface. Specs: 12V. no load speed is 800RPM, 100 in/lbs torque, head length is 3-3/4", single sleeve, ratcheting, Lituium-Ion battery, 11.75" long, weighs 2.43lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case. Compact for easy access in tight places with variable speed reversing, paddle switch, shielded chuck, 100 percent ball bearing construction, double gear reduction increases torque performance, decreases gear stress, pistol grip handle. Specs: no load speed 0-1,200RPM, max watts out 200W, capacity in: wood (spade bit)-1-1/8", wood (hole saw)-1-1/8", steel (twist bit)-3/8", (hole saw)-3/4", gear reduction double , anti-slip grip, anti-lock control, spindle lock , weighs 3.75lbs. Includes: chuck key with holder. Compact, easy use between framing studs or any other close quarter application with variable speed for controlled drilling in wood/metal and speedy fastening, built in shock proof, high output, white LED light illuminates drilling area with a bulb that never needs replacing throughout the life of the tool, paddle switch with speed limiting dial, reduced head height, ball bearing construction. Specs: capacity in: wood-13/16", steel-3/8", no load RPM is 0-2,400, 10-5/8" long, weighs 3.1lbs. Includes: grip complete, chuck key, key holder.
D-handle power and a right angle drive head for stud and joist drilling, head and handle swivel 360 degrees, can be locked tight in any position, low speed,0-335, high speed 0-750, side handle, three speed ranges, all ball and roller bearings, use with up to 2-9/16" self-feed bits. Specs: 120AC, no load RPM is 0-500, capacity in: wood (auger bit)-1-1/2", (self-feed bit)-3-5/8", (hole saw)-6", metal (twist bit)-1/2", quadruple gear train, 8 ft. Quik-Lok cord, grounded, 16-3/4" long, weighs 10.3lbs. Includes: RAD assembly, side handle, 9/16" open end wrench, 3/16" socket wrench, chuck remover bar. Three speed ranges offer versatility of matching the appropriate speed to the application, right angle drilling and straight drilling, die cast metal gear housing, 5-position side handle, 360 degree right angle attachment, triple gear reduction provides increased torque and reduces gear stress, double insulated, meets OSHA Standards, U. L. Listed. Specs: no load speed is 400/600/900RPM, max watts out is 580W, capacity in: wood (spade bit)-1-1/2", (self-feed)-2-9/16", (hole saw)-4", Wood (auger bit)-1-1/2", in metal: (twist bit)-1/2",  (hole saw)-5", triple gear reduction, weighs 9.75lbs. Includes: chuck key with holder, 5-position side handle, Allen wrench, kit box. Powerful, yet compact for large hole drilling between joists and studs, two speed ranges increase the versatility of this drill, hi-torque and hi-speed for the heavy duty user with an extra long pipe handle that helps you control the power. Specs: 120AC, no load RPM is 300/1,200, capacity in: wood-(auger bit)-1-1/2", (self-feed bit)-4-5/8", metal (twist bit)-1/2", spindles 5/8"-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.5lbs. Includes: pipe handle.
Two operating speeds with a clutch in the low gear range, speed shifting is easy, easy turn gear shift knob, comfort grip handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications. Specs: 120A, no load RPM is 450/1,750, low speed clutch, capacity in: wood (self-feed bit)-4-5/8", (hole saw)-6", metal (twist bit)-1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, 22" long, weighs 14.7lbs. Includes: side handle.
   
 
1