Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > POWER MITRE BOXES
Sort By:
1
Compound miter saw has horizontal D handle, Quick lock miter adjustment, Cast aluminum table, Accessories include one blade wrench, two extension rails, one work clamp, one dust bag, and 10" x 40T carbide tipped saw blade, 5/8" arbor size, 0 to 45 deg. bevel capacity, Miter 0 deg. bevel deg. 4" x 3-1/2" max cutting capacity, miter 0 deg. bevel 45 deg. 4" x 2" max cutting capacity, miter 45 deg. bevel 0 deg. 2-3/4" x 3-1/2" max cutting capacity, miter 45 deg. bevel 45 deg. 2-3/4" x 2" max cutting capacity, 120 VAC, 60 Hz, 5200 rpm no load speed, Weight-28.6 lb. Lightweight and aggressive tool design with has a powerful motor and large table for increased material stability. Thumb actuated positive stops. Adjustable pivot fence for supporting large 15 Amp motor, intense power for the toughest cutting jobs. 0-52 degree miter angle range, to the right and left for increased flexibility. 0-48 degree bevel range, to the left with adjustable bevel stops for precision cuts. Horizontal handle with soft, Elastomer grip adds comfort and control. Large extended flip fence, raises to 4" for cutting crown molding vertically. Large table, provides better material support. Thumb actuated positive stops. Carbon brush access, allows user to replace brush as needed. Dust collector attachment. SPECIFICATIONS: Blade Diameter: 10"; Amps: 15; No-Load Speed: 5,000 RPM; Miter Angle Range: 0-52 Degrees L & R; Bevel Angle Range: 0-48 Degrees Left; Handle: Horizontal; Weight: 26.3 lbs. INCLUDES: 10" TCT Saw Blade, Extended Fence, Dust Bag, Vise Assembly, Box Wrench. Hex Bar Wrench. Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench.
Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp. Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule. Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock.
Hi-torque gearbox reduces motor stresses, improving performance and durability. Cuts steel, aluminum, wood  and plastics easily, leaves no burr and offers an instantly workable finish, no coolant required and virtually no sparks are produced, 11-13/16" slide action. Compound tilt and slide mechanism offers a solution to almost all common applications, laser guidance, extra large base, extendable fence guard for long workpieces. Specs: 230v or 110v/50Hz, 2000W (soft start), max depth cut (90 degrees): 3", (45 degrees mitre): 1-1/2", (90 degrees mitre): 11-13/16",  (45 degrees mitre): 8-1/4", no Load speed-2500 min-1, dimensions are (HxWxL) 25"x20"x30", and weighs 41 lbs. Includes: Includes: Rage3 blade, box spanner for blade change, (2)work piece supports and end stop, (1) top clamp, dust bag and operator's manual. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included. Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degress) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence.
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. Largest crown molding cutting capacity in its class, compact design with a 4-steel rail sliding system further increases rigidity to produce superior cuts, exclusive 6 linear ball bearings deliver smooth, solid, and adjustment-free 'dead-on' accurate cuts, increased capacity for up to 6-5/8" crown molding (vertically nested), 4-3/4" baseboard (vertical), and 12" crosscuts at 90 degrees. Built-in laser indicates line-of-cut. Specs: max cutting capacity: 90 degrees-2-13/16"x 12", 45 degrees(L/R)-2-13/16"x8-1/2", no load RPM is 3,200, arbor 5/8", size (LxWxH) 28-1/8"x25-1/4"x26-1/2", weighs 53.3lbs. Includes: 10"x 5/8" 60T TCT saw blade, vertical vise, dust bag, triangular rule, socket wrench #13, hex wrench. Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included.
Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with  clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included.
   
 
1