Choose a sub category:
Sort By:
Protects the top pad of any Bench Cookie while spray finishing; snaps to any Bench Cookie to add grip; won't slip or slide on work surface; stackable for easy storage. For grinding or buffing. Right hand thread only. For grinding or buffing. Right hand thread only.
Blade-Loc is a revolutionary blade-changing tool that provides safer changes for your table saw blades; it protects your hands from serious injury; no more chipped or bent blades; fits all 10" table saws; replaces the scrap wood and double-wrench methods of blade changing. Limited Lifetime warranty. Universal dust bag fits all Dewalt miter saws. Features a built-in storage magnet, pencil holder, and removable locking depth gauge. Easy-grip handle. Impact resistant plastic.
Time-saving and accurate saw fence micro-adjuster. Allows you to dial-in precise adjustments easily with one hand to your Kreg Precision router table or Precision band saw down to .005". Easy to grip ribbed dial. Black plastic fixing knob. Dimensions: 7" x 2" x 5". Provides a consistent and optimum pressure. Made from a durable plastic composite body. Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more. Roller support stand,black shiny finish, with yellow plastic adjustable roller handle. Open range size, 7-1/8" W x  26-9/16" , 42-1/2" H, zinc plated roller, 11-1/4" W x 1-7/8" Dia. x 0.039 (1.0mm), folding size, 29-3/4" L x 17-1/8" W x 2-3/4" H, square feet tube, 21" L x 1-3/16" W x 0.059" (1.5mm), load capacity, 198 lbs.
Use to hold trim at the angle required, eliminating the need for advanced compound miter cuts and difficult 'coping'. Curved design compensate for a wide variety of crown molding spring angles, and its extension arms let you work with crown up to 5-1/2" wide with a 12" saw and 3-1/2" wide with a 10" saw. Used to accurately position crown molding vertically against saw fence at exactly the same angle for every cut.  Includes: (2) stops, one for each side of blade. Picture frame cutter has mitered sides that orient the workpiece to exact 90 degree angles. Once in place, the cutter's stops and gauges provide set up for precise cuts to desired dimensions. Can be set up for repetitive cut operations to achieve perfect 90 degree angles every time. Can cut a frame to match a pre-sized piece of glass or matting, capable of cutting rabbets that serves as a shelf to hold pictures or art along with matting and pane. For use with Bladerunner saw 240.3343.
V-belt size "A" section, 2'' pulley diameter, 7-1/2'' shaft length. Right and Left threaded ends. Add safety and convenience to your Precision Router Table with this incredibly handy power switch. Features a 2 plug design which allows it to control two independent devices at once. Key-Lok which eliminates accidental power-on, and a long 8' heavy-duty 14 gauge power cord. 15amp, 120v. Rugged 3/8" thick phenolic insert plate designed to provide a solid, flat and perfectly level mounting surface for your router. Measuring 9-1/4" x 11-3/4", it will accept almost any router (even large, heavy models) with ease. Comes without any pre-drilled mounting holes. Alignment marks engraved on the underside make it easy to center and mount any router using the detailed instructions that are included with the plate. The plate is equipped with Level-Loc reducing rings that allow you to easily change the size of the opening around the router bit. Ring sizes: 1", 1-3/16" and 2-5/8".
Pre-drilled plate to fit Porter-Cable 690 and 890 series and the Bosch 1617. Level-Loc rings mount flush with plate surface. Removable brass starting pin. Reducing rings that installs in seconds and locks in place flush every time. Makes set up changes simple by allowing you to quickly swap inserts. Three rings are included to allow the use of large or small bits, as well as guide bushings: 1", 1-3/16" (for use with Porter-Cable style guide bushings) and 2-5/8". Plate measures 9-1/4" x 11-3/4" and is made from 3/8" thick phenolic that won't sag, even under the weight of heavy routers. The plate comes with plate mounting screws and detailed installation instructions. Pre-drilled plate to fit Triton Routers. Level-Loc rings mount flush with plate surface. Dimensions: 12.2" x 13.8" x 1.2".  Allows you to quickly swap inserts. Three rings are included to allow the use of larger or small bits, as well as guide bushings: 1", 1-13/16" (for use with Porter Cable style guide bushings) and 2-5/8". Made from 3/8" thick phenolic that won't sag, even under the weight of heavy routers. The plate comes with a removable brass starting pin, plate mounting screws and detailed instructions. Add true mobility to your Universal Steel stand. Includes 4 heavy-duty casters. Dual-locking mechanism protects against caster roll and pivot. Includes all necessary hardware.
Folds for easy storage. Portable, lightweight and durable. Fits No.DW745 (SKU 281.2428) jobsite table saw. Universal steel base. Heavy gauge steel construction. 31" to 36" height adjustability. 4 stable leveling feet and assembly hardware are included. Durable painted finish. C-shaped upper and lower stretchers are pre-drilled to attach to the Klamp Tabletop and lower shelf if desired. Fast and easy assemble. Dimensions: 20"D x 28"W x 36"H. Table Top Not Included. Base Only. Professionally Edgebanded MDF top. Easy-Slide Micro-Dot skin. Dual steel support struts. Heavy duty construction supports the largest routers and lifts. Combination Miter/T-Slot. Phenolic insert plate with dual reducing rings. Unique bottom-up insert plate levelers. Porter-Cable guide busing compatibility. 24" x 32" x 1-18" thick MDF.
Innovative self-squaring T-Square style design. Mounts to tables between 3/4" and 1-1/2" thick. Fully enclosed aluminum extrusion and full length vacuum chamber for a cleaner shop. Fully independent fence faces for use as a vertical jointer. Universal tool mounting clamps for fast and easy on/off access to stand secures all miter saws and other bench top tools. Adjustable positive locking extension arms supports and facilitates cutting extra long stock. Flip up stop for consistent repetitive cuts. Left and right extension arms provide 114" of overall work support. Locking pin holds legs securely in place. Sturdy tubular steel legs with non-sliding rubber feet. Extends from 46" to 114" width, Includes instruction manual. Quick-adjust split-fence design with independently adjustable halves. Large 19-3/4" x 16-3/4" table with cast-in lip to support extensions. 3/4" miter gauge slot, multiple starting pin locations, dust collection hood sized for 2-1/2" hose. 12-7/8" leg height allows use of 1-1/2 to 3-1/4 HP routers. STANDARD EQUIPMENT:  shaper table, 3/4" miter gauge, operating manual.
The re-designed precision features a full size router table in a compact, portable package. Durable and versatile. Equipped with all new Level-Loc reducing rings that twist into place and lock in level and flush with the plate surface. The plate comes with three rings: 1", 12/16" (for use with Porter-Cable style guide bushings) and 25/8". Laser engraved markings that make it easy for you to center and mount any router. Re-designed heavy-duty aluminum fence with new clamps that allow quick, confident fence adjustment. Just flip the cams up, move the fence, and then flip the cams back down to lock the fence in place. Sturdy galvanized steel construction, left and right extension arms provide 132" of overall work support, universal tool mounting clamps, four work supports, self-locking, folding legs, flip-up work stop for consistent repetitive cuts and carrying handle. Universal design works with all brands of miter saws. Lightweight aluminum construction, 5-1/2 ft. beam extends to support up to 16 ft. of material and up to 400 lbs. Legs provide support and fold for easy storage. Work stops/supports can be repositioned quickly anywhere along the rail. Non-marring feet, Miter Saw Not Included. Includes: (1) heavy duty miter sawstand, (2) convertible work supports/stops and (2) mounting brackets.