Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > SAW BLADES & ACCESSORIES > SAW BLADES- CARBIDE FINISH CUT
Choose a sub category:
5-1/2 INCH OR SMALLER BLADES 6 TO 6-1/2 INCH BLADES 7 TO 7-1/4 INCH BLADES
8 TO 8-1/2 INCH BLADES 10 INCH BLADES 12 INCH BLADES
Sort By:
1
Ultra thin kerf. .059", cordless saw blades are engineered to optimize the cutting performance of all DeWalt 5-3/8" and 6-1/2" cordless saws. Anti-stick rim reduces friction and gum-up. Alternate set teeth. Use for cutting thin materials. Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts; slots for straighter cuts. For fast cuts in wood.
Smoother cut from exclusive plate technology. Reduced cutting force: teeth are face ground/sharpened. Impact resistant. 18-degree hook angle. ATB tooth grind. 7000 RPM. The best value for an economy blade. Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts; slots for straighter cuts. Cordless trim saw blade has an ultra thin kerf and is designed for use in construction and remodeling. Laser cut blade features a thin kerf, this makes it good to use with portable and low powered saws on the jobsite. Alternate top bevel., 12,000 RPM, +5 degree hook angle, .039" plate, .049" kerf.
Smoother cut from exclusive plate technology. Reduced cutting force: teeth are face ground/sharpened. Impact resistant. 18-degree hook angle. ATB tooth grind. 7000 RPM. Smoother cut from exclusive plate technology. Reduced cutting force: teeth are face ground/sharpened. Impact resistant. 18-degree hook angle. ATB tooth grind. 7000 RPM. Super thin laser cut kerf provides faster, cleaner, more exacting cuts. Perma-Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact-resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth. Used in applications such as smooth finish crosscuts in hardwood, softwood.
Cordless trim saw blade has an ultra thin kerf and is designed for use in construction and remodeling. Laser cut blade features a thin kerf, this makes it good to use with portable and low powered saws on the jobsite. Alternate top bevel., 12,000 RPM, +5 degree hook angle, .039" plate, .049" kerf. Smoother cut from exclusive plate technology. Reduced cutting force: teeth are face ground/sharpened. Impact resistant. 18-degree hook angle. ATB tooth grind. 7000 RPM. Smoother cut from exclusive plate technology. Reduced cutting force: teeth are face ground/sharpened. Impact resistant. 18-degree hook angle. ATB tooth grind. 7000 RPM.
Super thin laser cut kerf provides faster, cleaner, more exacting cuts. Perma-Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact-resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth. Used in applications such as smooth finish crosscuts in hardwood, softwood. Thin kerf, .083", saw blades for miter saws and table saws. Precision tensioned and balanced blade for an accurate cut; #400 grit diamond ground teeth for a smooth finish. Alternate top bevel,  15 degree hook angle. Ultra thin kerf, .063", for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.
Thin kerf saw blade for circular saws and table saws. Designed for smooth ripping and crosscutting in wood, all building materials, plywood, chipboard, paneling, pressboard and marlite. Provides smooth finish used for woodworking and construction. Alternate top bevel, .070" plate, .122" kerf, 10 degree hook angle. Thin kerf blade with machine welded carbide tips. Anti-kick back safety feature. Designed for fine crosscuts in plywood. C45, 0 degree hook angle, 5,500 RPM. Smoother cut from exclusive plate technology. Reduced cutting force: teeth are face ground/sharpened. Impact resistant. 18-degree hook angle. ATB tooth grind. 7000 RPM.
Thin kerf, .071",  saw blade for circular saws. Innovative heat vents and expansion slots for straighter cuts. Reinforced shoulder for durability. Designed for framing and ripping. Alternate top bevel, 20 degree hook angle. Construction grade carbide teeth for longer life with thin kerf for fast cuts; 400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade. Thin kerf, .045", design cuts more efficiently. Carbide tipped saw blades cut faster and last longer than conventional carbide blades. Heat treated for longer life. Alternative tooth bevel, .071" plate, +15 degree hook angle.
Thin kerf, .094", saw blade for miter saws and table saws. Laser cut stabilizer vents. Durable MicroGrain Titanium Carbide for razor sharp cuts and long life. PermaShield permanent coating prevents gumming and corrosion.  Alternate tooth bevel, .063" plate,  9,000 max rpm. Thin kerf, .095", saw blades are for use with miter saws and table saws. Computer balanced plate reduces vibration for improved accuracy and better finish. Exclusive wedge shoulder for increased durability and accuracy. Used for fine crosscuts in natural wood, plywood and wood composites. Alternate top bevel, +5 degree hook angle, .069" plate. Table and miter saw blade with 60 teeth for fine finish applications. For use on soft and hard wood, ply wood and other building materials. Triple-Sharp Bosch C4 micro-grain carbide teeth provides smooth cuts, excellent finish and long life. Speed Coat finish means less friction and pitch buildup for fast, effortless cutting in treated or wet lumber. Starts sharper and stays sharper. Thin kerf (0.098") design for fast cuts with less waste. Extra hard steel plate with laser body slots for accuracy and smooth, quiet operation. Maximum rpm 6,000.
Thin kerf saw blade for miter saws and table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle. Thin kerf saw blade for circular saws and table saws. Alternate top bevel, .075" plate, .048" kerf, 16 degree hook angle. Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6mm plate, .0.095" kerf.
Thin kerf, .087", saw blade for sliding miter saws and radial arm saws. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable MicroGrain Titanium Carbide for razor sharp cuts and long life. PermaShield permanent coating prevents gumming and corrosion. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .063" plate,  7 degree hook angle. Thin kerf saw blades are for use with miter saws and table saws. Used for fine crosscuts in natural wood, plywood and wood composites. Alternate top bevel, +5 degree hook angle, .097" kerf. Thin kerf, .098", saw blade for for use with miter and table saws. Premium Micro-Grain carbide produces ultra-sharp cutting edges. Dampening Slots reduce vibration. Tough Coat finish reduces heat, friction, and gum. Used for very smooth crosscuts. Alternate top bevel, 6,000 maximum RPM, .071" plate,  kerf, 10 degree hook angle.
For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Designed to do both cross-cutting and ripping. Teeth are arranged in a three or five tooth pattern and incorporate a flat raking tooth after each sequence of ATB teeth. 15-degree alternate top bevel plus raker,  10-degree positive hook angle, .098" thin kerf, 7,000 rpm. Thin kerf saw blade for miter and table saws. Used for crosscutting oak, pine melamine, veneer, plywood and delicate molding. Laser cut stabilizer vents for reduced vibration and precise cuts. Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6mm plate, .0.095" kerf.
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.8mm plate, .095" kerf, 15 degree hook angle. Thin kerf saw blade for for use with table saws. Alternate top bevel, 7,000 maximum RPM, .071" plate, .098 kerf, -5 degree hook angle. Thin kerf saw blade for table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .087" plate, .0118" kerf, 15 degree hook angle.
For use on miter saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Teeth alternate between a right and left bevel to form a knife-like edge on either side for a cleaner cut. 10-degree alternate top bevel, 15-degree positive hook angle, .098" thin kerf, 6,000 rpm. For miter/slide miter and table saw. Non-stick permashield coating. Axial shear face grind tooth geometry..087" ultra thin kerf, 10-degree hook angle, and 7,000 max rpm. Blade is used to cut laminate flooring, double sided laminates, and melamines cleanly. The triple chip grind (TCG) tooth design gives clean, chip free cuts and longer life in abrasives. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable micrograin titanium carbide teeth for razor sharp cuts and longer life. Perma Shield permanent coating prevents gumming and corrosion. Laser cut thin kerf design gives fast clean cuts.
Construction grade carbide teeth for longer life with thin kerf for fast cuts; 400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade. Thin kerf, .098 , saw blade for for use with miter and table saws. Premium Micro-Grain carbide produces ultra-sharp cutting edges. Dampening Slots reduce vibration. Tough Coat finish reduces heat, friction, and gum. Used for ripping, general purpose, and fine crosscutting. Alternate top bevel, 6,000 maximum rpm, .071" plate, 10 degree hook angle. For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Used for extra-fine cross-cutting. High bevel angle increases the knife-like action at the edge of the blade. 30-degree high alternate top bevel, 10-degree positive hook angle, .098" thin kerf, 7,000 rpm.
Thin kerf saw blade for use with miter and table saws. Designed for fine crosscutting. Alternate top bevel, 4,800 RPM, .079" kerf, negative 5 degree hook angle. For miter/slide miter saw. Non-stick permashield coating. Axial shear face grind tooth geometry. .098" ultra thin kerf, 7-degree hook angle, and 7,000 max rpm. For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Cuts hard materials. Teeth alternate between a flat raking tooth and a trapezoid shaped tooth. Triple chip grind,  15-degree hook angle, .098" thin kerf, 7,000 rpm.
For on-the-job cutting of wood, non ferrous metal such as copper pipe, aluminum extrusions, brass plate, plastics and laminates. For miter/slide miter saws. Triple chip grind tooth design. .091" thin kerf, negative 5-degree hook angle and 6,000 max rpm. Triple chip grind (TCG) tooth for clean, chip free cuts and longer life in abrasives. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable micrograin titanium carbide teeth for razor sharp cuts and longer life. Perma shield permanent coating prevents gumming and corrosion. For use on miter saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Used for extra-fine cross-cutting. High bevel angle increases the knife-like action at the edge of the blade. 30-degree high alternate top bevel, 10-degree positive hook angle, .098" thin kerf, 6,000 rpm.
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.8mm plate, .095" kerf, 15 degree hook angle. Thin kerf, .106" , saw blade for circular. Designed for smooth ripping and crosscutting in wood, all building materials, plywood, chipboard, paneling, pressboard and marlite. Provides smooth finish used for woodworking and construction. Alternate top bevel, .060" plate, 14 degree hook angle. For use on miter saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Used for extra-fine cross-cutting. High bevel angle increases the knife-like action at the edge of the blade. 30-degree high alternate top bevel, negative 2-degree hook angle, .098" thin kerf, 6,000 rpm.
For use on miter saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Cuts hard materials. Teeth alternate between a flat raking tooth and a trapezoid shaped tooth. Triple chip grind,  15-degree hook angle, .098" thin kerf, 6,000 rpm. Thin kerf, .116", circular saw blade is designed to give glass-smooth finishes when crosscutting hard and soft woods. Alternate top bevel, 7,000 maximum rpm, .098 plate, +10 degree hook. Thin kerf saw blade for for use with miter and table saws. Alternate top bevel, 7,000 maximum RPM, .071" plate, .098 kerf, -5 degree hook angle.
Thin kerf, .106" , saw blade for circular saws. For woodworking & construction, produces high quality precision  and smooth cuts in all woods. Alternate top bevel, .060" plate, 15 degree hook angle. Thin laser cut kerf provides faster, cleaner cuts. Perma-Shield coating shields blade against heat, gumming, and corrosion. Micrograin titanium carbide tipped teeth are impact-resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth. For corded circular saws. 5/8'' universal diamond arbor. .071'' thin kerf for faster, cleaner cuts. Heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Precision honed C3 tungsten carbide tips hold edge longer. Round shape means each tooth cuts uniform equal amounts of wood. Blade flatness ensures close tolerances. Alternate top bevel grind-20 degree hook angle. Fully hardened plate runs truer longer. Reinforced shoulder for added durability.
   
 
1