Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER CUTTING ACCESORIES
Choose a sub category:
ROUTER BITS - 1/4 IN CARBIDE ROUTER BITS - ARBOR TYPE ROUTER BITS 1/2 IN CARBIDE
ROUTER BIT SETS ROUTER ACCESSORIES SPIRAL SAW CUT-OUT BITS
SPIRAL SAW CUT-OUT ACCESSORIES OSCILLATING TOOL BLADES OSCILLATING TOOL ACCESSORIES
PLANER BLADES & ACCESSORIES
Sort By:
1 2 3 ... 7
Allows Multi-Max accessories (excluding multi-flex) to fit all current oscillating tools from Fein, Rockwell, Bosch, Craftsman, Rigid and more. Sand paper accessory allows the Multi-Max to sand paint, varnish, filling compound on a variety of surfaces. Includes two each of 80, 120 and 240 grit. Requires MM11 Hook and Loop pad accessory (784.7205).  Use with 122.5929. Sand paper accessory allows the Multi-Max to be used for sanding hardwood, softwood, chipboard, rusted metal, fiberglass and plastics. Includes two per pack of 60, 120 and 240 grit. Requires MM11 Hook and Loop pad accessory (784.7205). Use with 122.5929.
MASONRY ZIPWHEEL
Our Price: $4.34
Adapts Universal Fit accessories to fit onto prior model Sonicrafter tool with hex interface. Universal fit system allow accessory to fit all major brand oscillating tools. Replacement flange for the SoniCrafter tool. Includes: screw, flange and allen key. This cut off wheel is the most versatile cutting wheel and can tackle difficult materials such as brick, concrete, ceramic wall tile to fiberglass including untempered masonite, non-ferrous metals, aluminum to bronze, works with all new RZ model spiral saws.
WINDOW/DOOR DRYWALL BIT
Our Price: $4.42
Constructed from high speed steel with a cutting depth 1", used for window and door cutouts, Constructed from carbide with a cutting depth of 1", used to cut ceramic tile, cement board, stucco, and plaster. Carbide tipped razor sharp cutting edges are diamond honed for satin smooth cuts.
Slotting cutter arbors will work with any slotting cutter with a 5/16" arbor. Use on hand held and table mounted portable routers. Slotting cutter arbors will work with any slotting cutter with a 5/16" arbor. Use on hand held and table mounted portable routers. Constructed from high speed steel with a shank of 1/8", cuts all types of wood, wood composites, fiberglass, solid surface materials, vinyl and aluminum siding, plastic and laminates.
METAL ZIPWHEEL
Our Price: $5.42
Cut off wheel cuts ferrous and non-ferrous metals such as, steel, iron, pipe, tubing, angle iron, sheet metal, aluminum, works with all new RZ model spiral saws. Conversion kit allows you to change 1/4" collets to accept 1/8" bits on RotoZip tools. Includes: adapter, hex wrench, guidepoint bit and sabrecut bit. Rigid oscillating blade for scraping. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
Top ball bearing carbide tipped razor sharp cutting edges are diamond honed for satin smooth cuts. Edges are diamond honed for smooth cuts. Optimized hook and shear angles. Precision ball bearings with dust shields. Triple tempered shanks. Made of high speed steel with a cutting depth 1-1/2 ", used for basic drywall cut-outs, when a slower, controlled cut of outlet boxes in drywall is needed.
Flush cut blades are used to make precise cuts and plunge cuts. May be used on non-ferrous metals, wood, plastic, drywall and other soft materials in applications such as cutting doorjambs or windowsills, for flooring or tile installation, sawing off water pipes (copper) and 6d-8d finishing nails. Use with 122.5929. Used for removal of stubborn paint, adhesive residue, carpet, tile adhesive and undercoatings. Carbide tipped. Razor sharp cutting edges are diamond honed for satin smooth cuts. Optimized hook and shear angles for faster chip clearance and quicker feed rates. Precision ball bearings with dust shields for long lasting performance. Triple tempered shanks for maximum durability. Applications: Cuts Laminates, Plywood, Paneling & Other Materials.
Blade is used for making precise cuts in wood, plaster, drywall material in such applications as cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes; can also be used for window restoration to remove glazing. Use with 122.5929. Allows the Multi-Max oscillating tool to accept sand paper and diamond paper. Quick-fit design allows for fast accessory changes. Compatible with all dremel multi-max tools. Made of high speed steel with a cutting depth of 1" and shank size of 5/32", used for cutting drywall. 2 per card.
For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools. For removing elastic sealants, paint adhesive residues, wallpaper, worn gaskets, etc. Cuts carpet, leather, linoleum and similar materials. Universal fit system allow accessory to fit all major brand oscillating tools. Self-piloting bit makes flush, trim and edge cuts.
ROTOZIP DRYWALL BIT
Our Price: $6.73
For controlled drywall cut-outs around electrical boxes and framing, 1/8" shank. Constructed from high speed steel with a cutting depth of 1" and a shank of 5/32", for use with cut out tools. For dovetail joint applications. Cutting edges are precision-ground for extra smooth cuts.
Cuts rounded grooves used in a variety of applications ranging from doors to columns. For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools.
For general purpose plunge cutting up to 1-1/4" depth in non-metal materials like wood, plastic and drywall. Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work. Holds sanding sheet for detail sanding in very small areas, openings and corners. Use on wood plastic and hardened fillers.
SPIRAL BLADE KIT
Our Price: $7.56
FLAT BLADE KIT
Our Price: $7.56
Flexible scrapers are used for hard to reach areas and removal of soft materials such as caulk. Make sure the blade is flexed during the scraping process. A 30 to 45 degree pitch is recommended. Use with 122.5929. For coping wood trim, crown molding and baseboards and the general cutting of detailed areas and intricate parts. Includes three spiral blades. For straight cutting of a variety of materials including wood, PVC and copper pipe. Includes three straight cutting blades.
CARBIDE SANDER KIT
Our Price: $7.56
For general filing and detailed sanding of small intricate parts. Includes one carbide wire. Used for precise cuts and plunge cuts. Designed for cutting wood, drywall, plastic, and soft metal. Applications include flush cutting doorjamb or windowsill, for flooring or tile installation. 1-1/4" depth of cut. Works with all RotoZip spiral saws, and drywall routers. Kit includes 1/8", 5/32", and 1/4" collets and collet nut.
Multi-material cutting blade is ideal for cutting asphalt shingles. Compatible for Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. Adapts most competitive accessories to be used on the SoniCrafter. Constructed from carbide with a cutting depth of 1", used to cut ceramic tile, cement board, stucco, and plaster.
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
Self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cut all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate. 9-degree angle. Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-1/4" depth on wood and soft plastics. Universal fit system allow accessory to fit all major brand oscillating tools. For plunge cutting up to 3/4" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. For door front grooving , lettering and sign work. Shear angle cutter geometry for smooth, efficient cutting.
Use the hinge mortising template for mortising door and jamb for 3-1/2" and 4" butt hinges. Includes templates for the two most popular interior and exterior hinge sizes. NOTE: Requires use of 5/8" router guide bushing (not included) Large area removal of harder materials such as vinyl flooring and bonded carpeting or scraping off coats of paint, varnish or adhesives. Blade is 5.5"x3.9". Use with 122.5929. Fast cutting bit for making mortises when work is started at the edge. Smooth finish makes this bit ideal for surfacing operations. Also used when good chip clearance is important in material such as gummy wood.
Designed for roughing operations where high production feed rates are essential. Optimum chip clearance. Specifically designed for fast plunge cutting. For detail sanding in small areas and corners. Use with extraction attachment for dust removal. Use on wood, plastic and hardened fillers. Perforated. For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools. Cuts rounded grooves used in a variety of applications ranging from doors to columns.
   
 
1 2 3 ... 7