Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER CUTTING ACCESORIES > ROUTER BITS 1/2 IN CARBIDE
Sort By:
1
Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
Micrograin bits designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Positive hook angles cut efficiently while specially designed tips provide fast plunge cutting. Strong webbing and heavy cutter backing extend bit life. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Micrograin bits ideal for fast, smooth, accurate trim cuts with a shielded, compact 1/2" ball bearing pilot. Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work. Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. 1/2" bearing, 3/8" rabbet Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter. Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
Micrograin bits used for smooth, uniformly rounded edges. A lower depth setting produces a rounded corner with a decorative bead. 1/2" bearing diameter Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 3/8" bearing diameter. Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge.
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter. Micrograin bits designed to cut tongue and grooves on 1/2" through 3/4" thick material. To cut the tongue, use the complete assembly; to cut the groove, remove one slotting cutter. 1/2" decorative cut depth. Recommended for use with a router table. Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. Comes with interchangeable bearings to cut the following depths: 1/8 ",1/4", 5/16", 3/8", 7/16" and 1/2".
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter. Produces perfectly fitted tongue and groove joints. Opposing shear angles of the tongue cutter ensures flawless finish. Adjustable for stock thickness of 1/2"  to 1-1/4" and groove widths of 7/32" to 3/8". Cut all composition materials, plywood, hardwood, and softwood. Use on table mounted portable routers.
Produces locking miter joints. Run one board vertically and run the piece to be joined horizontally. Cuts all composition materials, plywood, hardwood, and softwood. Use on CNC and other automatic routers as well as table mounted portable routers.
   
 
1