Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > PNEUMATIC NAILERS
Choose a sub category:
PNEUMATIC FRAMING NAILERS PNEUMATIC FINISH & BRAD DRIVE PNEUMATIC COIL NAILERS
PNEUMATIC STAPLERS PNEUMATIC CAP STAPLERS & NAILE MANUAL FLOORING NAILERS
PNEUMATIC FLOORING NAILERS PNEUMATIC HAND/PALM NAILERS CORDLESS NAILERS
PNEUMATIC TOOL ACCESSORIES
Sort By:
1 2
Spring loaded and retractable. Solid steel with durable zinc plating. Keeps tools close by. For Use With: Hitachi: NR90AE, NR90AD; Stanley Bostitch: N88RH-2. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild Kit for N66C Model (630.2483). Fits N50, N55, N57, N60, N63, N65, N70, N80, N86, N90; Also N100, 650, 750, 850, 863, T55, T60, RN45, N95RHN. Kit includes: Bostitch TVA6 trigger assembly ,Valve assembly , Lubricant , Two orifice caps. Spring pin punch, Complete instructions.
Contains all o-rings necessary to rebuild the F21, F8, F33, N89C tools. Does not include trigger valve or trigger valve o-rings. Replaces worn or broken trigger valve for Stanley Bostitch Nos.N52FN, N62FN, N79RH, N79WW, N80SB, N88WW, N88PC, N90PT, N95RHN nailers. Kit includes: TVA11, Roll Pin., and Lubricant. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the: S32, BT35, BT50.
All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the:  N80, N90 . All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild kit for No.RN46 (225.1452) . All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced making a tool in otherwise good condition 'like new'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the:  RN45.
Safety Mechanism prevents accidental firing. Quick release magazine for easy loading. Adjustable air exhaust, stapler viewer. Specs: 100 staples capacity, 60 to 100 PSI,  H-8.9" x L-8.1" x W-2.2". Tool Weight: 2.9 lbs. Fastener Specifications: Drives 1/4" thru 9/16" Surebonder No.4 Heavy-Duty Staples (same as Arrow T50), 1/4", 5/16", 3/8", 1/2", 9/16" Staple Lengths.  Includes: High-Impact Carrying Case. Contains all o-rings necessary to rebuild the:  N88 series of tools. Does not include trigger valve or trigger valve o-rings. Lightweight, compact design provides versatility and the precision necessary for both construction and home repair projects; features a sturdy blow-molded case, replacement oil and 2 hex wrenches for easy tool maintenance and storage; adjustable exhaust cover directs air away from user; easy-load magazine for quick loading; bump fire capability for fast firing; maximum pressure: 120psi.
All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the:  T40, T50, N50FN, N60FN. Rubber grip designed to insulate and reduce vibration; 360 degree swivel air fitting for maximum accessibility. Front exhaust directs air away from users palm. Fastener Specifications: Drives Most Common Bulk Finish, Framing & Timber Nails. Powerful enough to drive bulk nails into joist hangers, hurricane straps, fencing,  or decking. Fifty percent lighter than traditional palm nailers and is ideal for exceptionally tight spots. Specifications; Reg. Operating Pressure: 60  to 110 psi (4.0  to 7.6 bar) Air Consumption: 2 - 4 scfm; Length: 2 3/4" (69.9 mm); Width: 2" (55.6 mm). Fastener Specifications: Drives 2" - 3-1/2",  6d to 16d Bulk Nails.  Includes Wrench; Tool Oil Required;  Aluminum Housing & Rear Exhaust.
Control the depth of drive in various types of wood with 2-in-1 magazine. Quickly remove nail jams to reduce downtime. No-mar tip will not dent the work surface. Specs: Weight: 7.50 lb.; Length: 13.50" Width: 3.25"; Height: 12.50". ; 0.8 SCFM at 90 PSI; 60 to 100 max PSI; Magazine Capacity: 100 n/s. Fastener Specifications: Drives 18 GA Brad Nails & 1/4" Crown Staples, 1/2" to 1-1/4" Length. Includes 1-1/4"  Brad Nailer; 1/4" Crown Stapler; (1000 EA) 1" Brad Nails, 1" Staples; 1/4" Industrial Plug; 1/4" NPT, (2) Allen wrenches, Nailer Oil, & High Impact Carry Case. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit.  Rebuild kit for BT200 model. Fits into the palm of the hand making it ideal for joust hangers, metal straps, and pole barn assembly. Leather grip  with soft rubber palm pad reduces fatigue. Magnetic nail guide for faster and easier driving. Specifications:  50 to 125 PSIG; Height: 4.8125"; Weight: 2.5 lbs. Fastener Specifications: Drives Bulk Nails from 5d to 70d. Includes: Leather grip.
Extremely lightweight and well balanced. Additional features include a tool-free adjustable depth of drive, selective trigger for sequential or bump fire operation, and reload indicator to prevent dry firing. Specs: Magazine Type: Straight; Nail Capacity: 100; Operating PSI: 70-120; H: 9-3/16" x L: 10" x W: 2-3/8"; Weight: 2.2 lbs. Fastener Specifications: 18 Gauge Brad, Nail Length, 5/8"To 2". Includes: Plastic Carrying Case, Air Fitting, Safety Glasses, Hex Wrenches, & Non-Marring Tip. New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 degree adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Specs: Weight: 2.2lbs.; Size: 10-11/32" L x 9-1/8" H x 2-3/8W; Air pressure (PSI): 70-120; Magazine Type: Steel; Nail Loading Type: Top; Firing Mode: Single-Contact-Selector; No Mar Tip: Yes; Depth Adjustment: Yes; Adjustable Exhaust Port: Yes; Jam Clearing: Yes; Oil-Free: No; Rubber Grip: Yes. Fastener Specifications: Nail Range- 1/2" - 1-1/2"; Staple Capacity: 125. Includes: Safety Glasses; Case; No-Mar Tipx2. Quick-release nose piece for clearing of jams. Strong and lightweight die-cast aluminum body. Anodized magazine with visual reload indicator. Safety control located behind driver guide for driving brads in tight spaces. Depth adjustment for exact setting of nail head. Removable rubber nose protects delicate work. Directional exhaust port. Features driver 18 Ga brads, 1/4" male fitting, 5/8"-1-1/4" fasteners, front exhaust and oil.
Magnesium body provides durable  and ultra light tool for comfortable extended use. Oil free motor eliminates oil carryover onto the work surface. Selectable trigger lets you control the fastening method with a flip of the switch. Rotatable rear exhaust and belt hook keeps dust and debris off work surface. Specs: Height: 9.1"; Length: 10"; Weight: 2.9 lb; Reg. Operating Pressure: 70-120 psi (4.8-8.3 bar); Mode of Operation: Sequential Actuation. Fastener Specifications: 18 Gauge, 5/8"-2-1/8" Brad Nails. Includes: Case; fitting,Oil, & Hex Wrench. Selectable trigger controls. Magnesium body with oil free motor eliminates oil carry over onto the work surface, metal cylinder for increased durability. Rotatable rear exhaust and belt hook  Specs: Height: 9"; Length: 10"; Weight: 2.9 lb; Reg. Operating Pressure: 70-120 psig (4.8-8.3 bar); Mode of Operation: Contact or Sequential Actuation. Fastener Specifications: 18 Gauge, 1/4" Crown, accepts  3/8"-1-5/8" length staples. Includes: Case & Plug. Oil-free operation requires no regular maintenance and eliminates the risk of oil stains. Lightweight magnesium design for added durability. Reversible belt hook with integrated pencil sharpener. Selectable trigger system converts from sequential to contact operation. Ultra-quiet rear exhaust, 'Dial-A-Depth' control, low nail lockout,and swivel air fitting with internal filter. Weight: 2.7 lbs; Driving Power: 160 in-lbs.; Magazine Capacity: 110. Fastener Specifications: 18 GA Brads (5/8" to 2-1/8"). Includes: Brad Nailer; 1/4" Swivel Fitting; (1,000)  2" Brads; Carrying Case; Hex Wrench & Belt Hook.
Ideal for framing or remodeling; drives common bulk nails in confined areas and nails metal connectors or joist hangars. Magnetic nose with recessed nail slot holds nails stable for accurate fastener placement. Hardened steel nose . Specs: 70 to 100 PSI;  1/4" NPT; Height: 5-1/4"; Length: 4-1/8" ; Width: -1/2";  Weight: 2.9 lbs. Includes: Impact Nailer with Standard Nose; Finish Nail Nose; Large Bore Nose; Leather Comfort Glove; Nose Wrench; Hex Wrench; Tool Lubricant and Spare O-Rings. Lightweight magnesium, low nail lockout, 'Dial-A-Depth' control, and reversible belt hook with integrated pencil sharpener. Oil-free operation requires no regular maintenance. Selectable trigger system converts from sequential to contact operation. Swivel air fitting with internal filter. Ultra-quiet rear exhaust with muffler. Specs: Magazine Capacity 100 Staples; Weight: 3 lbs; Driving Power: 160 in-lbs. Fastener Specifications: 18GA SX Narrow Crown Finish Staples (1/2" to 1-1/2"). Includes: Finish Stapler; 1/4" Swivel Fitting; (1,000) 1" Finish Staples; Carrying Case; Hex Wrench & Belt Hook. Oil-free, built-in laser with anti-dry fire to prevent damage to your surface. Three position switch is easy to change from bump to sequential mode. Quick clear latch. Swivel plug. Bubble level shows if your tool is plumb. Rear exhaust. Tethered no mar tip prevents damage and easily connects to the nailer. Specs: 0.3 avg SCFM at 90 PSI at 10 nails per minute. Fastener Specs: drives 18 gauge, 5/8 inch to 2 inch nails. Includes convenient storage bag, batteries and starter set of nails.
Drives both 18-gauge brads and narrow crown finish staples for ultimate versatility. Adjustable depth guide sets nails to desired depths quickly and conveniently. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Height: 8.5"; Length: 9.25"; Width: 2"; Weight: 2.6 lbs; Driving Power: 135 Inch Lbs.; Magazine Capacity: 100 Brads or 100 Staples; Operating Pressure: 70-100 PSI; Thread Fitting Type: 1/4" NPT. Fastener Specifications: Range: 5/8" - 1-5/8" 18GA brads, (100)  1/2" to 1-1/2" 18 Gauge Staples. Kit includes: Nailer, 1/4" Air Fitting, 1,000 2" Brad Nails, 1,000 1" Staples, Carrying Case, Hex Wrench, Extra No-Mar Tip and Oil. Adjustable high/low power control sets pin depth without changing compressor setting. Low profile nosepiece tapers down to contact point. Lightweight, durable aluminum housing. Overmoulded grip. Rear Exhaust. Specs: Weight: 2.5 lbs.; Driving Power: 60 Inch Lbs.; Operating Pressure: 70-120 PSI; Thread Fitting Type 1/4" NPT; Magazine Capacity: 200 Pins. Fastener Specifications: 1/2" to 1 3/16" 23GA Headless Pin Nails. Includes: Pin Nailer; 1/4" Air Fitting; (500 Each): 1/2" Pins, 3/4" Pins, 1" Pins, & Case. Industrial magnetic collet, 6D -16D, securely holds framing nails for one-handed use, all metal gear housing handles tough jobsite conditions, palm style ergonomics for superior comfort and control, LED light illuminates work surface, works with both M12 batteries and 25+ M12 tools. Specs: 2700 BPM, Blow Energy  2.2 ft/lbs, collet capacity  6D-16D, 6.5" H x 7.5" L x 2.5" W, weighs  3.4 lbs, magnetic tip, Includes: palm nailer, M12 red lithium battery, 30 minute charger, hand strap and tool bag.
Contact or Sequential Actuation. Adjustable depth-of-drive and exhaust. Belt hook,full soft grip with no-mar pad and rear bumper. Available in dual action or restrictive fire. Specs: Height: 10.6"; Length: 12"; Weight: 4.0 lb; Reg. Operating Pressure: 70-120 PSIG (4.8-8.3 bar); Fastener Specifications: Gauge: 16; Fastener Range: 1-1/4"- 2-1/2", Finish: Galvanized. Includes: Case, Fitting & Oil. Magnesium main body; durable and ultra light. Oil free motor eliminates oil carryover onto the work surface. Selectable trigger lets you control the fastening method with the flip of a switch. Adjustable depth of drive. EZ-Clear latch. Rotatable belt hook and exhaust. Includes case, swivel plug and wrench. Oil-free operation requires no regular maintenance and eliminates the risk of oil stains. Selectable trigger system converts from sequential to contact operation. Low nail lockout prevents dry firing. Swivel air fitting with internal filter, ultra-quiet rear exhaust. Reversible belt hook with integrated pencil sharpener. 'Dial-A-Depth' control for precise countersinking. Lightweight magnesium design for added durability. Quick release nosepiece for fast and easy jam clearing. Specs: Weight 3.9 lbs; Driving Power 285 in-lbs.; Magazine Capacity: 100 Nails; Fastener Specifications: 16GA Finish Nails (1-1/4" to 2-1/2"). Includes: Finish Nailer, 1/4" Swivel Fitting;  (1,000) 2" Finish Nails, 4 Profile Tips, Carrying Case, Hex Wrenches & Belt Hook.
Extra power for use in hard woods. Durable hardened alloy steel driver with rear exhaust, smooth metal cap, and easy fastener length adjustment. Easy-open latch,for quick and comfortable loading, soft grip handle plus low load alert. Specs: Height: 6-3/4"; Length: 8-7/8"; Weight: 2.35 lbs.; Reg. Operating Pressure: 70-110 psi; Mode of Operation: Single Actuation, Magazine Capacity: 110 pins. Fastener Specifications; Gauge: 23; Minimum Length: 1/2", Maximum Length: 1"; Finish: Galvanized. Includes: Case; Fittings; Repair Tools; Oil & Fastener Rebate. Oil-free operation requires no regular maintenance and eliminates the risk of oil stains. Lightweight magnesium design for added durability. Adjustable depth guide sets nails to desired depths quickly and conveniently. Tool-free removable magazine for fast cleaning and jam clearing. Specs: Height: 11.63"; Length: 140.69"; Width: 3.13"; Weight: 3.8 lbs: Driving Power: 400 Inch Lbs.; Magazine Capacity: 130 Nails; Operating Pressure: 70-120 PSI; Thread Fitting Type: 1/4" NPT. Includes: Finish Nailer; (1,000) 2" Nails; Carrying Case; Hex Wrenches and Four Profile Tips. Uses DA type finish nails. Rear exhaust directs air away from the user. Integrated air blower allows user to clear debris from work-surface. LED work-light for working in closets and dark spaces. Selectable trigger with safety lock-out allows choosing between single and multiple fastener drive mode. 16" OC gauge flips out to measure 16" from end to nose for running baseboard (patent pending). Oil-free operation, dial-a-depth adjustment, tool-free jam release, adjust belt hook, swivel fitting, pencil sharpener and 6 no-mar tips (4 with profiles).
Integrated air duster button allows air from the compressor to clear away dust and debris from the work surface in preparation for the nail. Selective actuation switch lets the user easily select bump fire or sequential fire modes. Tool-less, easy-to-clear nose for quick and simple nail extraction, should a nail jam during use. Depth of drive dial allows the user to easily adjust the drive depth for a professional finish. Specs: Fastener Type16-Gauge Finish; Magazine Angle: Straight; Magazine Capacity: 100; Magazine: LoadingTop; Operating Pressure: 70-120 psi; Jam ClearingTool-Less; Actuation Selective: (Sequential/Bump Fire); Tool Length: 11-5/8"; Tool Width: 2-27/32"; Tool Height:10-7/8"; Tool Weight: 3.7 lbs; GripRubber. Fastener Specifications: Fastener Length Capacity: 1"- 2-1/2";  Fastener Diameter Range: 16-Gauge. Included: Safety Glasses; Tool Fitting; No-Mar Tip; Case. Integrated air duster button allows air from the compressor to clear away dust and debris from the work surface in preparation for the nail. Selective actuation switch lets the user easily select bump fire or sequential fire modes. Tool-less, easy to clear nose for quick and simple nail extraction should a nail jam during use. Depth of drive adjustment for accurate nail depth in varying materials. Specs; Actuation Selective (Sequential/Bump Fire); Air Consumption: .042(FT3/Cycle at 100psi); LxWxH: 13-17/32" x 3-7/32" x 11-31/32"; Tool Weight: 4.4lbs; Air Inlet 1/4"; Operating Pressure 70-120 psi; Exhaust Deflector:360-Degree Adjustable; Jam Clearing:Tool-Less; Depth Setting:Tool-Less; Magazine Angle: 34-Degrees; Nail Capacity: 100; Magazine Loading: Rear; Fastener Specifications; Fastener Type: 15-Gauge Finish; Fastener Length Capacity: 1-1/4" - 2-1/2"; Fastener Diameter Range: 15-Gauge. Included: Safety Glasses; Case. Rental Lightweight easy maneuvering and all day work. Comfort and convenient features include: overmold comfort grip, overmold trigger, on-tool power adjustment, 360 degree adjustable exhaust, and belt hook. On-tool power adjustment to lengthen the life of the tool when used primarily with shorter fasteners. Wrenches onboard to make the adjustment fast and easy. No lubrication required. Specs:Height: 10"; Length: 10"; Weight: 2.7 lbs; Reg. Operating Pressure: 70?120 psig (4.8?8.3 bar); Mode of Operation: Sequential Actuation. Fastener Specifications: Drives Slight & Medium Head 18 Gauge Brads from 5/8" - 2-1/8". Includes: Carrying Case & 1 Wrench.
Lightweight and comfortable magnesium housing. Redesigned with new long life driver, new main body with improved durability, improved trigger ergonomics and reduced trigger reach. Thumb wheel adjustable depth-of-drive, comfort grip and NeverLube technology, no lubrication required. EZ-Clear latch clears jams fast. Two No-Mar pads with onboard storage to protect work materials. 360-degree adjustable exhaust. Construction ruler for quick measurements. Advanced belt hook provides easy and convenient storage. STANDARD EQUIPMENT:  2 no-mar pads, belt hook. SPECIFICATIONS:15-gauge, Brad head finishing nails. 1-1/4" to 2-1/2" fastener range. Finish: Bright basic, galvanized and stainless. 100 nail capacity. Sequential actuation (restrictive),  70 to 120 psig reg. operating pressure. 11-5/8" H x 13"L. 4.0 lbs. tool weight. 3-1/4" paper tape framing nailer. Well balanced, ergonomic design. Highly efficient internal design, means less wear and tear on the compressor. Dry fire lockout. reduced jams and mis-feeds. TrueDrive magazine and aggressive toenail safety. Fits easily between studs and joists. Retractable rafter hanger. Contract or sequential trigger actuation. Fastener capacity: 83, shank diameter: .113" - .148", range: 2" - 3-1/4", collation: 34 degrees angled tape strip. Nosepiece probe locates metal connector holes providing accurate nail placement. Lightweight and well balanced. Dry-fire lockout. Powerful enough to drive through engineered lumber. Adjustable rafter hanger.  Fastener capacity: 20, Shanks: .131"-.162", Range: 1-1/2"-2-1/2", Collation: 34 degree paper tape strip. Tool-free adjustable exhaust deflector.
High visibility tongue engagement for faster installation and non-marring profile tips to prevent floor scratches. Adjustable knobs allow for tool-free adjustment from 1/4"-1/2" flooring, oil free operation requires no regular maintenance, swivel air fitting with internal filter improves maneuverability and ultra quiet rear exhaust directs air away from the user. Specs: capacity 125, 122 in-lbs. driving power , fastener info Crown Length 1", gauge 20, weighs 2.9 lbs. Aluminum housing. Adjustable depth of drive. Over-mold comfort grip. Easy Clear Jam Clearing with 360 degree adjustable exhaust. Tool oil required. Specs: Height: 10 3/4"; Length: 15"; Weight: 4.6 lbs. lb( 2.09 kg kg); Reg. Operating Pressure: 80-120 psig (5.5 ? 8.3 Bar bar); Mode of Operation: Contact Actuation.. Fastener Specifications: Drives 16 GA, 7/16" Crown, Staples from 1" to 2" in Length. Push button adjustable depth guide sets nail to desired depths quickly and conveniently. Notched 16" layout indicator on magazine helps achieve correct distance between studs in a matter of seconds. Lightweight magnesium design for added durability. Adjustable rafter hook allows users to hang tool on rafters and joists. Specs: Height 14-1/4"; Length 20"; Weight 7.6 lbs.; Driving Power 1050 Inch Lbs; Operating Pressure 80-120 PSI; Thread Fitting Type 1/4" NPT. Fastener Specifications: Fastener Gauge .113 - .131; Fastener Range 2" to 3 1/2" 28 degree Wire Collated Stick Framing Nails; Magazine Capacity: 100 Nails
Push button adjustable depth guide sets nails to desired depths. Lightweight magnesium design for added durability; 16" layout indicator on magazine helps achieve correct distance between studs in a matter of seconds. Recommended tool for use with HurriQuake disaster-resistant nails. Specs: Power-to-Weight Ration 1,050 in/lbs; Weight 8.1 lbs, 3.67 kilos; Driving Power 1050 inch/lbs.; Thread Size 1/4" NPT. Fastener Specifications: Fastener Gauge; .113" -.162" diameter; Fastener Range; 2" - 3-1/2"  21 Degree Plastic Collated Framing Nails; Magazine Capacity: 60 Nails. Low profile design for getting in between rafters and in tight spaces. Tool free selectable trigger allows for single drive (sequential nailing) or multi drive (bump nailing) modes with the flip of a switch. Tool free depth of drive adjustment designed for precise sinking of fasteners. Internal air filter protects engine from harmful contaminants such as dirt and debris. Adjustable rafter hook designed so end users can use both hands when needed. Last nail retention magnet prevents last nail from dropping out of the nose. Also features a no-mar tip to prevent damage. Low tool weight at only 7.6 lbs helps reduce user fatigue and an over molded grip provides all day comfort and a secure grip. Delivers power of 840 in-lbs at 100 psi with a fastener range of 2" - 3-1/4". Magazine capacity 92. Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications. Patented push button adjustable depth guide sets nails to desired depths. Lightweight magnesium design for added durability. Adjustable rafter hook allows users to hang tool on rafters and joists. Specs: Height 14"; Length 18"; Weight 7.9 lbs; Driving Power: 1050 Inch Lbs.; Operating Pressure: 80-120 PSI; Thread Fitting Type: 1/4" NPT. Fastener Specifications: Fastener Gauge Framing: .113"-.162" Diameter; Metal Connector Nails: .131"-.162" Diameter; Fastener Range Framing: 2" to 3 1/2" 33 degree Paper Collated Stick Framing Nails; MCN: 1 1/2" to 2 1/2" Metal Connector Nails; Magazine Capacity: 80 Nails.
Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications. Patented push button adjustable depth guide sets nails to desired depths. Lightweight magnesium design for added durability. Adjustable rafter hook allows users to hang tool on rafters and joists. Specs: Operating Pressure: 80-120 PSI; Thread Fitting Type: 1/4" NPT.; Weight 8.1 lbs, 3.67 kilos; Driving Power 1050 Inch Lbs. Fastener Range Framing: 2" to 3 1/2" 21 degree Plastic Collated Stick Framing Nails; Fastener Gauge Framing: .113"-.162" Diameter;  Metal Connector Nails: 1 1/2" to 2 1/2"; Metal Connector Nails: .131"-.162" Diameter; Magazine Capacity 60 Nails. Brad nailer has adjustable, depth-of-drive control, exhaust with belt hook, soft grip, no-mar pad and rear bumper. Compressor is easy to carry and to use in a wide variety of applications. Specs: Nailer, 18 gauge; Height: 9.3"; Length: 9.75"; Weight: 3 lb; Reg. Operating Pressure: 70-95 psig (4.8-6.5 bar); Mode of Operation: Sequential Actuation. Fastener Specifications: Drives 18 gauge brad nails from 5/8"-2";  Compressor, Height: 10.3"; Length: 14"; Width: 12.5"; Weight: 20 lb; Recovery Time: 35 seconds; Pump Up Time: 128 seconds; CFM (100psi): 0.6; Horsepower: 1; Powersource: Electric; Tank Storage: 1 gallon gallons; Max Amp at 115V: 4. Compact design fits between 12" OC joists. Low nail lockout prevents dry fires. Exclusive safety system prevents misfires. Exposed nail tip design fires in the hole for faster, more precise nailing. Specs: Height 10-1/2"; Weight: 4.6 lbs.; Driving Power: 450 Inch Lbs. Magazine Capacity 29 Nails; Operating Pressure: 80-120 PSI; Thread Fitting Type: 1/4" NPT. Fastener Specifications: Drives 1-1/2" paper tape collated metal connector nails (.131" - .148" diameter).
Lightweight and well-balanced for easy maneuverability. Tool free depth of drive adjustment to flush drive or countersink into varying material. Selective actuation for either sequential or 'bump' fire nailing with a simple flip of a switch for tool-less transitions. Specs: Weight: 7 lbs.; Air Inlet:3/8"; Operating Pressure 70-120 PSI; Air Consumption at 100 PSI.09 scfm; Depth Adjustment Tool-less; Actuation Selective; Jam Clearing; Open Nose: 18.2L" x 4.9W" x 12.7H". Fastener Specifications: Fastener Type: Paper Tape Collation; Magazine Capacity: (.131)86 Nails; Magazine Loading: Rear; Magazine Angle: 35 Degrees; Fastener Length: Capacity 2in. - 3-1/2in.; Fastener Diameter: Range.113 - .148. Included: Safety Glasses. Lightweight and well-balanced for easy maneuverability. Tool free depth of drive adjustment to flush drive or countersink into varying material. Selective actuation for either sequential or 'bump' fire. Nails with a simple flip of a switch for tool-less transitions. Specs: Air Inlet: 3/8"; Operating Pressure: 70-120 psi; Air Consumption at 100 PSI.09 scfm; Depth AdjustmentTool-less; Actuation Selective; Jam Clearing Open Nose; LxWxH 20.8"x 4.9",x 7.5"; Magazine Loading: Rear. Weight: 7-1/2 Lbs. Fastener Specifications: Accepts 2" to 3-1/2" Plastic Collated Framing Nails; Fastener Diameter Range; .113"-.148"; Magazine Angle: 21 Degrees; Nail Capacity: 64 Nails. Included: Safety Glasses.. Drives 2"  - 3-1/2" x .113" - .148" framing nails. Low profile at only 12" height gets in-between tight framing studs. Lightweight at only 7.3 lbs. Drives into engineered lumber. Depth control for precise fastener placement. 92 nail magazine capacity. 840 in-lbs power.
Drives 2" - 3-1/2" x .113" - .148" framing nails. Low profile at only 12" height gets in-between tight framing studs. Weighs 7.3 lbs. Drives into engineered lumber. Depth control for precise fastener placement. Selectable trigger for easy change between single and multi drive mode. Includes adjustable rafter hook. 840 in-lbs power. Zero nail lockout feature eliminates dry firing and indicates when to reload the magazine. Nosepiece features carbide inserts for long-life performance. Aggressive wear guards and skid pads protect the tool from damage on abrasive surfaces. Patented, single-action, side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing. Specs: Load capacity: 120 nails; Drive Power: 410 inch-lbs.; Power to Weight Ratio: 85; Tool Weight: 4.8 lb. Fastener Specifications: 3/4" to 1-3/4" 15-degree wire-collated roofing nails. Lightweight, ergonomic design with a comfort-grip handle. Adjustable depth-of-drive and aluminum sleeve and piston. No-mar pad. Oil-free design means easier maintenance and no lubrication. Muffler ensures quiet operation Specs: 70 to 120 PSIG; 9"H x 12"L.; Tool weight: 2.7 lbs.; Staple Capacity: 145 to 168. Fastener Specifications: Drives 18 GA, 1/4" & 3/8" Crown,  3/8" to 1-1/2" leg, Senco L Series Staples.
2" 7/16" crown. Innovative magazine removal mechanism maintains a clean, narrow line of sight for precise staple placement. Well balanced, ergonomic design for all day use. 1" lip length allows access into tight corners. Durable all-metal magazine construction. Precision machined drive tank ensures accurate, jam free staple drives. Adjustable depth of drive and belt. Adjustable depth of drive with internal air filter, belt hook, selectable trigger operation converts from sequential to contact operation. Specs: 170 in/lbs driving power, magazine capacity is 160 staples, weighs 3.9 lbs. Uses: 18 ga, 5/16" crown, 1/2"-1-1/2" long staples. Includes: stapler, 1/4" swivel air fitting, 1,000 1" SL Staples, 1,000 Bostitch caps. For installing 1/2", 5/8" and 3/4" hardwood floors. Selectable drive mode to choose between single or multi-blow options. Graphite mallet with ergonomic comfort grip. Rubber bumpers protect pre-finished floors against marring. Specs: Weight 8.6 lbs; Magazine Capacity: 120 Cleat Nails; Fastener Specifications: Drives 1-1/2" to 2" Bostitch 'L' Shaped Hardwood Flooring Cleats. Includes: Flooring Nailer; Mallet; Flooring Adaptors (for 1/2" & 5/8" flooring); Flooring Hex Wrenches & Contractor Carrying Case
   
 
1 2