Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > AIR TOOLS
Sort By:
1 2
Used to secure chisels to air hammer without making changing chisels slow or difficult. Round. Fits die grinder with with 1/4" collet No.EW-012 (SKU 458-7671). 25,000 RPM max.
For 3" air cut-off tool No.EW-148 (SKU 805-3043). 25,000 RPM max. For 6" dual action air sander No.EW-480 (SKU 956.3115). 25,000 RPM max, black.
1/4" die grinder (Grinding Wheels Not Included). 4 cfm's at 90 psi. Minimum hose diameter is 3/8". Uses 1/4" and 1/8" collets. Die cast body and dial type gauge with rubber protector. Fitted with single clip-on connector. Air pressure: 0-220 PSI. Air inlet: 1/4'' NPT. Quick-change spring chisel retainer for easy changes. Specs: 4,500 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose. Includes air hammer and punch, ripping, cold, and panel cutter chisels with round 0.401" shanks.
3" air cut-off tool with cut-off disc and hex wrench air tool. 4 CFM's at 90 psi. Minimum hose diameter is 3/8". Includes: 1 piece tapered brass inflator; 1 piece inflation needle; 2 piece 1/4'' female brass plugs; 4 piece 1/4'' male brass plugs; 1 piece dual tire chuck; 1 piece pencil tire gauge; 1 piece brass blow gun; 1 piece brass safety nozzle. 2 piece male brass hose connectors; 1 piece 1/4" quick brass coupler. 1 piece air blow gun; 1 piece female brass hose connector. Built-in power regulator. Cuts through 1" diameter steel rods, fiberglass, copper or aluminum tubing and angle iron up to 1/2". Accepts 3" diameter x 1/16" thick cutting wheels. Specs:  20,000 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
Kit includes: 1 pc brass tire chuck. 1 pc female brass connector. 1 pc male brass connector. 1 pc 1/4'' x 25' air hose. 1 pc tapered brass inflator. 1 pc air blow gun. 1 pc inflation needle adapter. 1 pc inflation needle. 2 pc 1/4'' quick brass couplers. 2 pc 1/4'' male brass plugs. 2 pc 1/4'' female brass plugs and 1 pc brass nozzle. Built-in power regulator. Equipped with 3-1/2", 4", and 5" sanding discs. Specs: 18,000 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose. 6" short barrel air hammer with set of chisels. 5 cfm's at 90 psi. Minimum hose diameter is 3/8". 4500 BPM.
Standard 1/4" collet grinder accepts a wide range of accessories. Includes 1/4" air die grinder, 5 mounted grinding stones with 1/4" collet and 5 with 1/8", adapting 1/8" collet for accepting 1/8" accessories also, 2 hand wrenches, 1 nipple, and a blow-molded case. Specs: 22,000 RPM free speed, 4.0 CFM air consumption. 1/4" NPT air inlet requires 3/8" hose. Built-in power regulator. Rear exhaust directs dust, debris, and noise away from operator. Convenient lever throttle for precise speed control. Specs:  22,000 RPM, 4.5 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" air hose. Reversible to assist when binding occurs and for retracting screws. Specs: 1,800 RPM free speed, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
For light-duty engine and exhaust work, installing and removing nuts. Specs: 45 ft-lbs max torque, 160 RPM free speed, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet. 6 cfm's at 90 psi. Minimum hose diameter is 3/8" Keyed chuck. Speedway Pro caulking gun has a bore by tube length of 2" x 8-1/2". Air consumption necessary is 6 CFM. The 1/4" air inlet runs a maximum air pressure of 90 psi.
Built-in power regulator to control speed. Accepts 6" diameter sanding pads. Specs: 10,000 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose. 45 ft-lbs torque range. 4 cfm's at 90 psi. Minimum hose diameter is 3/8". 2 in 1 die grinder/cut-off tool kit with storage case. Uses 1/4" and 1/8" collets. 5 cfm's at 90 psi. Minimum hose diameter is 3/8".
Built-in power regulator to control speed and torque. Specs: 230 ft-lbs max torque, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose. Change your air hammer into a needle scaler with a twist of the arm. It gives you the versatility you need to fly through real work. Compact size to get into tight spaces. Specs: 11,000 RPM, 5.5 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
1/2" air impact wrench, 230 ft-lbs. 4 cfm's at 90 psi. Minimum hose diameter is 3/8". Butterfly design allows 1-hand directional changes. Specs: 12,100 RPM, 4.5 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose. Variable speed trigger for precise speed control. Reversible air drill. Air tool average cfm is 5 at 90 psi. Minimum hose diameter is 3/8". Jacobs chuck.
Variable speed. Uses 6" sanding pad. Minimum hose diameter is 3/8". 5 cfm's at 90 psi. Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting  metals, chipping and scraping surfaces. Specs:  Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes  chisel shank size .401. Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size:  3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle.
Variable speed sander with built-in power regulator, handle control, and 6" pad. Used for body shop and metal or wood preparation. Specs: CFM 4, CFM at Load 17, speed (RPM) 10,000, air inlet size (NPT) 1/4", and min. hose size 3/8". Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and  (1) 20 1/4 oz plastic paint cup. Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral safety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. Rear exhaust directs air away from the operator.  Built in lubricating wick increases angle gear life. Composite housing protects tool from cold air and offers greater operator comfort. Durable ball bearing construction improves balance, reduces vibration and ensures longer life.
Can be used in various applications including porting, weld breaking, deburring, polishing and grinding. Self-locking lever throttle. Grease fitting for increased angle gear life. Ergonomic grip. 20,000 rpm. Rear exhaust. 1/4" collet output. 1.8 m/s2 vibration. 3 CFM average air consumption. 18 CFM air consumption at load. 1/4" air inlet size. Variable speed throttle. Heat treated head for durability. Comfortable ergonomic grip. Ideal for general engine repair, home projects and light industrial applications. Specs:3/8" chuck size, 170 RPM, 55 ft. lbs. max torque, 4 CFM at PSI, 90 max pressure, 3/8" max bolt capacity, 1/4" inlet NPT. For small jobs and hard to reach places. Ideal for light sanding, feather edging and rust removal. 18,000 rpm, 0.45 hp (0.35 kw) motor. Easy to handle, compact and lightweight. Built-in power regulator.
Features variable speed reverse, with 55 ft-lb of maximum torque and 170 rpm free speed, a TwinPawl Plus head design, reinforced heat-treated ratchet head, and ergonomic grip. Specs: average air consumption (CFM) is 3, CFM at load 20, PSI is 90, noise level is 94.8 db, inlet size is 1/4", min. hose size is 3/8", length is 10.4" and weighs 2.6 lbs. The Edge 2.0 nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Ergonomic grip. Angle head for easy cutting. Low profile throttle lever. 1/4" radius with ideal accuracy gives you the control and cutting power you need without the distorted edges. Pro composite air impact wrench, 420 ft-lbs. Air tool average cfm is 7 at 90 psi. Minimum hose diameter is 3/8". Twin hammer mechanism. 5/8 max bolt capacity.
The Edge 2.0 air drill features a powerful and quiet design with speeds from 500 rpm and 0.5 HP. Keyless 1/2" chuck for extended life and easy bit change out. Side ergonomic grip handle and ergonomic grip make this tool more comfortable and precise when getting work done. Contoured grip and trigger. Keyless chuck for quick bit replacement. Handle exhaust directs air away from work area. Specs: 5 HP, 3/8" chuck, 1700 rpm, 4 CFM, 29 CFM at air consumption at load, 1/4" inlet, 3/8" minimum hose size. 7.4" overall length. 2.7 lbs. tool weight. Features variable speed reverse lever-style throttle, with 160 RPM, 54 ft-lb (73 Nm) of maximum torque, and a 360 degree adjustable exhaust that directs air away from the operator and the work. Specs: average air consumption (CFM) is 4, CFM at load 19, inlet size is 1/4", and min. hose size is 5/16".
Variable Speed. Produces swirl-free finish. Lightweight, low vibration composite design. Contoured grip. Specs: Air Consumption (CFM):16; CFM at Load: 15.5; Speed (RPM): 10,000; Air Inlet Size (NPT): 1/4" ; Min. Hose Size: 5/16". Includes: 360 degree swivel vacuum adapter that provides greater range of movement without tangled hoses and cords. Variable reversible speed with aluminum housing, a working torque of 25-200 (ft.-lb.) and a max. torque of 450 (ft.-lbs.), ergonomic grip and handle exhaust. Specs: drive is 1/2" (square), no load speed is 8,000 RPM, average air consumption (CFM) is 4.3, CFM at Load 24, inlet size is 1/4", min. hose size is 3/8", noise level is 90.3 db, weighs (lbs.) 5.3 lbs and is 7 1/8" long. Tools have a polished aluminum body with powder coated components  and are GS/CE certified. Includes: 1/2" air impact wrench, 3/8" air ratchet wrench, air hammer, 14" air die grinder, (10) ten 1/2" drive impact sockets, 1/2-3/8" socket adapter, 3" extension bar, (10) ten bits for various screw types, ratchet bit adapter, (4) four chisels, chisel spring retainer, (5) five 1/4 shank grinding stones, (5) five 1/8" shank grinding stones, 1" sanding drum, 3/4" sanding drum, (3) three 1" sanding drum sleeves, (3) three 3/4" sanding drum sleeves, 1/4" collet, 1/8" collet, (2) two die grinder wrenches, 4mm hex key, blow gun, safety tip blow gun nozzle, high pressure safety nozzle, dual head tire chuck, 120 PSI tire gauge, 1/4 NPT quick coupler, 1/4" NPT male/male connector, 1/4" NPT female/female connector, five 1/4" NPT male connectors, male hose end fitting, two 3/8" ID hose clamps, thread sealant tape, and an oil bottle.
Twin Hammer impact mechanism and forward/reverse power regulator. Comfortable vibration-absorbing grip. Specs: 6-vane motor, 1/2", 8,000 RPM, 500 ft/lbs.max torque, 5 CFM at 90 PSI. Variable speed lever style throttle. Advanced head design for extra durability. Up to 54 ft-lbs. torque. Specs: 160 RPM free speed, 3/8" bolt cap, 4 CFM, 19 CFM at load, 94.4/105.4 dBA, 1/4" air inlet. Powerful, 550 ft-lbs of max reverse torque. 6-vane motor with forward power regulator, composite housing, handle exhuast, 360 degree swivel inlet, and twin hammer impact mechanism. Specs: no load speed is 9,500 RPM, average air consumption (CFM) is 5, CFM at load 25, 1,200 IPM, inlet size is 1/4", min. hose size is 3/8", noise level is 96.6 db and weighs 4.3 lbs.
Continuously refined. Offers the sheer power  and performance features to tackle the toughest jobs with ease. Durable and economical. Adjustable power regulator. Pressure feed lubrication. Easy to service two piece construction. 425 ft./lbs of torque and provides 8,000 rpm (1,2000bpm) to deliver fast, efficient performance. Contoured handle for comfort and control. 690 ft.-lbs. of reverse torque means you'll have the power to burst through those stubborn bolts. Comfortable and easy to use. One hand forward/reverse switch. Lightweight at only 4.2 lbs. Made in the U.S.A. Powerful 3/8" pistol grip drive impact wrench. 180 ft-lb maximum torque. Consistent torque, even with air pressure changes. More torqe with less vibration. Lightweight and compact. Built-in power regulator helps control torque. Jumbo hammer impact mechanism. Pressure feed lubrication system.
Variable speed trigger, twin hammer impact mechanism, ergonomic grip, powerful 6-vane motor and easy to use forward/reverse power regulator. Includes: 1/2" impact tool 231G, 3/8" ratchet 170G, a socket set, and a blow-molded carrying case. Allows greater access to tight spaces, while the minimal weight (2-1/2 lbs) reduce operator fatigue. Hard coat anodized end plate stands up to tough jobs. 4 position power regulator dial for max control. Improved grease fitting for easy maintenance. One hand forward/reverse for easy operation with 300 ft-lbs max power. 7-vane motor for more power. Ergonomic housing offers greater operator comfort. Feather touch trigger enables impressive control. Optimized air flow ensures maximum performance. Quiet tool technology reduces sound levels without compromising power performance. Lightweight design with composite grip for improved comfort. Locking lever with tease throttle and rear exhaust. Side handle can be used on left or right. Specs: 0.88 HP, 4-1/2", 12,000 RPM, 5/8" -11 thread, 4-1/2" disc capacity, 10 CFM, 41 CFM at load, 3/8" min hose, 1/4" inlet.
As close as you can get to the real racing tools. Delivers power, speed, and durability for shop tasks. Specs: 625 ft.-lbs. of torque in reverse, with 10,000 rpm. Lightweight and easy to operate with handle exhaust and oil bath lubrication. Full power in reverse. 3-position adjustable power in forward. Integral 360-degree swivel inlet. Specs: 1,100 ft.-lbs. of max torque. 200-900 ft.-lbs. working torque, 1,200 BPM, 5,500 RPM, 9.5 CFM, 38 CFM at load, 98.1/109.1dBA. 12.4 lbs. tool weight. 9" tool length. Delivers incredible performance and industrial grade durability in an impact wrench. Efficient air consumption to save you money. 1,350 ft-lb max reverse torque is compact to access tight spaces. Built to last and designed to withstand tough use in rugged environments. Easy to clean inlet screen means less downtime and better tool performance.
   
 
1 2