Home > HARDWARE > WINDOW & DOOR HARDWARE > GARAGE DOOR HARDWARE > GARAGE DOOR HARDWARE
Sort By:
1 2
Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12149 Extruded Cable Ferrule and Stop Prime Line GD 12152 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime Line GD 12151 Extruded Cable Ferrule and Stop Prime Line GD 12153 Extruded Cable Ferrule and Stop BOLT/NUT FLT-HD CARRIAGE 12PK
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. National Hardware Carriage Bolt and Nut, Series: V7652, 1/4-20 in Thread, Flat Head, 1-3/4 in Thread Length, Steel, Zinc Plated, Used With Wood or Steel Garage Doors
BOLT/NT RBD NK ZN 1/4IN-20X1/2 Prime Line GD 12154 Extruded Cable Ferrule and Stop Prime Line GD 52109 Garage Door Pulley
National Hardware Bolt and Nut, Series: V7653, 1/4-20 in Thread, 1/2 in Thread Length, Ribbed Neck, Steel, Zinc Plated, Used With Fiberglass Garage Doors Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut.
Prime Line GD52111 Convex Edge Door Roller Prime Line GD 52130 Door Lift Handle Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf
Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D. Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts.
National Hardware V7638 Lift Handle PULLEY GARAGE DOOR GALV 3IN   ROLLER LG STM HD PLN STL 1-7/8
National Hardware Lift Handle, Series: V7638, 7-1/4 in Length, Steel, Galvanized, BHMA A138.18 National Hardware Door Pulley, Series: N280, 0.56 in Bore, 3 in Outer Diameter, 3 in Sheave Width, 1 Grooves, 0.39 in Groove, Hook Mounting, Steel, Galvanized, Includes: Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On One Car Stretch Spring Door National Hardware Door Roller, Series: V7602, Heavy Duty, Long Stem, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 10 Ball Bearing, 7-9/16 in Overall Length, Plain Steel, 7/16 in Shaft
ROLLER STND PLN STL 1-3/4IN   HINGE HI-GALV 7-3/8IN         Prime Line GD52110 Convex Edge Standard Door Roller
National Hardware Door Roller, Series: V7603, Standard, 1-3/4 in Roller Diameter, 0.31 in Roller Width, 4 in Overall Length, Plain Steel, 7/16 in Shaft National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 2, For Metal and Wood Garage Doors Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf BRACKET RLR BTM/TP GLV 2-1/2IN ROLLER STND PLN STL 1-7/8IN
Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. National Roller Bracket, Adjustable, Top Mount, 7/16 in Roller Shaft, Steel, Hot Dip Galvanized, Includes: Bolt and Nut, Class CD1832, Used On Overhead Sectional Wood and Steel Garage Doors National Hardware Door Roller, Series: V7601, Standard, 1-7/8 in Roller Diameter, 0.44 in Roller Width, 4.38 in Overall Length, Plain Steel, 7/16 in Shaft
HINGE HI-GALV 7-3/8IN         Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf ROLLER GARAGE DRSTL 3-1/2X7/16
National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 1, For Metal and Wood Garage Doors Used by most garage door manufacturers. Roller tube accepts a standard 7/16"OD stem roller. Made of 14 gauge galvanized steel, 3"W overall. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. High-impact plastic for good performance and quiet, trouble-free operation in all weather environments. Roller 1-7/8" O.D.
Prime Line GD52117 Adjustable Top Mount Roller Fixture HINGE HI-GALV 7-3/8IN         HINGE HI-GALV 7-3/8IN
Used on both wood and metal doors. Heavy-duty galvanized steel construction. Adjustable roller plate. Accepts a standard 7/16"OD stem roller. Includes four 1/4"-20 x 1-7/8" pancake head carriage bolts with nuts. National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 3, For Metal and Wood Garage Doors National Hardware Door Hinge, High, 7-3/8 in Overall Length, 14 ga Steel, Galvanized, BHMA A138.1, NO 4, For Metal and Wood Garage Doors
LOCK FOR SHFT ZN PLT 5/16IN SQ ROLLER HD PLN STL 1-7/8IN     Prime Line GD52113 Convex Edge Door Roller
National Hardware Swivel Lock, Series: V7645, Suitable For Use With: 5/16 x 5/16 in Shaft, Steel, Zinc Plated, For Garage Door National Hardware Door Roller, Series: V7602, Heavy Duty, Suitable For Use With: Residential Garage Doors, 1-7/8 in Roller Diameter, 10 Ball Bearing, 4-3/8 in Overall Length, Plain Steel, 7/16 in Shaft Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Prime Line GD52212 Convex Edge Door Roller TORSION-LIFT GLV 8FT8X3/32IN  PULLEY GARAGE DOOR GALV 3IN
Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D. Visual-pack. National Hardware Door Pulley, Series: N280, 3 in Sheave Width, Steel, Galvanized, Includes: Fork, Axle Bolt and Nut, Standards: BHMA A138.18, For Residential Extension Spring Doors
Prime Line GD 52101 Aircraft Cable Prime Line GD 52183 Aircraft Cable CYLINER D-BLT RIM KYD
Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. Galvanized carbon steel aircraft cable used on 7'H torsion spring doors. National Hardware Door Dead Bolt, Series: V7650, Rim Cylinder Pin, 3-1/8 in Overall Length, Steel, Aluminum, 2 in Length Shaft
Prime Line GD52114 Convex Edge Door Roller LOCKS WIDE ZINC PLATED 5-1/2IN Prime Line GD52140 Convex Edge Standard Door Roller
Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D. National Hardware Side Lock, Series: V7646, 5-1/2 in Overall Width, Steel, Zinc Plated Factory lubricated, steel inner race. Fits 2" standard J-track. Roller 1-7/8" O.D.
Prime Line GD 52197 Bottom Mount Lift Bracket TORSION-LIFT GLV 8FTX8INX1/8IN CABLE EXT SPRG SFTY 8FT8X1/8IN
Used on both wood and metal doors. Heavy-duty 13 gauge galvanized steel construction and steel cable pin. Accepts a standard 7/16"OD stem roller. Includes left and right hand brackets. National Hardware Torsion Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood National Hardware Safety Cable, Series: N280, 1/8 in Cable Diameter, 8 ft 8 in Cable Length, Steel Cable, Galvanized Body Finish/Color, Includes: (2) Cables and (20 Quick Links, Standards: BHMA A138.18, For Garage Doors With 1 Extension Spring Per Side and For Single Spring Hookups
PULLEY GARAGE DOOR GALV 4IN   Prime Line GD 52100 Extension Spring/Cable 1/8 in OD x 12 ft L LIFT BTM/RL BRKT 13G 5-11/16IN
National Hardware Door Pulley, Series: N280, 0.56 in Bore, 4-1/4 in Outer Diameter, 4 in Sheave Width, 1 Grooves, 0.71 in Groove, Hook Mounting, Steel, Galvanized, Includes: Spring Clevis Hook, Nut and Bolt, Standards: BHMA A138.18, Used On Double Car Doors Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors. National Hardware Bottom Lift and Roller Bracket, Series: V7626, Suitable For Use With: Wood or Metal Garage Doors, 5-11/16 in Length, 13 ga, Steel, Standards: BHMA A138.18
LOCKS WIDE ZINC PLATED 7-1/2IN CABL SPG EXT LFT GLV 12FTX3/32 Prime Line GD 52108 Garage Door Pulley
National Hardware Side Lock, Series: V7647, 7-1/2 in Overall Width, Steel, Zinc Plated National Hardware Extension Spring Lift Cable, Series: N280, 3/32 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut.
ROD WINDING 2PK               Prime Line GD 52138 Door Slide Lock Prime Line GD 52118 Inside Deadlock
National Hardware Torsion Winding Rod, Series: V7677, Suitable For Use With: Garage Torsion Springs, 1/2 in Dia x 16 in Length, Steel, Plain Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever. Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts.
Prime Line GD 52139 Rim Cylinder Lock ROLLER STND ZINC PLATED       Prime Line GD 52102 Aircraft Safety Cable Set with Cable Clamps
Used to key lock a variety of interior latching mechanisms. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Includes cylinder lock with trim ring, 2 keys, mounting plate, and 2 screws. 1-3/4" Nylon roller, 4-1/2" stem, 7/16" steel shaft. Visual-pack. Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors.
CABLE SPG EXT LFT GLV 12FTX1/8 L-HNDL LOCK UNIV CHM          SHAFT LOCK CHRM 5/16IN SQX4IN
National Hardware Extension Spring Lift Cable, Series: N280, 1/8 in Cable Diameter, 12 ft Cable Length, Steel Cable, Galvanized Body Finish/Color, Standards: BHMA A138.18, For 7 ft Single or Double Wood or Metal Doors National Hardware Locking L-Handle, Series: V7641, Universal, Suitable For Use With: Model 7645 Swivel Lock/7654 Snap Lock, Die-Cast Handle, Steel Shaft, Chrome, 5/16 sq-in x 3-11/16 in Shaft, For Wood or Metal Garage Doors, Camper Tops, RVs National Hardware Garage Door Handle, Series: V7640, 5.81 in Length, 1.33 in Width, Die-Cast Handle, Steel Shaft, Chrome Plated, 5/16 in Dia x 4 in Length Shaft, For Wood or Metal Garage Doors, Camper Tops and RVs
Prime Line GD 52238 Hard Drawn Wire Winding Rod T-HNDL BLANK 5/16 SQX3IN CHRM LOCKS ALUMINUM
280-602 BLANK T-HANDLE
Our Price: $11.48
LOCKS ALUMINUM
Our Price: $11.98
Hard-drawn wire rods, the only tool used to wind and unwind tension on torsion springs. National Hardware Blank T-Handle, Series: V7639, Die-Cast Handle, Steel Shaft, Chrome Plated, Includes: (1) 1/8 in Dia x 5/8 in Length Knurled Pin, (2) 2 Push Retainer For 0.309 sq Shaft, (3) Flat Washer 7/16 in ID and (4) NO 7 x 1 Oval Head Slotted Screws, 5/16 in Dia x 3 in Length Shaft National Hardware Dead Bolt Lock, Series: V7651, 2 Keys, Steel, Aluminum, Includes: (2) Keys, (4) NO 8 x 5/8 Pan Head Phillips Wood Screws, For Wood or Metal Garage Doors
   
 
1 2