Home > HARDWARE > CONSTRUCTION HARDWARE > BUILDING HARDWARE > ROOFING
Sort By:
1
Eave guard Start-R-Roll AA936 Shingle Starter Strip Eave guard HE740915 Shingle Underlayment LL Buildsite NMM50 Moss/Mildew Remover
Provides a protective waterproof base beneath the first course of shingles. Zip strip seals down shingle tabs to protect from wind up-lift. Also use for roof flashing and gutter repairs. 50 mil (1.3 mm) thickness. Waterproofing underlayment. Composed of a high tack rubberized asphalt, coated on a non-woven glass fiber mat. Lower surface has a split-release silicone release backing for ease of application. Specifically designed to provide secondary waterproofing protection to shingles as well as prevent ice damage and wind driven rain. Meets ASTM D1970-08 standard and is ICC listed. Self-sealing when penetrated by mechanical fasteners or roofing nails. Fully adhered system prevents lateral moisture migration. Sand surfaced for slip-resistance. UL Classified. Class A fire classification under fiber-glass shingles and Class C under organic felt shingles (per ASTM E108/UL 790). 1.3 mm thickness. EPA approved; installs easily near the roof ridge; for composition shingle, shake or tile roofs (bend strips to conform to the shape of the tile); for long-lasting protection.
Eave guard HE740916 Shingle Underlayment FELT SYN EXO25 7ML 48INX250FT FELT SYN EXO35 7ML 48INX250FT
Waterproofing underlayment. Composed of a high tack rubberized asphalt, coated on a non-woven glass fiber mat. Lower surface has a split-release silicone release backing for ease of application. Specifically designed to provide secondary waterproofing protection to shingles as well as prevent ice damage and wind driven rain. Meets ASTM D1970-08 standard and is ICC listed. Self-sealing when penetrated by mechanical fasteners or roofing nails. Fully adhered system prevents lateral moisture migration. Sand surfaced for slip-resistance. UL Classified. Class A fire classification under fiber-glass shingles and Class C under organic felt shingles (per ASTM E108/UL 790). 1.3 mm thickness. 7 Mil thickness; meets ICC-ES-ESR-3905 standard; UV resistant; can be exposed for up to 6 months. Roll size: 10 sq. Made in USA. 7 Mil thickness; meets ICC-ES-ESR-3905 standard; UV resistant; can be exposed for up to 6 months. Roll size: 10 sq. Made in USA.
Interwrap Corp Titanium Roof Underlayment Roll Storm Guard 0915000MV Roofing Leak Barrier Peel & Seal 50036 Roofing Membrane
A replacement for #15 or #30 oil saturated felt; designed for steep slope roofing under asphalt shingles, synthetic shingles, residential metal roofing and cedar shakes; 12 times stronger than #30 felt; meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV; 8 square more per roll compared to #30 felt; easier to install - wider, lighter and more coverage per lap; synthetic construction is impervious to mold; lays flat and does not absorb water and wrinkle; enhanced UV protection; no oil leaching, no hazardous material content; fiber grip slip-resistant walking surface; advanced backside non-slip coating; low temperature flexibility. Roll size: 10 sq. or 93m?. Smooth, film surface link barrier with special adhesive for one-time repositioning, but aggressively adheres over time. Unique film surface pattern improves footing even in hot weather. Self seals around nails or metal roofing fasteners. Split back release film peels off in layers for faster installation and greater homeowner value. Fiberglass reinforcement helps resist wrinkling and buckling. Lays flatter under shingles. Design to withstand high metal roof temperatures and will not melt or flow. High temperature compound is suitable for most metal roof applications. For application under copper and zinc. Passes low temperature flexibility (-20 degrees) and waterproof integrity after low temperature flexibility requirements. Can be exposed for up to 60 days if necessary. A single-ply, one-step, low-slope roofing membrane that can be left exposed to the elements. Silt sizes are ideal for roofing, patching, gutter repair, flashing and any hard-to-waterproof area. Composed of a laminate of reflective aluminum foil, rugged, cross-linked polymer films and a thick layer of rubberized asphalt.The asphalt adhesive aggressively adheres to most surfaces and self-seals around punctures to form a waterproof barrier. Requires no coatings or covering for exposure to sunlight and is flexible to conform ro odd shapes. Aluminum 4", 6" and 9" come in shrink-wrapped and labeled rolls. Meets ASTM D 1970, ICC-ES AC-75, UL Class A fire rating, Miami Dade County approved and Florida Building code.
Peel & Seal 50012 Roofing Membrane Peel & Seal 50009 Roofing Membrane FELT SYN EXO50 10ML 48INX250FT
A single-ply, one-step, low-slope roofing membrane that can be left exposed to the elements. Silt sizes are ideal for roofing, patching, gutter repair, flashing and any hard-to-waterproof area. Composed of a laminate of reflective aluminum foil, rugged, cross-linked polymer films and a thick layer of rubberized asphalt.The asphalt adhesive aggressively adheres to most surfaces and self-seals around punctures to form a waterproof barrier. Requires no coatings or covering for exposure to sunlight and is flexible to conform ro odd shapes. Aluminum 4", 6" and 9" come in shrink-wrapped and labeled rolls. Meets ASTM D 1970, ICC-ES AC-75, UL Class A fire rating, Miami Dade County approved and Florida Building code. A single-ply, one-step, low-slope roofing membrane that can be left exposed to the elements. Silt sizes are ideal for roofing, patching, gutter repair, flashing and any hard-to-waterproof area. Composed of a laminate of reflective aluminum foil, rugged, cross-linked polymer films and a thick layer of rubberized asphalt.The asphalt adhesive aggressively adheres to most surfaces and self-seals around punctures to form a waterproof barrier. Requires no coatings or covering for exposure to sunlight and is flexible to conform ro odd shapes. Aluminum 4", 6" and 9" come in shrink-wrapped and labeled rolls. Meets ASTM D 1970, ICC-ES AC-75, UL Class A fire rating, Miami Dade County approved and Florida Building code. 7 Mil thickness; meets ICC-ES-ESR-3905 standard; UV resistant; can be exposed for up to 6 months. Roll size: 10 sq. Made in USA.
Peel & Seal 50004 Roofing Membrane Peel & Seal 50006 Roofing Membrane Interwrap Corp Titanium All Purpose Roof Underlayment Roll
A single-ply, one-step, low-slope roofing membrane that can be left exposed to the elements. Silt sizes are ideal for roofing, patching, gutter repair, flashing and any hard-to-waterproof area. Composed of a laminate of reflective aluminum foil, rugged, cross-linked polymer films and a thick layer of rubberized asphalt.The asphalt adhesive aggressively adheres to most surfaces and self-seals around punctures to form a waterproof barrier. Requires no coatings or covering for exposure to sunlight and is flexible to conform ro odd shapes. Aluminum 4", 6" and 9" come in shrink-wrapped and labeled rolls. Meets ASTM D 1970, ICC-ES AC-75, UL Class A fire rating, Miami Dade County approved and Florida Building code. A single-ply, one-step, low-slope roofing membrane that can be left exposed to the elements. Silt sizes are ideal for roofing, patching, gutter repair, flashing and any hard-to-waterproof area. Composed of a laminate of reflective aluminum foil, rugged, cross-linked polymer films and a thick layer of rubberized asphalt.The asphalt adhesive aggressively adheres to most surfaces and self-seals around punctures to form a waterproof barrier. Requires no coatings or covering for exposure to sunlight and is flexible to conform ro odd shapes. Aluminum 4", 6" and 9" come in shrink-wrapped and labeled rolls. Meets ASTM D 1970, ICC-ES AC-75, UL Class A fire rating, Miami Dade County approved and Florida Building code. #30 felt replacement used for steep slope roofing designed for use under all primary roofing types including; Asphalt Shingles, Synthetic Shingles, Metal roofing, and Cedar Shakes.; 11 times lighter and 14 times stronger than #30 felt; Class A Fire ASTM E108, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV; Class 4 hail rating; ICC ES Approved: synthetic construction inert to mold growth; Patented ?Sure-Foot? slip resistant nodular walking surface, contributes to ?LEED? points, certified minimum of 20% reclaimed content (100% recyclable); all temperature performance -40? F to 240? F; 6 month UV exposure; cool light gray surface doesn?t expand or contract; dual logo custom printing available; Roll size: 10 sq. or 93m?.
Interwrap Corp Titanium Roof Underlayment Roll Interwrap Corp Titanium Pro-Grade Roof Underlayment Roll
A premium Ice Damming and Leak protection used for steep slope roofing under all metal, tile, slate, shake and shingle roofing; the only modified rubberized asphalt Peel & Stick underlayment with a patented slip resistant "Sure-Foot" nodular walking surface technology that allows for easier steep slope walkability, even in wet or dusty conditions. PSU30 also features a crinkled silicon treated poly split release liner making removal quicker and easier than single sheet competitors. Features a self sealing lap seal system which forms an impervious asphalt to asphalt bond at overlapping seams, delivering superior waterproofing protection; an approved Polyfoam underlayment for use with ?Polyset? foam systems; Class A Fire ASTM E108; Meets and exceeds ASTM D1970; high temperature (240?F / 115?C) flow resistance; Installation temperature 40?F (5?C) and above; synthetic construction inert to mold growth; cool light gray surface doesn?t expand or contract; up to 6 months UV exposure;  Roll size: Gross 216 sq. ft. or 20m?; Net of overlap 2 sq. #30 felt replacement used for steep slope roofing designed for use under all primary roofing types including; Asphalt Shingles, Synthetic Shingles, Metal roofing, Tiles, Slate, and Cedar Shakes.; 6 times lighter and 20 times stronger than #30 felt; Class A Fire ASTM E108, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV; Class 4 hail rating; ICC ES Approved: synthetic construction inert to mold growth; Patented ?Sure-Foot?? slip resistant nodular walking surface, contributes to ?LEED? points, certified minimum of 20% reclaimed content (100% recyclable); all temperature performance -40? F to 240? F ; 6 month UV exposure; cool light gray surface doesn?t expand or contract; dual logo custom printing available; Roll size: 10 sq. or 93m?.
   
 
1