Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > THREADLOCKING COMPOUNDS
Sort By:
1
ITW Permatex 24206 Threadlockers GLUE SCREW LOCKING 6MIL       Perma-Lock 27106 Thread Locking Compound
GLUE SCREW LOCKING 6MIL
Our Price: $3.89
Use for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs. For all 1/4" to 3/4" diameter nut and bolt assemblies. Locks and seals while preventing parts loosening due to vibration. Resists virtually all leakage, shock and vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Resists light oils and chemicals and dripping from threads during assembly. -65 to 300 degrees Fahrenheit temperature resistance range. Designed to lock screws, nuts, and bolts in place. This product is a single component, anaerobic liquid that cures when confined in the absence of air between close fitting metal surfaces, ideal for all 6mm to 25mm (1/4 inch to 1 inch) diameter threaded assemblies. Excels at sealing metal-to-metal threads for both interior and exterior applications, due to chemical and temperature resistance. The cured assembly is easily adjustable or removable with hand tools. Forms lasting bond that resists heat, vibration, and chemicals. Seals metal threads to prevent rust and leaks. Increases holding power of screws, nuts, and bolts. Cures without cracking or shrinking. Adjusts or disassembles with hand tools. Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved.
Perma-Lock 24206 Thread Locking Compound ADHESIVE MULTI-MATERIAL 5G    Loctite 209741 Threadlocker
Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved. Designed to lock screws, nuts, and bolts in place. This product is a single component, moisture-curing liquid that forms an ideal bond for all 6mm to 25mm (1/4 inch to 1 inch) diameter threaded assemblies. Bonds dissimilar materials such as metal, wood, and most plastics. Forms lasting bond that resists heat, vibration, and chemicals. Seals threads to resist rust and leaks. Increases holding power of screws, nuts, and bolts. Cures without cracking or shrinking. Designed for the permanent locking and sealing of threaded fasteners. Cures when confined in the absence of air between close fitting metal surfaces. Protects threads from rust and corrosion and prevents loosening from shock and vibration. Removable once cured by heating up parts to 500-degrees Fahrenheit. Use on metal fasteners up to 1" dia.
ITW Permatex 24005 Thread Locking Compound ITW Permatex 27005 Thread Locking Compound ITW Permatex 24010 Gel Twist Thread Locking Compound
All purpose medium strength thread locker, will not run or drip. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch. Protects threads from corrosion, removable with hand tools for easy disassembly. High strength thread locker for heavy-duty applications, will not run or drip. Well-suited for permanently locking studs and press fits. 3,000 psi holding on slip and press fit assemblies. May require heat or special tools for removal. Gel formula provides "liquid-reliability" without drips, globs, mess or waste. For all nut and bolt applications 1/4 inch to 3/4 inch. Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, Grade N.
Perma-Lock 24213 Medium Strength Thread Locking Compound Perma-Lock 27113 Thread Locking Compound ITW Permatex 24240 Thread Locking Compound
Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved. Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved. All purpose medium strength thread locker. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch. Protects threads from corrosion. Removable with hand tools for easy disassembly.
ITW Permatex 27140 Thread Locking Compound
High strength thread locker for heavy-duty applications 3/8 inch to 1 inch. Well-suited for permanently locking studs and press fits. Adds 3,000 psi holding power on slip and press fit assemblies. May require heat or special tools for removal.
   
 
1