Home > ELECTRICAL > SPECIALTY ELECTRICAL > TOOLS & TESTERS
Choose a sub category:
FISH TAPES CONDUIT BENDERS WIRE STRIPPERS & CRIMPING TOOL
CIRCUIT/VOLTAGE TESTERS FUSE PULLERS LIGHT BULB CHANGERS
ALLIGATOR CLIPS GREENLEE SPECIALTY TOOLS/ACCES MISC TOOLS & ACCESSORIES
Sort By:
1 2 3
GB-Gardner Bender 14-075 Alligator Clips GB-Gardner Bender 14-077 Alligator Clips GB-Gardner Bender 14-078 Alligator Clips
For home, auto and marine applications. For home and auto applications. For home, auto and marine applications.
GB-Gardner Bender 14-076 Alligator Clips Gardner Bender 14-630 Battery Clamp Gardner Bender GET-3100 Voltage Tester
For home, auto and marine applications. For battery, battery charger and testing equipment applications. Copper clad clamps. Handle grips are insulated and color-coded for positive (red) and negative (black) identification. Test for presence of voltage in live circuits. Tests AC/DC voltage from 80-250 volts. The neon indicator glows when voltage is present and brightens as voltage increases. Insulated housing and 2 inch test leads. Built in pocket clip. Tests DC motors, switches and outlets. With detailed user instructions.
Gardner Bender RTL-108 Replacement Medium Test Lead Cooper BP914 Circuit Tester Gardner Bender GET-3202 Low Voltage Voltage Tester
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS Plastic. Flexible cords for easy use. For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors. Tests AC/DC voltage from 5-50 volt. Glows when voltage is present and brightens as voltage increases. Insulated alligator clip tests leads. UL Listed. Carded.
Toolbasix JL-SST-401183L Cable Crimper Wire-Aide 79-006N Non-Toxic Wire Pulling Lubricant Milwaukee Clipper GS-40 Adjustable Wire Cutter/Stripper
Cuts and strip wires, crimps ignition terminals. Easy-to-read wire size markings. Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim; cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL Listed. Includes spring return and lock. Adjustable, hardened spring steel. Strips 10-24 gauge wire.
Gardner Bender GTPS-3100 Cable Stripper Gardner Bender GRT-3500 Outlet Tester GB CR-1000 Cable Ripper
Strips UTP and STP cable up to .24" (6.2mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded. Tests standard receptacles and extension cords to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle or extension cord (110 /125 volt circuits). Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provides indication of circuit status or specifies wiring errors. GB Cable Ripper, Premium, 14 - 6 AWG Cable/Wire, 4 in Overall Length, cULus Listed, For Use to Cut Off Cable Jacket
Gardner Bender GET-213HV High Visibility Dual Indicator Voltage Tester Gardner Bender GET-3213 3-Range Voltage Tester GB-Gardner Bender CT6101 Continuity Testers
Large, dual, neon indicators acknowledge presence of voltage. Individual indicators for each voltage range assures reliability of testing. Probes snap on bottom of housing for single hand testing of outlets. Insulated leads and housing. Tests from 100 to 300 volt AC/DC. UL Listed. Three-way live circuit tester indicates 120, 240 and 277 volt AC. UL Listed. Tests for breaks in non-energized wires or cords. 360 degree visual indication. Durable, heavy-duty tip. Flexible lead with insulated alligator clip. Pocket clip. Operates from 2 AAA batteries (included).
GB-Gardner Bender SK-632T Electrician Screw Kits Gardner Bender ET6204 4-Range High Visibility Voltage Tester GB SK-832T Electrician's Screw Kit
Contains assorted sizes and lengths of commonly used electrical screws. Screws are #6 - 32, ranging from 3/4" to 3" in length. Compact ergonomic design. Hi-impact ABS housing. Visual voltage indication. Snap-in leads are spaced to fit a standard outlet for easy, hands-free testing. Tests for voltage at 120 volt, 240 volt, 277 volt and 480 volt. With pocket clip. cULus Listed. GB Screw Kit, Electrician's, 120 Pieces, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in and  (20) 2 in  Phillips Head Screws, NO 8-32 Phillips Round Head, For Switches, Receptacles and Outlet Applications
Gardner Bender GFI-3501 Manual Outlet Tester Gardner Bender GS-386 Diagonal Cutting Plier Gardner Bender GS-366 Cable Crimper/Stripper
Tests ground fault breakers by overloading circuit and tripping GFCI. Plug tester into any ground fault receptacle (110-125 volt AC) and press black button to overload circuit. Tests for seven conditions; ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provide indication of circuit status or specify which wire is defective. Carded. Tapered nose allows cutting in tight locations. Dual cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire. Strips cable, 10-22 AWG wire, crimps terminals and cuts bolts. Easy-to-read wire size markings.
Gardner Bender GCT-3304 Low Voltage Twin Probe  Continuity Tester Gardner Bender GCV-3206 Low Voltage Twin Probe Continuity Tester Gardner Bender GS-387 Linemans Plier
Economy continuity tester, tests continuity in nonenergized circuits. Features 36" insulated lead with alligator clip end. Fully shielded indicator bulb lights to indicate continuity, Uses 2 AA batteries, not included. Test continuity without wire probes on non-energized circuits. Tests AC/DC voltage from 12 to 250 volts on energized circuits. Glows when voltage or continuity exists. Uses 2 button batteries, included. UL Listed. Carded. Side-cutting pliers. Comfort-grip handles. Cuts copper or aluminum wire. Serrated, square tip jaw for extra grip on bolts.
Smart 3002 Bulb Changer Kit Greenlee DTAP1/4-20 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP6-32 Right Hand Drill/Tap/Countersink Bit
Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling.
Greenlee DTAP10-24 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP8-32 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP10-32 Right Hand Drill/Tap/Countersink Bit
Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling.
Greenlee DTAP12-24 Right Hand Drill/Tap/Countersink Bit Bussmann Fuses BP/FP-2 Fuse Pullers Mintcraft CP-C8153L Multi Function Wire Stripper
Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Heavy-duty tool for safely removing cartridge fuses from their blocks. Rust-resistant steel with cushioned vinyl grip. Easy-to-read wire size markings.
Gardner Bender GS-385 Multi-Function Long Nose Plier Smart 3001 Bulb Changer Kit Gardner Bender GS-45 Adjustable Wire Cutter/Stripper
Multi-function long nose pliers cut, strip and crimp. Use needle nose to form wire or grip small parts. Strips number 14 - number 16 AWG solid or stranded wire. Crimps insulated terminals up to number 10 AWG. Cuts solid or stranded wire. Serrated jaw and cushioned grips. Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA. Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling.
Greenlee 60A-3/4 Stubby Quick Change Auger Bit Gardner Bender GKC-100A  Pvc Cutter Gardner Bender GBT-3502 Battery Tester
Shorter for better access to tight spaces between studs and joists, will drill 2' and 4' joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5" (144mm) weight .3 lb. (118g). 1/4" hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails. Design makes fast, clean cuts. Cuts flexible, water-tight flexible, and PVC conduit 1/2" to 1". Reversible cutting blade, lightweight nylon handles, compact 8" tool fits neatly in pocket or tool pouch. LOW/GOOD indicator. Movable contact arm to fit AA, AAA, C, D, 9 Volt and 1.5 volt button cells.
Gardner Bender TT-10B Electrician 3-In-1 Tapping and Rethreading Tool Greenlee 1941-1 Cutter Blade Greenlee 84012 Conical Anchor Kit
Top grade Rockwell 60 steel. Fits tap sizes 6-32, 8-32 and 10-24. Unclogs screw holes, retaps stripped holes. Replacement blade for Greenlee 0952-01 or 1940 flexible metal conduit cutter. Contains 100 anchors, 100 screws and a 1/4" masonry drill bit. For use in concrete, block, tile and brick. Moisture and chemical resistant, for indoor or outdoor use.
Gardner Bender GK-4 Electrical Tool/Tester Set Gardner Bender GS-389 Cable Cutter/Crimper Gardner Bender GS-89 Cable Cutter/Crimper
Contains the most common wiring tools and a voltage tester. Includes one No.GS-67 multi-function crimper/stripper, one No.CR-100 cable ripper and one GET-102  90-300 volt AC/DC circuit tester. For high-leverage. Cuts up to 3/8" diameter cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips. For high-leverage. Cuts up to 3/8" diameter cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips.
Calterm 66212 Streamline Wire Stripper Gardner Bender GVD-3504 Non Contact Voltage Tester Gardner Bender GS-355 Wire Stripper
Cushion grip wire handles. Strips and cuts. Plier nose for pulling and looping wire. Spring return and safety lock. Tests from 50-600 volt AC. Visual (flashing) and audible (beeping) indicators signal presence of voltage. Built-in "safe test" feature to assure batteries are operating properly. Compact design with pocket clip to fit in shirt pocket. UL Listed. Strips solid or stranded wire 10 - 20 AWG. Precision stripping stations. Laser-etched markings. Pliers nose and curved cutting blade aid in pulling and cutting wire. Spring-loaded action returns handles to open position. Curved high-leverage handles for added comfort. Looping hole forms wire to fit on screw terminal.
Gardner Bender GMT-312 12-Range Analog Multimeter GB-Gardner Bender LNW-KIT Locknut Wrenches Gardner Bender GS-360 Wire Stripper with Lock
Compact, tests AC/DC voltage to 300 volt, DC current to 250mA, resistance to 1 M ohm, decibels from -20 to +56dB. Diode protected. With fuse overload protection circuitry. 250 mA fuse. Includes safety test leads and instruction manual. CAT Rating: II 300 volt. cETLus Approved. Fits the majority of UL locknuts. Etched markings allow for easy identification, clearly marked tighten and loosen ends. Thin design allows easy maneuvering in tight locations. Durable steel construction. Hooked tip latches onto locknut and maximizes turning leverage. Strips solid or stranded wire. Laser-etched markings. Pliers nose and curved cutting blade aid in pulling and cutting wire. Power spring return reduces hand fatigue. Looping hole forms wire to fit on screw terminal.  Wire gauge #10 - #20 AWG.
Gardner Bender PDTL-3110 Non-Impact Punch Down Tool Gardner Bender KF-200 2-In-1 Electricians Knife Klein Tools 11045 Wire Cutter/Stripper
Non-impact punch-down, non-cut 110-style blade used in CAT 3 and CAT 5 terminations. Tempered carbon steel blade and screwdriver. Wire gauge markings on both sides, cuts, strips, and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.
GB-Gardner Bender GK-3 Electrical Tester Kits Gardner Bender SCE-3262 Insulated Screwdriver Set Channellock 958 Wire Cutter/Stripper
Contains the most common circuit testers for convenient electrical troubleshooting. One each No. GCT-204 continuity tester, No. GRT-500 receptacle tester and No.GET-102 90-300 volt AC/DC circuit tester. Ergonomic high leverage grips for maximum torque, molded and insulated shaft rated to 1000 volts for protection when working with electricity. Hardened chrome vanadium steel, with magnetic tips. 2 piece set, SCE-3252 - No. 2 Phillips tip and SCE-3256 - 3/16" slotted tip. Carded. Strips insulation, with no damage to wire. Cuts copper wire cleanly. Scissor type blades are precision ground. Lean plier nose pulls, loops wire ends. Highly visible AWG and mm wire gauge sizes embossed in the metal. Comfort grips.
   
 
1 2 3