Home > ELECTRICAL > SPECIALTY ELECTRICAL > AUDIO & VIDEO SUPPLIES > TV WIRE/CABLE FITTINGS
Sort By:
1
Cooper 1172V Type F Wall Jack Cooper 1172W Type F Wall Jack Zenith VA1002RG6CR Type F Coaxial Connector
For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included. For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included. Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth.
Zenith VA1002RG6FT Type F Coaxial Connector Zenith VA1002RG6TW Type F Coaxial Connector American Tack and Hdwe VM1002RG6BU Zenith Coaxial Bushings
Connects two coaxial cables. .75" height x .5" width x .5" depth. Connects to coax cable without tools. .75" height x .5" width x .5" depth. Allows coax cable to feed through wall an internal or external wall. 1.17" height x 1.17" width x 1.17" depth.
Gardner Bender PEC-31525 Coaxial Cable Clamp Zenith VA1001RG6QP Type F Coaxial Adapter Zenith VA1001RG6RA Type F Coaxial Connector
Secures RG-59, RG-6 coaxial. Combo screw for safer installs. Screw-in depth of 1/2". Allows quick connect and disconnect of coax cable. .87" height x .5" width x .5" depth. For use in hard to reach spaces. Repositions cable jack for easy access. Plug and play. .87" height x .67" width x .37" depth.
Zenith VS1001SP2W 2-Way Coaxial Splitter Zenith VW1001WJ2W Dual Type F Wall Jack Zenith VW1001WJ1A Type F Wall Jack
Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into two. 1.25" height x 2" width x 0.5" depth. Connects two 75 ohm coax cables through a wall. 4.5" height x 2.75" width x 0.75" depth. Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth.
American Tack and Hdwe VR1001SW2W Zenith A/B Switches Zenith VW1001WJ1W Type F Wall Jack Zenith VA1010RG6TW Type F Coaxial Connector
Manually switch between two coax input sources to one TV such as antenna or cable. 2.37" height x 2.87" width x 0.75" depth. Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth. Connects to coax cable without tools. .75" height x .5" width x .5" depth.
Gardner Bender F GDC-6CM Compression Connector Zenith VS1001SP3W 3-Way Coaxial Splitter Zenith VS1001SP4W 4-Way Coaxial Splitter
For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use. Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into three. 1.75" height x 2.75" width x 0.5" depth. Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into four. 1.75" height x 2.75" width x 0.5" depth.
Zenith VA1010RG6CR Type F Coaxial Connector Zenith VS3001SP2W 2-Way Coaxial Splitter Gardner Bender F GDC-FAM Coaxial Connector
Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth. Splits one coax cable signal into two. 24K gold connectors. 5-2400MHz. 2" height x 2" width x 0.75" depth. Combine two RG-6 lengths of coaxial cable or connect cables through a wall.
Gardner Bender GDC-3W2G 3-Way Satellite/Digital TV Splitter Gardner Bender F ITC-RG-6 Tool-Less Connector Zenith VS3001SP4W 4-Way Coaxial Splitter
PCB printed circuit board design, nickel plated housing. 5 MHz - 1 GHz bandwidth, 75 Ohm impedance, low insertion loss, over 120 dB of RFI shielding. Splits one signal into three. Strip the cable, fold braid back and push into ITC connector. Splits one coax cable signal into four. 24K gold connectors. Quad Shield video accessory. Four layers of premium shielding to prevent signal interference. 5-2400MHz. 2" height x 3" width x 0.75" depth.
Zenith VA3001HDEX Foldable HDMI Cable Extender American Tack and Hdwe VA3001HDFA HDMI Cable Adapter/Connectors CONN COAX CRIMP WTHRPROOF RG6
Combines two HDMI cables to extend new or existing hookup. Adjusts up to a 90 degree angle to connect in hard to reach places. 2.25" height x .87" width x .5" depth. Adjusts up to a 90 degree angle to connect a HDMI cable to a wall mounted HDTV or other device  in tight, hard to reach places. Meets current HDMI specifications and can support HDTV resolution. 2.25" height x .87" width x .5" depth. Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth.
American Tack and Hdwe VR3001SWHD Zenith HDMI Selector Switches Gardner Bender F ITC-RG-6C Tool-Less Connector WALLPLATE PASS-THRU V BRUSH
Allows manual switching between 3 different HDMI input sources. No signal loss, 1080p transmission. Allows HDTVs with only one HDMI input to receive 3 input sources. 24K gold connectors. Strip the cable, fold braid back and push into ITC connector. Connects cables through a wall. The flush mount design ensures an organized and professional look. Screws are included for mounting.
WALLPLATE HDMI/COAX           WALLPLATE DUAL JACK/HDMI WHITE GB-Gardner Bender DTK-1000 Coax Installation Kits
WALLPLATE HDMI/COAX
Our Price: $32.40
Connects cables through a wall. The flush mount design ensures an organized and professional look. Screws are included for mounting. Connects cables through a wall. The flush mount design ensures an organized and professional look. Screws are included for mounting. Includes cutter, stripper, compression tool, and includes compression "F" connectors GC-330, COM-310, SE-398  and GDC-6C in a custom molded pouch with a belt clip.
Leviton M02-40830-00W Speaker Jack Gardner Bender F GDC-6C Compression Connector
For home audio/video systems including VCR, cable TV, satellite systems and connection of other TVs. Use shielded audio/video cable in a single or dual gang wallplate. Connector modules snap into QuickPort wallplates. Connections are simple without messy soldering. Gold plated for improved performance. UL listed. For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use.
   
 
1