Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 ... 6
GASKET SHOWERHEAD 3 PACK      Oatey 43561 Snap-In Floor Drain GASKET TUB DRAIN CARTRIDGE
Rubber construction. 3/8? inner diameter, 3/4? outer diameter. Prevents leaks between shower arm and shower head. Includes three washers. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4".
COVER DRAIN CLIP SHOWER3-3/8IN Oatey 42042 Tile Rings Oatey 43565 Snap-In Floor Drain
Designed to fit 3-3/8" shower drains. 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
STRAINER TUB SNAP 2IN CHROME  Danco 80001 Tub Spout Ring Oatey 43569 Snap-In Floor Drain
Steel construction, 2" diameter. Grid-style. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
Screw-Tite 42358 Replacement Strainer Plumb Pak PP826-64 Strainer Dome Cover Danco 80002 Tub Spout Ring
For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged. Strainer dome cover with screw. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
STRAINER SHOWER 3-3/8IN CHROME PLATE OVERFLOW 1-HOLE CHROME  Plumb Pak PP22612 Face Plate Screw
Steel construction, use with 3-1/8" drains. Screws not included. Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included. Chrome plated face plate screws.
Plumb Pak Water Saver Economy Showerhead STRAINER TUB 2-15/16 BRSH NIC SHOWERHEAD ADJ ABS CHM 1-3/4IN
Installs to standard 1/2" shower arms. 2.0 gpm flow rate. 2-15/16" diameter. Brushed nickel finish. Replaces Gerber no. 91-292. 1-3/4" adjustable wall-mount showerhead. Chrome finish. ABS construction. Variable spray: fine and soft. Easy lever control for spray adjustment. Meets WaterSense certificate.
DRAIN SHOWER STALL 2 FIP      Plumb Pak Water Saver Economy Showerhead FLANGE ARM SHOWER W/SCREW
Female threaded outlet, stainless steel grid, 3-1/2" flange diameter. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate. Sized to slip over shower arm and has an adjustable set screw for a secure fit. Polished chrome finish.
Mintcraft B1140WH Shower Arms FLANGE SHOWER ARM CHROME      SHOWERHEAD M-HOME/RV CHROME
Standard 1/2", Plastic. Overall length 7". Metal construction. Fits 1/2" IPS connection. Set screw style. Constructed of durable plastic. 1/2" IPS connection. 2.5 GPM.
DIVERTER TUB SPOUT REPAIR KIT VALVE SHOWER CONTROL CHROME   Plumb Pak PP825-50 Shower Drain Grid
Includes lift knob, repairs diverters in most tub spouts. Complete kit. Brass construction, fits standard 1/2? IPS connection, small trickle of water reminds user to shut water off at shower handle when done. For use between shower arm and head. 3-5/16" O.D. 6.88" h x 4-3/4" w.
BASKET SHOWER HAIR CATCHER    Oatey 42787 Shower Drain World Wide Sourcing 24500 Bathtub Spouts
Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe.
B & K 133-106 Shower Drain SHOWER ARM W/FLANGE 6 BRSH NIC Plumb Pak PP825-7 Shower Arm Diverter
For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Stainless steel construction. 6" shower arm fit 1/2" pipe thread. Shower arm diverter, plated plastic, connects personal shower and shower head. 1/2" F.I.P. x 1/2" M.I.P. x 1/2" M.I.P
World Wide Sourcing PMB-020 Shower Adapters World Wide Sourcing 24354 Bath Drain Trip Levers HOSE SHOWER REPLMNT WHITE 60IN
Shower flow adjuster. 1/2" IPS. Zinc body. Screws included.
DRAIN STOPPER RAPIDFIT CHROME Plumb Pak PP606-23 Clevis Plunger Linkage Assembly Mintcraft B1140CP Shower Arms
Plastic. Touch-toe design, For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. Standard 1/2", Plastic. Overall length 7".
SHOWERHEAD FX/MT ADJ SPRAY CHM Plumb Pak PP863-50 Replacement Tip Toe Cartridge Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate
ABS construction, adjustable spray, metal ball joint. Pipe tape included. Threaded shaft. Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated
Plumb Pak PP825-8 Shower Adapter Control TUB SPOUT FRONT CONNECT CHROME BRACKET SHOWER RPLCMT H/H WHT
Plated plastic. Flow control and shut off. Universal design that is compatible with most faucet brands. It features a metal construction that provides strength and durability. Fits 1/2? or 3/4? IPS connections. No diverter. Attaches to standard 1/2" IPS connection (standard shower arm) and allows hand held shower to be used as either wall mount or hand held.
Oatey Snap-Tite Round Drain Strainer Oatey 42097 101 PS Shower Drain Oatey 42086 101 PS Shower Drain
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Oatey 101 PNC Shower Drain Whedon TV1C Shower Flow Controller Danco 80991 Round Bath Drain Overflow Plate With Lever
Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. Installs easily between standard shower arm and head.  Push button control easily adjusts spray force from full to a trickle, great for saving while lathering, shampooing, etc. Made in USA Includes screws. 2" center to center holes. Carded.
Plumb Pak PP826-11 2-Hole Trip Lever Style Tub Face Plate Plumb Pak PP825-51 Shower Drain Plumb Pak PP22601 2-Hole Trip Lever Style Tub Face Plate
Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Chrome Plated Fits 2" outlet. Trip lever for drain control. Includes screws.
SHOWER ARM W/FLANGE 6 CHROME  SHOWERHEAD MH/RV PREM CHROME  Plumb Pak PP826-1 2-Hole Trip Lever Style Tub Face Plate
Stainless steel construction. 6" shower arm fit 1/2" pipe thread. The adjustable head allows for a personalized shower experience. It is designed to fit 1/2" IPS connection and is easy to install for your indoor or outdoor showers. The chrome finish provides a clean appearance and it is constructed of a durable plastic. Trip lever for drain control. Includes screws.
Oatey Snap-Tite Round Drain Strainer Plumb Pak PP22510 Shower Arm With Flange Danco Versaspray Handheld Showerhead
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. 1/2" IPS. Handheld shower for tub spouts, easy installation with no tools required, 42" vinyl hose. Ideal for cleaning tub, bathing children and washing pets.
   
 
1 2 3 ... 6