Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING
Choose a sub category:
WRECKING BARS PRY BARS AND PULLERS NAIL & TACK PULLERS
NAIL SETS COLD CHISELS PUNCHES & DRIFTS
COLD CHISEL/PUNCH SETS HOLE PUNCHES AWLS AND BRAD DRIVERS
Sort By:
1 2 3
Stanley 58-113 Square Nail Set Stanley 58-111 Nail Set Stanley 58-112 Square Nail Set
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
Dasco 530-0 Center Punch Dasco 539-0 Prick Punch Dasco 540-0 Prick Punch
Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
Dasco 402-0 Cold Chisel Dasco 531-0 Center Punch Stanley 58-912 Square Nail Set
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
Stanley 58-911 Square Nail Set Stanley 58-913 Square Nail Set Toolbasix JLO-0323L  Tack Pullers
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of heat treated carbon steel blade with a square plastic handle.
Dasco 592-0 Pin Punch Dasco 541-0 Prick Punch Dasco 400-0 Cold Chisel
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
Dasco 401-0 Cold Chisel Dasco 405-0 Cold Chisel Dasco 582-0 Pin Punch
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Stanley 16-286 Cold Chisel Wonder Bar II 55-045 Flat Pry Bar Dasco 581-0 Pin Punch
Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Made with tempered steel and heat treated for increased durability. Able to withstand a bending momentum of 310 in-lbs with a high-visibility. Powder coated finish. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 532-0 Center Punch Stanley 16-287 Cold Chisel Dasco 583-0 Pin Punch
Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 584-0 Pin Punch Stanley 16-288 Cold Chisel General Tools 806 Jiffy Self-Center Punch
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Hardened steel pin, knurled body provides no slip grip, auto centering, and countersunk end. Used for creating starter screw holes.
Vaughan & Bushnell 222 Double Ended Mini Pry Bar Dasco 406-0 Cold Chisel Dasco 588-0 Pin Punch
High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 534-0 Center Punch Dasco 589-0 Pin Punch Dasco 590-0 Pin Punch
Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 431-0 Scratch Awl Dasco 408-0 Cold Chisel Dasco 253-0 Roll Pin Punch
One piece forged all American steel design tool features heat treated point for long life. Designed to start holes in soft wood and scribe or mark wood and other soft materials such as cardboard. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft.
Dasco 564-0 Solid Punch Dasco 565-0 Solid Punch Dasco 566-0 Solid Punch
Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
Great Neck Saw BD1 Magnetic Brad Nail Driver Mintcraft JLO-0093L  Pry Bars Dasco 337-0 Utility Chisel
Magnetic brad and nail driver with solid wood handle and spring action shaft. Drives finishing nails up to 1-1 /2" long without marring surface. Downward pressure on handle inserts nail. Made of dropped forged and heat treated steel with hexagon steel construction for enhanced strength. Single claw tool. Made from forged high grade American steel and heat treated to meet or exceed ANSI specifications. Larger "Targethead" striking area reduces mushrooming from repeated blows. Can be used for all around masonry for cutting, trimming and wedging.
Stanley 58-230 Square Head Nail Set Dasco 255-0 Roll Pin Punch Hyde Tools 45600 Pry Bar/Scrapers 20 16
Made of hardened and tempered alloy steel with square head, round knurled body; tips are cupped and chamfered. Square head prevents rolling; 4" inches long. Set contains (1) each: 1/32", 1/16", and 3/32". Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
Stanley 69-122 Scratch Awl Crescent FB7 Flat Pry Bar Vulcan 32941 Wrecking Bars
Heat treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter 3/16";  length 3-3/8". Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
Vaughan & Bushnell BT90 90 deg Double Ended Pry Bar Stanley 55-818 Ripping Chisel Dasco 413-0 Cold Chisel
Made from forged spring tempered steel with a 90 degree blade. Used for prying, pull nails, molding, and scraping. Extra wide claw. Beveled nail slot. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
Wonder Bar 55-515 Flat Pry Bar Dasco 417-0 Cold Chisel Estwing HC-10 Single Ended Handy Claw
Made from forged, heat treated, high-carbon steel with polished and beveled cutting edges. Contoured bar makes pulling nails, prying, lifting and scraping easier. Beveled nail slot at both ends. High visibility, powder coated finish. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from drop forged hard steel with a vinyl grip. Removes imbedded nails.
PRY BAR DBL END NAIL PLLR 11IN Dasco 410-0 Long Cold Chisel Dasco 606-0 Drift Punch
Made from drop forged and heat treated steel with hexagon steel construction for strength. Use for precision nail pulling and prying. Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service.
Dasco 419-0 Long Cold Chisel Dasco 91 Pry Bar Kit With Nail Puller Crescent FB13 Flat Pry Bar
Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Ideal for pulling trim, molding, baseboards, nails, scraping and cleaning flat surfaces; straight and curved blades with nail pullers; made from high carbon U.S.A. steel with full penetration heat treated for superior strength; kit includes (1) of each: 9" pry/trim/scraper bar, 5-1/2" Lil pry bar and 7-1/2" Ultra pry bar. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
   
 
1 2 3