Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS
Choose a sub category:
WATER HEATERS - ELECTRIC WATER HEATER ACCESSORIES WATER HEATER REPAIR PARTS
Sort By:
1 2
WASHER WATER HEATER SUPPLY    Danco 88493 Water Heater Washer Camco 11523 Drain Valves
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Water heater supply line washer. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Camco Mfg 11061 Dip Tube Camco 07133 Element Gasket Kit B and K 168-003NL Dielectric Unions
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Camco 10623 Dielectric Nipple B K Industries 168-004NL Dielectric Unions WaterFlex 0437018 Corrugated Flexible Water Heater Connector
For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
WaterFlex 0437012 Corrugated Flexible Water Heater Connector Camco 2143 High Watt Density Water Heater Element Camco 07223 Adapter Kit
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. UL Listed, gasket included. Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit.
B and K 167-004NL Dielectric Unions B and K 102-816 Water Heater Drain Valves WaterFlex 0437024 Corrugated Flexible Water Heater Connector
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Camco 2343 High Watt Density Water Heater Element Camco 11260 Drain Pan With 1 in PVC Fitting Camco 9973 Quick Change Element Tool
UL Listed, gasket included. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Just turn off power to change your element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water.
CopperFlex WB034-24N Corrugated Water Heater Connector Camco 2203 High Watt Density Water Heater Element Camco 7723 Dual Element Lower Water Heater Thermostat
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. UL Listed, gasket included. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat Camco 4363 High Watt Density Water Heater Element Camco 2243 High Watt Density Water Heater Element
UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed, gasket included. UL Listed, gasket included.
Camco Mfg 10473 Pressure Relief Valve 3/4 In Camco 11460 Drain Pan With 1 in PVC Fitting Camco 10023 Water Heater Continuity Tester With Battery
3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Test your elements and thermostats while still in the water heater. 1 piece.
CopperFlex WB00-12N Water Heater Connector Camco 2293 High Watt Density Water Heater Element Camco 2283 High Watt Density Water Heater Element
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. UL Listed, gasket included. UL Listed, gasket included.
B and K Industries 168-005NL Dielectric Unions Camco 2263 High Watt Density Water Heater Element Camco 4383 High Watt Density Water Heater Element
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. UL Listed, gasket included. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
CONNECTOR SS 3/4F1960X3/4X18IN Camco 4603 High Watt Density Water Heater Element Camco 3943 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL Listed, gasket included.
Camco 2223 High Watt Density Water Heater Element Camco 01023 Flapper Style Dielectric Heat Trap CopperFlex WB00-15N Water Heater Connector
UL Listed, gasket included. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 2-1/2" length MIP. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Camco 4483 High Watt Density Water Heater Element Camco 10063 Water Heater Connector Camco 2163 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum. UL Listed, gasket included.
Camco 2583 Low Watt Density Water Heater Element CopperFlex WB00-18N Water Heater Connector Camco 4503 High Watt Density Water Heater Element
UL & CSA listed, gasket included. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 4523 High Watt Density Water Heater Element Watts 100XL Temperature and Pressure Relief Valve Watts LL100XL-150/210 Temperature/Pressure Relief Valve
UL Listed, gasket included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Camco 2363 High Watt Density Water Heater Element Watts 100XL Temperature and Pressure Relief Valve Camco 4703 Low Watt Density Water Heater Element
UL Listed, gasket included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). UL Listed, gasket included.
WaterFlex 0437118 Corrugated Flexible Water Heater Connector CopperFlex WB00-24N Water Heater Connector Fluidmaster B1H12 Water Heater Connector
Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Camco 4803 High Watt Density Water Heater Element Watts 100XL-8-150 Temperature and Pressure Relief Valve Camco 4643 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 9953 Professional Element Socket Camco 20800 Drain Pan With 1 in PVC Fitting Camco 23503 Dielectric Union
Fits standard 1/2" socket drive to replace screw-in water heater elements. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.3 inches deep. Pre-cut side opening for drain fitting. Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines.
   
 
1 2