Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS > WATER HEATER REPAIR PARTS
Sort By:
1 2
WASHER WATER HEATER SUPPLY    Danco 88493 Water Heater Washer Camco 11523 Drain Valves
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Water heater supply line washer. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Camco Mfg 11061 Dip Tube Camco 07133 Element Gasket Kit B and K 168-003NL Dielectric Unions
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
B K Industries 168-004NL Dielectric Unions Camco 10623 Dielectric Nipple Camco 2143 High Watt Density Water Heater Element
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length. UL Listed, gasket included.
B and K 167-004NL Dielectric Unions B and K 102-816 Water Heater Drain Valves WaterFlex 0437012 Corrugated Flexible Water Heater Connector
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Camco 07223 Adapter Kit B and K Industries 168-005NL Dielectric Unions Camco 2343 High Watt Density Water Heater Element
Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. UL Listed, gasket included.
CopperFlex WB034-24N Corrugated Water Heater Connector WaterFlex 0437018 Corrugated Flexible Water Heater Connector Camco 2203 High Watt Density Water Heater Element
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. UL Listed, gasket included.
Camco 7723 Dual Element Lower Water Heater Thermostat Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat Camco 4363 High Watt Density Water Heater Element
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed, gasket included.
Camco 2243 High Watt Density Water Heater Element Camco Mfg 10473 Pressure Relief Valve 3/4 In CONNECTOR SS 3/4F1960X3/4X18IN
UL Listed, gasket included. 3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever.
CopperFlex WB00-12N Water Heater Connector Camco 2293 High Watt Density Water Heater Element Camco 2283 High Watt Density Water Heater Element
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. UL Listed, gasket included. UL Listed, gasket included.
Camco 2263 High Watt Density Water Heater Element Camco 4383 High Watt Density Water Heater Element Camco 4603 High Watt Density Water Heater Element
UL Listed, gasket included. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 3943 High Watt Density Water Heater Element Camco 2223 High Watt Density Water Heater Element Camco 01023 Flapper Style Dielectric Heat Trap
UL Listed, gasket included. UL Listed, gasket included. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP.
CopperFlex WB00-15N Water Heater Connector Camco 4503 High Watt Density Water Heater Element Camco 4483 High Watt Density Water Heater Element
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
WaterFlex 0437024 Corrugated Flexible Water Heater Connector Camco 10063 Water Heater Connector Camco 2163 High Watt Density Water Heater Element
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum. UL Listed, gasket included.
Camco 2583 Low Watt Density Water Heater Element Camco 4523 High Watt Density Water Heater Element CopperFlex WB00-18N Water Heater Connector
UL & CSA listed, gasket included. UL Listed, gasket included. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Watts 100XL Temperature and Pressure Relief Valve Camco 4703 Low Watt Density Water Heater Element Watts LL100XL-150/210 Temperature/Pressure Relief Valve
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). UL Listed, gasket included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Camco 2363 High Watt Density Water Heater Element Watts 100XL Temperature and Pressure Relief Valve Fluidmaster B1H12 Water Heater Connector
UL Listed, gasket included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Camco 4803 High Watt Density Water Heater Element CopperFlex WB00-24N Water Heater Connector Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Plumb Pak PP888-10LF Water Heater Connector Camco 23503 Dielectric Union Fluidmaster B4H18 Water Heater Connector
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Fluidmaster B3H18 Water Heater Connector Watts 100XL-8-150 Temperature and Pressure Relief Valve Camco 4643 High Watt Density Water Heater Element
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Fluidmaster B1H18 Water Heater Connector Fluidmaster B2H18 Water Heater Connector Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
   
 
1 2