Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > GAS VALVES
Sort By:
1
Mueller ProLine 2-Piece Gas Ball Valve VALVE 1/2IN FIP X FIP         Brass Craft PSBV503-8 Quarter Turn Gas Ball Valve
Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. Yellow handle. 1/2 PSI maximum working pressure. Brass Craft Gas Ball Valve, Quarter Turn, Series: PSBV503-8, 1/2 in, 5 psi, 32 - 125 deg F, FIPT End Connection, Forged Brass Body, PTFE Seat Trim, CSA Certified, Lever Handle Actuator, For Indoor and Outdoor
Brass Craft PSSL-12 Gas Ball Valves VALVE 3/8IN FIP X FIP         Brass Craft PSSD-41 Quarter Turn Gas Ball Valve
Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Yellow handle. 1/2 PSI maximum working pressure. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
Mueller ProLine 1-Piece Gas Ball Valve VALVE 1/2IN FIP X FIP 1 PIECE VALVE 3/4IN FIP X FIP
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Yellow handle. 1/2 PSI maximum working pressure. Yellow handle. 1/2 PSI maximum working pressure.
Brass Craft TBV6F-8 Quarter Turn Gas Ball Valve Brass Craft TBVF8 Quarter Turn Gas Ball Valve Mueller ProLine 2-Piece Gas Ball Valve
Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
VALVE 3/4IN FIP X FIP 1 PIECE Mueller ProLine 1-Piece Gas Ball Valve B K Industries 117-592 Gas Ball Valves
Yellow handle. 1/2 PSI maximum working pressure. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Forged brass 1-piece body. Chrome plated forged brass ball. Coated aluminum handle. 9/16''-24 fine thread flare for 3/8'' tube. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. Threaded flare ends comply with SAE F513. UPC coded bulk.
Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Mueller ProLine 1-Piece Gas Ball Valve Brass Craft PSBV503-12 Quarter Turn Gas Ball Valve
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Brass Craft Gas Ball Valve, Quarter Turn, Series: PSBV503-12, 3/4 in, 5 psi, 32 - 125 deg F, FIPT End Connection, Forged Brass Body, PTFE Seat Trim, CSA Certified, Lever Handle Actuator, For Indoor and Outdoor
VALVE1/2IN FIP X 15/16IN FLARE B and K Industries 115-503 Gas Ball Valve Brass Craft PSSC-61 Gas Ball Valves
Yellow handle. 1/2 PSI maximum working pressure. Forged brass 1-piece body with chrome-plated forged brass ball and coated aluminum handle. Threaded flare ends comply to SAE F513. For natural gas, also approved for use with water up to 175 PSI. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. UPC coded bulk. Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16.
VALVE 3/4IN FIP X 15/16 FLARE VALVE 3/4IN FIP X 5/8IN FLARE Brass Craft PSSC-60 Quarter Turn Gas Ball Valve
Yellow handle. 1/2 PSI maximum working pressure. Yellow handle. 1/2 PSI maximum working pressure. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
Mueller ProLine 1-Piece Gas Ball Valve B and K Industries 110-225/110-125 Gas Ball Valve Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve
1-piece body, chrome-plated forged brass ball, coated aluminum handle. Threaded ends comply with ANSI B1.20.1. CSA Certified. Threaded flare ends comply to SEA J513. CSA Z21 (PSIG) certified. -20 Deg. F ? 300 Deg. F temperature range, quarter-turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance, multi-directional flow, two-piece body design, chrome-plated brass ball, CSA - ANSI Z21.15, (1/2 PSIG), ANSI/ASME B16.44 (5G), UL listed, threaded ends comply with ANSI B1.20.1. Rated for 200 PSI -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
VALVE 1IN FIPX1IN FIP TEE HNDL Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve VALVE 1/2IN MIP X CSST DIRECT
Yellow handle. 1/2 PSI maximum working pressure. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Yellow handle. 1/2 PSI maximum working pressure.
VALVE 3/4IN MIP X CSST DIRECT
Yellow handle. 1/2 PSI maximum working pressure.
   
 
1