Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > WELL & JET PUMPS
Sort By:
1
PUMP SHALLOW WELL CAST 1/2HP  PUMP CONVERTIBL WELL CAST1/2HP PUMP JET SHALLOW WELL 3/4HP
Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. 1-1/4 NPT suction, 1" discharge/ drive port, 67 psi maximum pressure, 12.5 gpm flow rate, 1 year warranty from Superior Pump. Rugged cast iron pump body for durability, Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications.  1-1/4" NPT suction, 58 psi maximum pressure, 9.9 gpm mas flow rate, 1" discharge/ drive port.Deep well conversion assembly included. 6.4/3.2 amps. 1 year warranty from Superior Pump. 3/4 HP dual voltage motor (115/230v).  Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate.  Pre-mounted, fully adjustable pressure switch.For shallow well applications up to 25' depth. 7.8/3.9 amps, 1-1/4 NPT suction, 1" discharge/dirive port, 20/40 pressure switch, 74 psi max pressure, 13.75 gpm max flow rate. 1 year warranty from superior Pump.
Bur-Cam Pumps 506518SS Shallow Well Jet Pumps Bur-Cam Pumps 506321 Convertible Jet Pumps Sta-Rite Industries FP4012-10 Flotec
Stainless steel pump housing, easy to prime, totally enclosed fan cooled motor, up to 900 GPH, up to 65 PSI. Maximum vertical suction lift of 25 ft, high performance noryl impeller and built-in ejector, stainless steel rotor shaft and mechanical seal. 18 lb (8.18 kg). Cast iron convertible jet pump. SW operation 0-25' with ejector screwed on pump body. DW operation 0-80' with 2 pipes and ejector down in the well. High performance noryl impeller, industrial motor totally enclosed, fan cooled. full time connected run capacitor, to eliminate starting wear vs regular motor. thermal and overload protection, built for a continuous use. 1/2 hp TEFC motor, 115/230v. maximum pressure of 85 psi. capacity at 20 psi: 650 gph/ 5', 565 gph/10', 485 gph/15', 365 gph/20', 245 gph/25', 575 gph/30', 465 gph/40', 365 gph/50,' 170 gph/80,'  1" NPT suction. 1" NPT discharge. 38 lbs (17.27kg) Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
Wayne Pumps CWS50 Deep Well Jet Pumps Sta-Rite Industries FP4212-08 Flotec Sta-Rite Industries FP4022-08 Flotec
1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately). Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.8 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
PUMP JET CONV W/EJECT KIT 1HP Sta-Rite FSNCH-L Sta-Rite Wayne Pumps CWS75 Deep Well Jet Pumps
1 HP dual voltage motor (115/230v). Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications. 10/5 amps, 115/230 volt, 1-1/4" NPT suction, 71 psi max pressure, 13.2 gpm max flow rate. 1 year warranty from Superior Pump. Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dust-proof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4" NPT suction and 3/4" NPT discharge. Dual voltage 115/230V; factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt. Pressure switch setting 30-50. CSA certified. 1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).
Sta-Rite Industries FP4222-08 Flotec Sta-Rite Industries FP4032 Flotec Franklin Electric RJC-50 Red Lion
Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.8 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified. Ideal for use in shallow well (less than 25') and deep well (25' to 90') applications. Cast iron pump housing for heavy duty applications. 115/230 volt heavy-duty motor with voltage selector for simple connection to existing power source. Includes factory pre-wired 30/50 pressure switch that produces up to 76 PSI with automatic shut-off. 11 GPM.
Bur-Cam Pumps 506547SS Shallow Well Jet Pumps Franklin Electric RJC-75 Red Lion Sta-Rite FSNDH Sta-Rite
Stainless steel. 6.6 gallon tank, easy to prime, totally enclosed fan cooled motor, up to 900 GPH, up to 65 PSI, maximum vertical suction lift of 25 ft, high performance noryl impeller and built-in ejector. Pre-assembled for quick easy installation. Ideal for use in shallow well (less than 25') and deep well (25' to 90') applications.  For heavy duty applications.  115/230 volt heavy-duty motor with voltage selector for simple connection to existing power source.  Produces up to 71 PSI with automatic shut-off.  Cast iron pump housing.  Includes factor pre-wire 30/50 pressure switch.  18 GPM. Close-grained cast iron body and base, specially treated for corrosion resistance. Provides strong performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water. Drain port provided for easy winterizing. Pump primes faster and handles more air with a multi-port, precision-molded, reinforced polypropylene diffuser. Motor windings feature insulation materials that protect against excessive moisture and contaminants. Heavy-duty ball bearings are sealed, permanently lubricated, and tested to ensure extended life and smooth quiet operation. Built-in jet features a high strength poly-carbonate nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl impeller is precision molded for perfect balance, and is ultra smooth for highest performance and efficiency. Mechanical shaft seal is precision lapped and made of highly polished carbon-ceramic, stainless steel construction, with an internal design for continuous water lubrication. Balanced rotor is die cast under high pressures for uniform performance and greater efficiency. Pump and motor shaft are stainless steel for maximum corrosion resistance, with a one-piece threaded shaft for positive drive and alignment. Includes a dustproof cover to protect all electrical components from dirt, dusts, and insects. Pressure switch with adjustable cut-in and fixed differential (20 PSI). 115/230V
Franklin Electric RL12G05-3W2V Red Lion Bur-Cam Pumps 506532SS Shallow Well Jet Pumps Sta-Rite Industries SLC-L Sta-Rite Pro Jet
4" submersible deep well pump. Powered by a 3-wire, 230 volt industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box. .3/4 HP stainless steel pressure booster/ tankless jet pump system. Water supply pressure booster can be used to increase and maintain municipal water pressure.   Tankless shallow well jet pump to deliver constant pressure without annoying pressure fluctuations. Eliminates need for pressure switch or tank. Up to 900 GPH, 65 PSI, maximum vertical lift of 25ft. Electronic control prevents pump from running dry. Easy to install. No electrical wiring required. For booster pump applications, a water pressure regulator is required. Totally enclosed 115 Volt motor. Compact and portable design. The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 - 1 HP models. The ProJet SL convertible jets utilize easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages. Close-grained cast iron construction. Reinforced polypropylene diffuser with brass wear ring. One-piece threaded stainless steel shaft. High quality pressure switch with adjustable cut-in pressure settings. CSA certified.
Franklin Electric RL12G05-2W1V Red Lion Franklin Electric RL12G05-2W2V Red Lion Sta-Rite Industries FP2211 Flotec
4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified.
Sta-Rite Industries FP2212 Flotec Wayne Pumps SWS50-12P Shallow Jet Pump and Tank Franklin Electric RL12G07-2W2V Red Lion
For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. 1/2 HP cast iron shallow well jet pump conventional tank system (includes SWS50). Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. suction. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Max flow rate is 420 GPH at 0 ft. (50 PSI). Pressure switch is pre-set at 30-50 PSI for automatic operation. Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 25 ft. in depth. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Franklin Electric RL12G07-3W2V Red Lion Sta-Rite SLE-1 Sta-Rite Pro Jet Franklin Electric RL12G10-2W2V Red Lion
4" submersible deep well pump. Powered by a 3-wire, 230 volt industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box. The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 - 1 HP models. The ProJet SL convertible jets utilize easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages. Close-grained cast iron construction. Reinforced polypropylene diffuser with brass wear ring. One-piece threaded stainless steel shaft. High quality pressure switch with adjustable cut-in pressure settings. CSA certified. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Sta-Rite Industries FP2222 Flotec Sta-Rite Industries FP2232 Flotec Sta-Rite Industries MSE Sta-Rite
For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. The MS series vertical jet pumps are the industry standard deep well jet pumps for over-the-well "bolt-on" installations. The MS series jet pumps include the pre-plumbed external automatic regulator, pressure gauge, pressure switch, and a complete line of casing adapters to drive the 4" double pipe or 2" and 3" single pipe jet packages. Rugged cast iron body, stainless steel pump and motor shaft, and close-grained cast iron diffuser.
   
 
1