Home > FARM & RANCH > LIVESTOCK CARE & SUPPLIES > LIVESTOCK ACCESSORIES > STOCK TANKS
Sort By:
1
B & K 109-851 Tank Float Rod Assembly B & K 109-841 Nuzzle Assembly B & K 109-862 Tank Float
1/4-20 male threads on both ends, 1/4" rod diameter. Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint, and stem, threaded at one end. 1/4-20 thread on stem/thumb screw. Corrosion resistant, lightweight and suitable for a broad range of destructive fluids. Suitable for 175 degrees Fahrenheit. For open tank service only. Orange for ultra-violet light protection. 1/4-20 spud connector, for 1/2'' and 3/4'' Robert or Flippen valves.
CORD LOCK WATER-TIGHT ORANGE  CORD LOCK WATER-TIGHT GREEN   Watts STEM-13 Flippen Valve Stem
Provides water-tight connection. Keeps power cords from pulling apart. Use with power tools, lawn and garden equipment, outdoor lighting and tank deicers. Provides water-tight connection. Keeps power cords from pulling apart. Use with power tools, lawn and garden equipment, outdoor lighting and tank deicers. Brass with threads on both ends.
Watts STEM-12 Flippen Valve Stem Watts P6 Flippen Tank Float Watts P8 Flippen Tank Float
Brass with threads on both ends. Highly corrosion resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 degrees F. Highly corrosion resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 degrees F.
Watts P8-7 Flippen Watts N1-NA Flippen Nuzzle Assembly Dare-O-Matic 798 Economy Tank Float Valve
Highly corrosion resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 degrees F. Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to, or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Outer housing molded of high impact resin. Withstands weather and abuse. Durable molded float. Two sets of brackets. Fits poly tanks and steel tanks. 300 GPH.
Watts A1214 Flippen Valve Arm Kit Watts ST750 Flippen Standard Duty Float Valve Watts MN3 Flippen Replaceable Valve Arm
Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only. Bronze body with MNPT threaded inlet and outlet. Cotter pin pivot arm assembly. Replaceable plungers. Stem fitting: 1/4-20. Maximum pressure 125 psi. Maximum temperature 180 degrees F. Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only.
Watts N5-NA Flippen Nuzzle Assembly Watts JB3 Flippen Replaceable Valve Arm Newell Rubbermaid 5050-12 Tank Drain Plug
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to, or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end. Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only. For stock tank Nos.4242 (SKU 635.6257), 4243 (SKU 635.5978), 4244 (617.6580), 4245 (SKU 635.6471) and 4247.
B & K 109-813 Tank Float Valve Dare-O-Matic 1780 Tank Float Valve Watts ST1000 Flippen Standard Duty Float Valve
Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Precision die cast outer housing. Durable molded float. Includes two sets of brackets. Fits poly tanks and steel tanks. 300 GPH. Installation instructions included. Bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F.
Newell Rubbermaid 424806BLA Float Valve B & K 109-814 Tank Float Valve Dare-O-Matic 1800 Non-Siphon Tank Float Valve
Fits all sizes Rubbermaid stock tanks. Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Precision die-cast, durable molded float and molded non-siphoning unit. Complies with basic anti-siphoning regulations. Has a replaceable non-siphoning unit. 300 GPH.
Farm Innovators H4815 Floating De-Icer Farm Innovators H-429 Submergible De-Icer Ice Chaser C-250 Utility De-Icer
Heats the water, keeps open an ice-free area of approximately 30'' in diameter down to sub-zero temperatures. Thermostatically controlled to operate only when necessary. Heavy-duty float will not rust, corrode or leak. Special 10'' heating element. 6' heavy duty grounded wire. For use in METAL TANKS ONLY. Individually packed. 120 AC voltage, 1500 watts. Thermostatically controlled to operate only when necessary. Designed to rest in the bottom of the tank unnoticed by livestock. Protective sturdy cage permits use in all tanks. Safe in plastic. Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gallons.
Ice Chaser H418 Floating De-Icer Ice Chaser C-250M Utility De-Icer Farm Innovators UPH15 Drain Plug De-Icer
Thermostatically controlled to operate only when necessary. Keeps tanks up to 250 gallons from completely freezing during winter. Uses less electricity than traditional 1500 watt de-icers. Can be used in metal, plastic or rubber stock tanks. U.L. Listed. 120 AC voltage; 1250 watts. Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gallons. Quick, easy installation. Unnoticed by livestock, no cord in water. Safe in all tanks. Fits all Behlen, Freeland, Hastings, Rubbermaid, Applegate and all other plastic and metal tanks on the market. Thermostatically controlled to operate only when necessary. 1500 watts.
Watts ST2000 Flippen Standard Duty Float Valve Watts ST1250 Flippen Standard Duty Float Valve
Bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F. Bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F.
   
 
1