Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING
Choose a sub category:
MICRO TORCH KITS TORCH ACCESSORIES - SOLDER TORCH HEADS
SOLDER GUNS & IRONS ELEC SOLDERING GUN ACCESS SOLDER
FLUX MISC SOLDERING SUPPLIES
Sort By:
1 2
Oatey 30710 Acid Brush Oatey 30011 No. 5 Paste Flux Nokorode 14000 Regular Paste Flux
Use for applying liquid or paste fluxes. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
Nokorode Aqua Flux 74044 Paste Flux Oatey No. 95 Tinning Flux BRSH FLUX 3/PK 3/8IN
Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications. With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out. For liquid or paste soldering flux. 6" (152.4mm) long and 1/2" (12.7mm) wide. 3-pack.
Rectroseal C-Flux Soft Soldering Flux Oatey 53017 Lead Free Soldering Paste Flux Oatey No. 95 Tinning Flux
Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out.
Oatey 31410 Cleaning Brush Oatey 30130 Water Soluble Flux FLINT RENEWALS
One stainless steel bristled brush for cleaning threads on hard metal pipes and one with brass bristles for use on softer metals. Cleans threaded pipe and fittings, and much more. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. IAPMO listed. Flint renewals for spark lighter (5) individual flints.
Nokorode 14010 Regular Paste Flux Oatey 30013 No. 5 Paste Flux Nokorode Aqua Flux 74047 Paste Flux
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications.
Oatey 53185 Rosin Core Wire Solder PASTE FLUX FOR SOLDER 2 OZ    Oatey 53023 Rosin Leaded Core Solder
Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines. Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied. Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines.
LIGHTER FLINT SPARK           Oatey H-205 Water Soluble Flux Oatey 53012 Rosin Leaded Core Solder
Spark lighter with replaceable flints; used to ignite non-self-lighting torches. Flux for Copper Pipe. As thick as No. 5 flux. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. Made in USA. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F.
Safe-Flo 53061 Wire Solder Oatey H-2095 Water Soluble Tinning Flux Weller 7250W Standard Soldering Tip
Alloy of tin, silver, copper and bismuth; works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  .084" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. With solder powder added to pre-tin pipes. For potable plumbing, copper fire sprinkler and hydronic heating systems. Safe, lead free, water flushable. Resists burning, will not separate in extreme heat. Stays soft in cold weather. Excellent draw capabilities, as thick as No.5 flux. Meets ASTM B-813, IAPMO Listed. Made of copper, for Weller soldering guns. Specs: Tip Width O/D .22 in.; Reach/Length 2.57 in.
Rectroseal C-Flux Soft Soldering Flux LIQUID FLUX FOR SOLDER 2 OZ   Oatey 53010 Wire Solder
Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders. Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied. 50 percent tin and 50 percent lead, used with an external flux. Good flow characteristics and low melting point. 361 to 421 degrees Fahrenheit melting range; 0.075" diameter. Used for soldering galvanized gutters, general repairs, radiators, sheet metal and non-drinking water lines. Contains lead, not to be used for plumbing applications.
Oatey 53174 Acid Core Wire Solder Weller 7135W Standard Soldering Tip Weller 7135N Standard Soldering Tip
Lead free alloy of 95 percent Tin and 5 percent Antimony. Acid flux is contained within the core. Used for for sheet metal, radiator, gutter repair work with a melting range of 450 degrees F-464 degrees F; .081" gauge Made of copper, for Weller soldering guns. Specs: Tip Width O/D .165 in.; Reach/Length .885 in. Made of copper, for Weller soldering guns. Specs: Tip O/D  .165 inches; Reach/Length .885 inches.
Nokorode 14020 Regular Paste Flux Oatey 53011 Leaded Acid Core Solder SLDR 40/60-1/4LB 1/8IN
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. 40 percent tin and 60 percent lead alloy with acid flux contained in wire core; no external flux necessary. For sheet metal work, auto radiator repair, steel gutters and more. Not for use in electrical applications. 361 to 460 degrees Fahrenheit melting range. 0.081" diameter. Contains lead, NOT for plumbing applications. 40 percent tin, 60 percent lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C). NOT FOR ELECTRICAL CONNECTIONS.
CLOTH EMERY 80GRIT 1INX10YARD CLOTH EMERY 120GRIT 1INX10YARD CLOTH EMERY 180GRIT 1INX10YARD
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll. Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll. Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll.
CLOTH EMERY 320GRIT 1INX10YARD SOLDER 1/8IN SW40TIN/60L 1/4LB SPREADER FLAME
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll. 40 percent tin, 60 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C). NOT SUITABLE FOR ALUMINUM. Flame spreader.
Oatey 53019 Instant Wire Solder Oatey 53016 Rosin Core Solder SOLDER 3/32IN 40TIN/60L 1/4 LB
Easy to use; solder and flux all in one. Can be used on drinking water lines. Includes acid brush. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F. 40 percent tin, 60 percent lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C).
SLDR 50/50 3/32IN 1/4LB       SAND SCREEN 80 GRIT 1-1/2X9FT SAND SCREEN 120 GRIT 1-1/2X9FT
50 percent tin and 50 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 5500 PSI. Melting Temp: 421? (216? C). NOT SUITABLE FOR ALUMINUM. 1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals. 1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals.
SAND SCREEN 180 GRIT 1-1/2X9FT SAND SCREEN 320 GRIT 1-1/2X9FT Nokorode 14030 All Purpose Regular Paste Flux
1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals. 1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
Oatey 53027 Wire Solder SOLDERING IRON 30 WATT 110V   SOLDER 1/16IN 60TIN/40L 1/4LB
Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range. For fine wiring, hobbies, models, making jewelry, electronics, TVs, radios, stereos, games, toys, etc. 750 degrees F (398.9 degrees C) tip temperature. 60 percent tin, 40 percent lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile Strength: 6900 PSI. Melting Temp: 375? (190? C).
TORCH PROPANE BRASS PENCIL TIP SOLDER 1/8IN 95TIN/5ANT 1/4 LB Oatey 53015 Acid Core Wire Solder
Delivers a fine, concentrated flame for pinpoint heating; adjustable flame knob allows for flame control and fuel economy. General uses: soldering pipe; soft solder; thawing pipes; removing paint, tile and putty; lighting pilots and grills. Use with propane fuel only. Tin-antimony "lead-free" solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required. 40 percent tin-60 percent lead, .125" gauge; can not be used on drinking lines.
Safe-Flo 53062 Wire Solder Oatey 53176 Acid Core Wire Solder SOLDER COMM 1/8IN 1LB RSN CRE
Alloy of tin, silver, copper and bismuth. Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  0.117" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. Lead free alloy of 95 percent Tin and 5 percent Antimony. Acid flux is contained within the core. Used for for sheet metal, radiator, gutter repair work with a melting range of 450 degrees F-464 degrees F; .081" gauge Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Melting Temp: 575? (299? C).
SOLDER 1/8IN AC30TIN/70L 1/2LB SOLDER WIRE KITS WATER SOLUBLE Oatey 50193 Acid Core Wire Solder
30 percent tin, 70 percent lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile Strength: 4500 PSI. Melting Temp: 491? (255? C). NOT FOR ELECTRICAL CONNECTIONS. General uses: solder pipes, brazing metal, plumbing and automotive repairs. Product details: wire melting temperature: 450 degree F; diameter: 0.062"; wire net weight: .75 oz. silver solder; .5 oz. water soluble paste flux - NSF certified to ANSI/NSF61. Kit contents: 3 oz. solid wire solder, 1 oz. water soluble paste flux, 2-1/4" acid brush, abrasive cloth. Alloy of 40 percent Tin and 60 percent Lead. For repairing galvanized gutters, filling metal seams and other general repairs with a melting range of 360 degrees F - 460 degrees F. Can not be used on drinking water lines; .081" gauge.
   
 
1 2