Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS
Choose a sub category:
ROTARY HOBBY TOOLS ROTARY HOBBY TOOL ACCESSORIES ENGRAVERS
WOOD-BURNING TOOLS
Sort By:
1 2 3
Dremel 560 Cutting Bit Dremel 402 Mandrel Dremel 429 Felt Polishing Wheel
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 432 Drum Sander Band Dremel 422 Felt Polishing Tip Dremel 408 Drum Sander Band
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
Dremel 430 Drum Sander Band Dremel 8193 Grinding Stone Dremel 480 Collet
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 83322 Grinding Stone Dremel 481 Collet Dremel 462 Polishing Point
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Bosch Accessories 113 Engraving Cutters Dremel 932 Grinding Stone Dremel 952 Grinding Stone
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
Bosch 431  Oscillating Tool Accessories EZ-Lock 423E/423 Polishing Wheel Dremel 561 Spiral Cutting Bit
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM.
Dremel 512E Finishing Abrasive Buff Dremel 540 Cut-Off Wheel BRUSH CARBON STEEL 3/4IN 2PK
For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs. Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel. Ideal for cleaning and removing rust and corrosion from items made of brass, copper, gold or other soft ferrous metals. Perfect for getting into hard to reach places like slots. You can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces.
BRUSH CARBON STEEL 1/2IN 2PK  Dremel 107 Engraving Cutter Bosch 90930 Carbon Motor Brush
Ideal for cleaning and removing rust and corrosion. Use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. Dremel Engraving Cutter, 3/32 in Diameter, 9-9/16 in Length, Ball Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools.
Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone Dremel 953 Grinding Stone
Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
Dremel 453 Precision Ground Sharpening Stone DISC SANDING 240GRIT          Dremel EZ Lock Finishing Abrasive Buff Set
DISC SANDING 240GRIT
Our Price: $5.80
Used for sharpening chain saw blades, quickly and easily. Great for light shaping and sanding. EZ Lock for faster accessory changes. Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit.
BRUSH NYLON BRISTLE 3/4IN 2PK BRUSH NYLON BRISTLE 1/8IN 2PK WHEEL EMERY IMPREGNATED 1IN
Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding.
Dremel 199 High Speed Cutter Dremel 420 Cut-Off Wheel BRUSH CARBON STEEL 1/8IN 2PK
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Versatile brush for removing rust and corrosion. For use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots.
BRUSH STAINLESS STEEL 3/4IN   BRUSH STAINLESS STEEL 1/2IN   BRUSH STAINLESS STEEL 1/8IN
Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Great for polishing and cleaning.
BRUSH BRASS 3/4 INCH 2PK      BRUSH BRASS 1/2 INCH 2PK      BRUSH BRASS 1/8 INCH 2PK
Ideal for cleaning and surface finishing. Use on items made from gold, bronze, copper or brass. Use a brass brush to create a soft, sating or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel).
WHEEL SIC IMPREGNATED 1/2IN   Dremel 118 High Speed Cutter Dremel 124 Rotary Tool Bit
Designed for light stock removal and high luster polishing. Works on a variety of surfaces including steel, aluminum, brass, silver, hard plastics, gold and other metals. Impregnated with silicone abrasive and lubricant. Eliminates the need for polishing compound. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 144 Rotary Tool Bit Dremel 193 High Speed Cutter Dremel 409 Cut-Off Wheel
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel.
Dremel 9924 Replacement Engraving Point Quik-Change 4485 Collet Nut Kit Dremel 7134 Abrasive Wheel Point
Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving. Kit consisting of a special collet nut and four collets for use with a variety of Dremel tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8". Kit contains (1) each 1/8" Collet, 3/32" Collet, 1/16" Collet, 1/32" Collet and Collet Nut. High-speed cutter tipped with diamond particles tapered to a fine point for detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel.
Dremel 7144 Wheel Point Bit WHEEL KIT DIAMOND 3PIECE 3/4IN Dremel 502 Flap Wheel
High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. Diamond wheel kit includes (2) 3/4" (19.05 mm) diamond wheels and (1) 1/8" Mandrel. For cutting metal, glass, ceramics and plastics. Max rpm: 30,000. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 115 Rotary Tool Bit Dremel 504 Flap Wheel Dremel 503 Flap Wheel
Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Cylinder Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 426 Cut-Off Wheel Dremel EZ471SA Detail Coarse Abrasive Brush Dremel EZ472SA Detail Medium Abrasive Brush
Fiberglass reinforced, use for slicing and cutting metal, wood and plastic.  Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
   
 
1 2 3