Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - STRAIGHT LINK
CHAIN - TWIST LINK CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE CHAIN - PLASTIC
CHAIN - SPECIALTY GRAB HOOKS SLIP HOOKS
SHACKLES CHAIN - COLD SHUTS CHAIN - LAP LINKS
CHAIN - QUICK LINKS CHAIN - SNAP LINKS CHAIN - SWIVELS
CHAIN - CLEVIS LINKS SPECIALTY FARM HITCH PINS
ANCHOR SHACKLES CLEVISES & PINS SNAPS
WELDED RINGS CHAIN HOISTS LOAD BINDERS
POWER HOISTS ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 12
Speeco 07090100/2702 Standard Tractor Lynch Pin Speeco 07091900/3548 Standard Tractor Lynch Pin Speeco 07090400/2704 Standard Tractor Lynch Pin
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Campbell T7665012 Welded Ring National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link
LAP LINKS 1/8IN ZN PLT
Our Price: $0.74
LAP LINKS 3/16IN ZN PLT
Our Price: $0.80
Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
Fehr Bros 3/16 Anchor Shackle SHUT COLD ZINC PLATED 3/16IN  Campbell T5950124 Repair Lap Link
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
Speeco 07090800/2698 Tractor Lynch Pin Speeco 07091500/2709 Standard Tractor Lynch Pin Fehr Bros 1/4IN Anchor Shackle
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Campbell T4900324 Cold Shut Campbell T4900424 Cold Shut Campbell T7665032 Welded Ring
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
National Hardware 3153BC Cold Shut National Hardware 3152BC Lap Link National Hardware 3155BC Ring
COLD SHUTS 1/4IN ZN PLT
Our Price: $1.06
LAP LINKS 1/4IN ZN PLT
Our Price: $1.06
RINGS #7X1IN ZN PLT
Our Price: $1.06
National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Zinc Plated, 195 lb Load Capacity, For Rope, Chain and Strap
SPRING SNAP STEEL ZN 3/16     National Hardware 3155BC Ring National Hardware 3155BC Ring
RINGS #4X1-1/4IN ZN PLT
Our Price: $1.11
RINGS #3X1-1/2IN ZN PLT
Our Price: $1.15
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. National Hardware Ring, Series: 3155BC, NO 4 X 1-1/4 in, Steel, Zinc Plated, 270 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: 3155BC, NO 3 X 1-1/2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap
Campbell T7661152 Welded Ring National Hardware 3153BC Cold Shut National Hardware 3155BC Ring
RINGS #7X1IN BRS
Our Price: $1.17
Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Brass, 195 lb Load Capacity, For Rope, Chain and Strap
Campbell T7660841 Welded Ring Speeco 07094000/00266 Round Loop PTO Locking Pin Speeco 07093900/00276 Square Loop PTO Locking Pin
Campbell Welded Ring, NO 4 Chain, 1-1/4 in Length X 0.22 in Wire Size, Steel, Zinc Plated, 200 lb Load Capacity Numerous farm, lawn, and garden and industrial applications. 2-1/4 usable inches, zinc-plated.
Campbell T4900524 Cold Shut Campbell T7665042 Welded Ring Fehr Bros 5/16 Anchor Shackle
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, NO 3 Chain, 1-1/2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
National Hardware 3156BC Ring RING BRASS NO4X1-1/4IN        Campbell T4900624 Cold Shut
RINGS 1IN SLD BRS
Our Price: $1.31
RINGS #4X1-1/4IN BRS
Our Price: $1.31
National Hardware Ring, Series: 3156BC, 1 in, Solid Brass, 195 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: N244, Suitable For Use With: Connecting Rope, Chain or Strap, NO 4 x 1-1/4 in, Steel, Brass, 270 lb Load Capacity Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
BREACHING SNAP ZN 2-1/2       Speeco 07095100/00264 Round Loop PTO Locking Pin Midland Big Orange 081163/MC645G Anchor Shackle
. Numerous farm, lawn, and garden and industrial applications. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
Baron 1407 Open Eye Spring Snap Baron 2450-1/4 Snap Link Speeco 07091300/3027 Tractor Lynch Pin
Baron Spring Snap, Open Eye, 9/32 in Snap Opening, 3-3/8 in Overall Length, Steel, Nickel Plated WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Forged fasteners for numerous farm and other applications. 3 pins. Black powder coat finish.
CHAIN SNAP ZN PLT 3/8X3-9/16IN SHUT COLD ZINC PLATED 3/8IN   Campbell T7665001 Welded Ring
COLD SHUTS 3/8IN ZN PLT
Our Price: $1.51
Designed to use with #1 & #2 chains in home, farm, and recreational applications. Open eye is designed to be closed with vice or hammer after attachment. Swivel eye eliminates tangling. Steel eye, body and gate. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Campbell Welded Ring,, 2 in Length X 0.26 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
SPRING SNAP RNDEYE SWVL 3/8   Speeco 07094100/00265 Round Loop PTO Locking Pin Speeco 07096400/00275 Square Loop PTO Locking Pin
Numerous farm, lawn, and garden and industrial applications. 2-1/4 usable inches, zinc-plated.
National Hardware 3156BC Ring National Hardware 3050BC Swivel Eye Spring Snap National Hardware 3116BC Bit Snap
RINGS 1-1/8IN SLD BRS
Our Price: $1.57
National Hardware Ring, Series: 3156BC, 1-1/8 in, Solid Brass, 215 lb Load Capacity, For Rope, Chain and Strap National Hardware Spring Snap, Swivel Eye, Series: 3050BC, 20 lb Load Capacity, 7/16 in Snap Opening, 2 in Overall Length, Die Cast Zinc, Nickel Plated, For Rope, Animal Leashes and Other Home, Farm and Recreational Applications National Hardware Bit Snap, Series: 3116BC, 115 lb Load Capacity, 5/16 in Snap Opening, 1-3/4 in Overall Length, Steel, Zinc Plated, For use with harnesses and for making other quick connections
RING BRASS NO3X1-1/2IN        Koch 4022613 Wire Hair Pin Clip Midland Big Orange 081213/MC646G Anchor Shackle
RINGS #3X1-1/2IN BRS
Our Price: $1.57
National Hardware Ring, Series: N244, Suitable For Use With: Connecting Rope, Chain or Strap, NO 3 x 1-1/2 in, Steel, Brass, 300 lb Load Capacity Yellow zinc plated. Used in farm, lawn & garden and other applications to secure attachments and pins. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
WELDED RING ZINC 1-1/8        SNAP LINK 9/32                SNAP SPRG INTRLK ZN 1/4X2IN
Campbell Welded Ring, NO 7B Chain, 1-1/8 in Length X 0.19 in Wire Size, Solid Bronze, Polished, 150 lb Load Capacity WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring.
Speeco 66351 Roller Chain Connecting Link Baron 5300-3/8 Round Eye Swivel Bolt Snap SPRING SNAP RNDEYE SWVL 1/4
High quality ASA Standard chain links. Every pin, bushing, roller and side plate is shot-peened during production to increase metal fatigue resistance. Heavy roller chain (i.e. 60H or 80H roller chain) provides extra thickness of side plates which affords greater capacity of shock load without experiencing side plate metal fatigue. Baron Bolt Snap, Round Eye Swivel, 1/4 in Snap Opening, 3/8 in Eye Inside Diameter, 2-1/4 in Overall Length, Die Cast Zinc, Nickel Plated Baron Spring Snap, Round Swivel Eye, 20 lb, 3/16 in Snap Opening, 1/4 in Eye Width, 1-7/8 in Overall Length, Steel, Zinc Plated
National Hardware 3156BC Ring QUICK-LINK ZINC PLATED 1/8IN  National Hardware 3114BC Breeching Snap
RINGS 1-1/4IN SLD BRS
Our Price: $1.77
National Hardware Ring, Series: 3156BC, 1-1/4 in, Solid Brass, 235 lb Load Capacity, For Rope, Chain and Strap Designed for fast, easy connections between two lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Steel body construction. National Hardware Breeching Snap, Series: 3114BC, 85 lb Load Capacity, 5/16 in Snap Opening, 2-1/4 in Overall Length, Steel, Zinc Plated, For use with harnesses and for making other quick connections
   
 
1 2 3 ... 12